As a short-chain PFAS (per- and polyfluoroalkyl substance), GenX was produced in recent years to replace traditional long-chain PFASs, such as perfluorooctanoic acid (PFOA). However, GenX turns out to be more toxic than people originally thought, posing health risks as a persistent environmental pollutant. In this research, for the first time, we incorporated chlorella, a single-celled green freshwater microalga that grows worldwide, with polyacrylonitrile (PAN) in equal amounts in electrospun nanofibers and studied the capability of the electrospun PAN/Algae bicomponent nanofibrous membrane (ES(PAN/Algae)) to bind and remove GenX from water. The incorporation of algae demonstrated a synergistic effect and significantly improved the GenX removal efficiency of the nanofibrous membrane. The maximum GenX removal capacity reached 0.9 mmol/g at pH 6, which is significantly higher than that of most of the reported GenX adsorbents as well as activated carbon. The GenX removal mechanism was investigated and discussed by using water contact angle, zeta potential, FTIR, and XPS techniques. This research demonstrated the potential to make highly efficient adsorbent/filter materials from common and economic materials to practically remediate short-chain PFASs from various water bodies.

A supercapacitor is an electrical energy storage system with high power output. With worldwide awareness of sustainable development, developing cost-effective, environmentally friendly, and high-performance supercapacitors is an important research direction. The use of sustainable components like wood biochar in the electrode materials for supercapacitor uses holds great promise for sustainable supercapacitor development. In this study, we demonstrated a facile and powerful approach to prepare meso-microporous carbon electrode materials for sustainable and high-performance supercapacitor development by electrospinning polyacrylonitrile (PAN) with F-treated biochar and subsequent aerogel construction followed by stabilization, carbonization, and carbon activation. The resultant carbon nanofibrous aerogel electrode material (ENFA-FBa) exhibited exceptional specific capacitance, attributing to enormously increased micropore and mesopore volumes, much more activated sites to charge storage, and significantly greater electrochemical interaction with electrolyte. This electrode material achieved a specific capacitance of 407 F/g at current density of 0.5 A/g in 1 M H₂SO₄ electrolyte, which outperformed the state-of-the-art specific capacitance of biochar-containing electrospun carbon nanofibrous aerogel electrode materials (<300 F/g). A symmetric two-electrode cell with ENFA-FBa as electrode material showed an energy density of 11.2 Wh/kg at 125 W/kg power density. Even after 10,000 cycles of charging-discharging at current density of 10 A/g, the device maintained a consistent coulombic efficiency of 53.5% and an outstanding capacitance retention of 91%. Our research pointed out a promising direction to develop sustainable electrode materials for future high-performance supercapacitors.

As a new and promising reinforcing filler, electrospun glass nanofibers (EGNFs) have attracted attention in the field of polymer composite materials. However, the reinforcing effectiveness of surface-modified EGNFs using different silane coupling agents in epoxy resin is still not quite clear. In this research, a series of silane coupling agents with increasing chain lengths in the order of methyl trimethoxysilane (MTMS), (3-aminopropyl) triethoxysilane (APTES), (3-glycidyloxypropyl) trimethoxysilane (GPTMS), and dual silane coupling agent APTES–GPTMS were employed to carry out surface treatment on the EGNFs. The pristine and silane functionalized EGNFs were then incorporated into epoxy resin as reinforcing fillers at low loading levels, i.e., 0.25 wt.%, 0.5 wt.%, and 1 wt.%, and the mechanical properties of the resultant epoxy nanocomposites, including strength, stiffness, ductility, and toughness, were evaluated. A commercial product of glass nanoparticles (GNPs) was used as a control to compare the reinforcing effectiveness of the EGNFs and the GNPs. This study revealed that the EGNFs could provide significant reinforcing and toughening effects at ultra-low loading (0.25 wt.%) in epoxy nanocomposite materials. Furthermore, surface modification of the EGNFs with silane coupling agents with long chain lengths, e.g., by using dual silane coupling agents, APTES–GPTMS, could enhance the interfacial bonding between the EGNFs and the epoxy matrix and further increase the mechanical performance of the EGNF-reinforced epoxy nanocomposite materials. Through this research, we realized epoxy nanocomposite materials with much-improved mechanical properties, i.e., 37%, 24%, 18%, 57% improvement in strength, stiffness, ductility, and toughness, respectively, with respect to those of the cured neat epoxy material with an ultra-low loading (0.25 wt.%) of APTES–GPTMS–EGNFs. Our research paves the road for developing lighter and stronger epoxy nanocomposite materials with EGNFs.

The swine industry generates millions of gallons (thousands of cubic meters) of wastewater every day, posing significant environmental risk due to high concentrations of organics and nutrients. This study aims to investigate the effectiveness of attached-growth anaerobic bioreactors for treating swine wastewater by utilizing sulfate-reducing bacteria, focusing on the impact of chemical oxygen demand (COD)/sulfate mass ratios on organics degradation. A series of lab-scale anaerobic bioreactors were employed to treat swine wastewater for a 14-day period. The study evaluated changes in pH, acidity, alkalinity, COD, sulfate, and various nutrients along with total suspended solids (TSS) and volatile suspended solids (VSS) before and after treatment. At a COD/sulfate mass ratio of 2:1, the bioreactors achieved optimum removal efficiencies of 80% for TSS, 83% for VSS, 86–88% for COD, 82–87% for sulfate, 73% for sulfide, and 73% for sulfite. The nutrient removal efficiency was 67% for nitrate and 72% for nitrite. The acidity and alkalinity were effectively controlled, with alkalinity values reaching up to 2161 ± 92.5 mg/L and pH within the range of 7–7.24. The findings demonstrated that anaerobic bioreactor at a COD/sulfate mass ratio of 2:1 significantly enhanced the degradation of organic matter coupling with sulfate reduction in swine wastewater, providing an efficient and sustainable treatment method.

This study shows the tunable optical and pseudocapacitance properties of off-stoichiometric famatinite phase Cu_3−aSb_1+bS_4±c nanostructures, relating morphology, point defects, and phase quality to applications in solar energy and energy storage.

Algae is a promising sustainable feedstock for the generation of bio-crude oil, which is a sustainable alternative to fossil fuels, through the thermochemical process of hydrothermal liquefaction (HTL). However, this process also generates carbon particles (algae-derived carbon, ADC) as a significant byproduct. Herein, we report a brand-new and value-added use of ADC particles as a reinforcing agent for epoxy matrix composites (EMCs). ADC particles were synthesized through HTL processing of Chlorella vulgaris (a green microalgae) and characterized for morphology, average size, specific surface area, porosity, and functional groups. The ADC particles were subsequently integrated into a representative epoxy resin (EPON 862) as a reinforcing filler at loading levels of 0.25%, 0.5%, 1%, and 2% by weight. The tensile, flexural, and Izod impact properties, as well as the thermal stability, of the resulting EMCs were evaluated. It is revealed that the ADC particles are a sustainable and effective reinforcing agent for EMCs at ultra-low loading. Specifically, the ADC-reinforced EMC with 1 wt.% ADC showed improvements of ~24%, ~30%, ~31%, and ~57% in tensile strength, Young’s modulus, elongation at break, and work of fracture (WOF), respectively, and improvements of ~10%, ~37%, ~24%, and ~39% in flexural strength, flexural modulus, flexural elongation at break, and flexural WOF, respectively, as well as an improvement of ~54% in Izod impact strength, compared to those corresponding properties of neat epoxy. In the meantime, the thermal decomposition temperatures at 60% and 80% weight loss of the abovementioned ADC-reinforced EMC increased from 410 °C to 415 °C and from 448 °C to 515 °C in comparison with those of neat epoxy. This study highlighted the potential of sustainable ADC particles as a reinforcing agent in the field of polymer matrix composite materials, which represented a novel and sustainable approach that would mitigate greenhouse gas remission and reduce reliance on nonrenewable reinforcing fillers in the polymer composite industry.