Bamboo is the building material of the past and future. It offers numerous properties that make it versatile for various applications, including construction. Its impressive strength-to-weight ratio enables it to bear substantial loads and stresses, while its good elasticity allows efficient energy absorption. However, its mechanical properties can vary based on factors such as species, age, locations, methods, and treatment. Treating bamboo is essential to enhance its properties and durability. The literature provides various natural and chemical treatments that enhance some of the properties but also reported drawbacks regarding higher temperature, content, and duration. This paper reviewed 57 articles from the Scopus database, specifically focusing on article–document-type publications from the years 2003 to 2023. Additional references were also incorporated to address concerns in properties, treatment, and standards to provide systematic understanding. With extensive assessment of the articles, the following gaps and concerns were observed, and recommendations for further study and assessment were made: the bamboo’s properties, the development of centralized guidelines and procedures for the preparation and processing; the exploration of alternative materials to reinforce bamboo without compromising its ductility; and the development of joint connections, and testing of mechanical properties considering seismic, wind and vibration. For treatment methods, the standardization of procedures using natural, chemical, or a combination. Lastly, for bamboo codes and standards, the assessment of existing codes and standards for testing the mechanical properties of bamboo, highlighting the potential limitations and areas, uniformity, and differences with all existing similar standards. By filling these gaps, it can support the reliability and robustness of bamboo as a sustainable material, fostering its promotion and adoption in the construction industry.

Bamboo is the building material of the past and future. It offers numerous properties that make it versatile for various applications, including construction. Its impressive strength-to-weight ratio enables it to bear substantial loads and stresses, while its good elasticity allows efficient energy absorption. However, its mechanical properties can vary based on factors such as species, age, locations, methods, and treatment. Treating bamboo is essential to enhance its properties and durability. The literature provides various natural and chemical treatments which enhanced some of the properties but also reported a drawbacks on higher temperature, content and duration. This paper reviewed 57 articles from Scopus database, specifically focusing on article-document type publications from the years 2003 to 2023. Additional references were also incorporated to address concerns in properties, treatment and standards to provide systematic understanding. MATLAB was utilized for data text analytics. With extensive assessment on the articles, the following gaps and concerns were observed and recommends for further study and assessment such as for bamboo properties, the development of centralized guidelines and procedures for the preparation and processing; exploration of alternative materials to reinforce bamboo without compromising its ductility; development of joint connections, and testing of mechanical properties considering seismic, wind and vibration. For treatment methods, the standardization of procedures using natural, chemical or combination. Lastly, for bamboo codes and standards, assessment of existing codes and standards for testing the mechanical properties of bamboo highlighting the potential limitations and areas, uniformity, differences with all existing similar standards. By filling these gaps, it can support the reliability and robustness of bamboo as a sustainable material, fostering its promotion and adoption in construction industry.

Current research into the production of sustainable construction materials for retrofitting and strengthening historic structures has been rising, with geopolymer technology being seen as an advantageous alternative to traditional concrete. Fiber reinforcement using this novel cementitious material involves a low embodied carbon footprint while ensuring cohesiveness with local materials. This study aims to develop fly ash-based geopolymers reinforced with six different types of fibers: polyvinyl alcohol, polypropylene, chopped basalt, carbon fiber, and copper-coated stainless steel. The samples are produced by mixing the geopolymer mortar in random distribution and content. Twenty-eight geopolymer mixes are evaluated through compressive strength, split-tensile strength, and modulus of elasticity to determine the fiber mix with the best performance compared with pure geopolymer mortar as a control. Polyvinyl alcohol and copper-coated stainless-steel fiber samples had considerably high mechanical properties and fracture toughness under applied tensile loads. However, the polypropylene fiber source did not perform well and had lower mechanical properties. One-way ANOVA verifies these results. Based on these findings, polyvinyl alcohol and stainless-steel fibers are viable options for fiber reinforcement in historical structures, and further optimization and testing are recommended before application as a reinforcement material in historic structures.

The destructive aftermath of storms and typhoons in the Philippines more prominently affects isolated remote locations that lack methodical and strategic procedures to address the situation. One form of assistance provided during disasters is the construction of shelters, which can be categorized as emergency, temporary, or transitional, serving as protection during recovery periods. Cold-formed steel (CFS) is widely used, and its versatility in fabrication and configurability make it an ideal candidate for building emergency shelters that are lightweight, easy to assemble, upgradeable, and cost-effective. This research aims to address gaps in existing modalities for emergency shelters during typhoon disasters through proposing an alternative design that uses CFS based on internationally accepted standards. The methodology is divided into three (3) phases, namely (1) analytical design and modeling, (2) cost sustainability assessment, and (3) shelter implementation plan. Three (3) different configurations with 4, 6, and 8 studs per wall face were designed and optimized using Midas Gen based on governing wind loads. The final frame design consisted of fully cross-braced along the failing direction, with an increase in uniform thickness of members. All of which checked for adequacy and connections designed accordingly. The overall cost was quantified lower than that of the traditionally used shelter design in terms of cost, covered area, and lifespan by a significant margin. All important information and findings are aligned in an original shelter implementation manual to ensure the shelter is aligned with the current situation in the Philippines.

In this work, a conceptual framework is proposed for translating microbial research into usable design tools in an urban built environment. This study on Microbiomes of the Built Environment (MoBE), specifically the cultivable microbial count, incorporates building code and built environment design factors applied in the Philippine setting. The National Building Code of the Philippines with focus on minimum habitable room specifications was used to provide basis for the framework process. Human presence and ventilation were used as parameters to produce data that can be used as design tools. Using passive air sampling, the three experiments were conducted within Metro Manila according to the proposed framework. The first experiment using settle plates of culture media in the morning and afternoon seeks to understand how bacterial and fungal counts are affected in a naturally ventilated and in a non-ventilated room. The second and third experiments were done to test the effects of different window sizes and the number of humans on bacterial count, respectively. Results showed higher bacterial count in the room with natural ventilation compared to the room with no ventilation. The use of different window sizes did not show significant difference in counts with the number replicates used but as the number of humans in the area increased, the bacterial counts also increased. Data produced in the preliminary experiments were used to conceptually design a space in this paper. The authors suggest that this building-code inspired framework be used as a guide for MoBE studies as a starting point and be further developed to understand and eventually produce healthier built environments.