The solubility of palladium chloride complexes with organic ligands in supercritical carbon dioxide (SC-CO2) was measured. The possibility of using SC-CO2 as a working medium for the preparation and regeneration of deposited palladium catalysts was studied. The active catalyst component was deposited from solutions of palladium chloride complexes with organic ligands in SC-CO2. The regeneration of catalysts deactivated during the hydrogenation of acetylene in an ethane-ethylene mixture was also performed in SC-CO2 with varying process conditions. A comparison of the specific surface areas and activities of freshly prepared and regenerated samples showed that the methods suggested were highly competitive compared with the traditional regeneration techniques.
1 December 2016 in Russian Journal of Physical Chemistry B
The solubility of ammonium palmitate in supercritical carbon dioxide is studied in the dynamic regime at 308.15–333.15 K and 10.0–35.0 MPa. Experimental data are described in the framework of the Peng–Robinson equation of state.
Results from studying the supercritical fluid СО2-extraction regeneration of DN-3531 industrial nickel–molybdenum hydrotreatment catalyst in the temperature range of 323.15–383.15 K, at pressures of up to 30 MPa, and with modification of the basic extragent with such polar compounds as chloroform, methanol, ethanol, acetone, and dimethylsulfoxide (DMSO), are presented. The order of modifiers corresponds to the increase in the solubilizing ability of modified supercritical carbon dioxide (SC-СО2) with respect to catalyst- deactivating deposits. With DMSO as the most efficient modifier, however, not only are deactivating compounds removed but nickel and molybdenum as well, considerably reducing the final activity of a regenerated sample. During extraction regeneration, the content of coke in the catalyst is reduced by two-thirds, while the specific surface area and the pore volume grow. The activity of the deactivated catalyst in dibenzothiophene hydrodesulfurization (HDS) and naphthalene hydrogenation grows by several hundred per cent after one-time SC-CO2 treatment and is 2.5 times higher than for a sample regenerated using the traditional oxidative method.
1 December 2019 in Russian Journal of Physical Chemistry B
—The influence of the method of determining the vapor pressure of various substances on the accuracy of the description of their solubilities in supercritical carbon dioxide is studied. It is shown that in most cases the computational methods of Clapeyron, Lee–Kesler, Riedel, Frost–Kolkuorf–Todos, and Riedel–Plank–Miller do not allow experimental data to be described with acceptable accuracy (up to 10–12%). The accuracy of the description of solubility is significantly increased by using the saturated vapor pressure as the second fitting parameter in addition to the coefficient of binary interaction. It is suggested to use the described approach to indirectly determine the saturated vapor pressure of substances through the description of their solubilities. It is shown that the results obtained using this approach are much better consistent with the experimental data than those obtained by the above mentioned calculation methods.
1 December 2022 in Russian Journal of Physical Chemistry B
The solubility of copper(II) acetylacetonate in supercritical carbon dioxide was studied using a circulation unit created based on the R-401 supercritical fluid extraction system. The results were compared with the literature data. The solubility of the complex was additionally studied at 323 and 333 K. The applicability of various copper metal complex compounds in impregnation treatment of polymer materials was considered.