This paper presents the pioneering results of successful target detection using a fully operational and cooperative 5G cellular network as a source of illumination in a passive radar system. The electromagnetic wave generated by the real-life base station allowed for remote sensing of a moving car in bistatic geometry, which shows the feasibility of passive radar in which new generation radio networks serve as an illuminator of opportunity. The paper describes passive radar principles, the theoretical fundamentals of the 5G signal structure, and proposed processing for 5G network-based passive radar. Also, the 5G passive radar demonstrator is described, and the trial results showing the possibilities and limitations of using new radio standards in the context of passive radars.
Numerous indoor positioning technologies and systems have been proposed to localize people and objects in large buildings. Wi-Fi and Bluetooth positioning systems using fingerprinting have gained popularity, due to the wide availability of existing infrastructure. Unfortunately, the implementation of fingerprinting-based methods requires time-consuming radio surveys to prepare databases (RSSI maps) that serve as a reference for the radio signal. These surveys must be conducted for each individual building. Here, we investigate the possibility of using simulated RSSI maps with fingerprinting-based indoor localization systems. We discuss the suitability of the two popular radio wave propagation models for the preparation of RSSI reference data: ray tracing and multiwall. Based on an analysis of several representative indoor scenarios, we evaluated the performance of RSSI distribution maps obtained from simulations versus maps obtained from measurement campaigns. An experimental positioning system developed by the authors was used in the study. Based on Bluetooth Low Energy beacons and mobile devices (smartphones), the system uses fingerprinting followed by a particle filter algorithm to estimate the user’s current position from RSSI measurements and a reference spatial RSSI distribution database for each Bluetooth beacon in the building. The novelty of our contribution is that we evaluate the performance of the positioning system with RSSI maps prepared both from measurements and using the two most representative indoor propagation methods, in three different environments in terms of structure and size. We compared not only the three RSSI maps, but also how they influence the performance of the fingerprint-based positioning algorithm. Our original findings have important implications for the development of indoor localization systems and may reduce deployment times by replacing reference measurements with computer simulations. Replacing the labor-intensive and time-consuming process of building reference maps with computer modeling may significantly increase their usefulness and ease of adaptation in real indoor environments.
Time wavelength division multiplexing passive optical network (TWDM-PON) allows numerous users to share a single optical fiber and wavelength. In TWDM-PON, the optical network unit (ONU) has different upstream and downstream user traffic to serve by utilizing a limited amount of optical resources. Dynamic wavelength and timeslot scheduling play an important role in managing user traffic variation. As it is known, delay is one of the most important performance parameters of TWDM-PON. This motivates us to investigate the delay optimization problem and solve it through resource scheduling. To optimize delay performance, we propose a greedy graph coloring algorithm (GGCA) to assign the timeslots for upstream packet transmissions dynamically. Moreover, we also propose a Hungarian algorithm (HA) to solve the wavelength scheduling problem within the scheduled timeslots by the GGCA. Numerical simulations show that the proposed GGCA and HA provide approximately 70-80% delay reduction compared to a fixed baseline algorithm that schedules the timeslots and the wavelength in a fixed manner.
This paper introduces a new sequence-detection method with maximum-likelihood-metrics for user movement tracking. Our new algorithm utilizes reference data and measured received signal strength indicator (RSSI) data to search for the most likely movement paths represented as sequences of indoor zones. We demonstrate that the proposed modification can bring about a significant improvement of user movement path estimation compared to our original method.