The implementation of Industry 5.0 necessitates a decrease in the energy consumption of industrial robots. This research investigates energy optimization for optimal motion planning for a dual-arm industrial robot. The objective function for the energy minimization problem is stated based on the execution time and total energy consumption of the robot arm configurations in its workspace for pick-and-place operation. Firstly, the PID controller is being used to achieve the optimal parameters. The parameters of PID are then fine-tuned using metaheuristic algorithms such as Genetic Algorithms and Particle Swarm Optimization methods to create a more precise robot motion trajectory, resulting in an energy-efficient robot configuration. The results for different robot configurations were compared with both motion planning algorithms, which shows better compatibility in terms of both execution time and energy efficiency. The feasibility of the algorithms is demonstrated by conducting experiments on a dual-arm robot, named as duAro. In terms of energy efficiency, the results show that dual-arm motions can save more energy than single-arm motions for an industrial robot. Furthermore, combining the robot configuration problem with metaheuristic approaches saves energy consumption and robot execution time when compared to motion planning with PID controllers alone.
Energy usage in robotic applications is rapidly increasing as industrial robot installations grow. This research introduces a novel approach, using the rapidly exploring random tree (RRT)-based scheme for optimizing the robot’s motion planning and minimizing energy consumption. Sampling-based algorithms for path planning, such as RRT and its many other variants, are widely used in robotic motion planning due to their efficiency in solving complex high-dimensional problems efficiently. However, standard versions of these algorithms cannot guarantee that the generated trajectories are always optimum and mostly ignore the energy consumption in robotic applications. This paper proposes an energy-efficient industrial robotics motion planning approach using the novel flight cost-based RRT (FC-RRT*) algorithm in pick-and-place operation to generate nodes in a predetermined direction and then calculate energy consumption using the circle point method. After optimizing the motion trajectory, power consumption is computed for the rotary axes of a six degree of freedom (6DOF) serial type of industrial robot using the work–energy hypothesis for the rotational motion of a rigid body. The results are compared to the traditional RRT and RRT* (RRT-star) algorithm as well as the kinematic solutions. The experimental results of axis indexing tests indicate that by employing the sampling-based FC-RRT* algorithm, the robot joints consume less energy (1.6% to 16.5% less) compared to both the kinematic solution and the conventional RRT* algorithm.
Efficient operation of robotic manipulators in constrained workspaces requires careful coordination of robot placement, motion planning, and posture optimization. This paper presents a hierarchical optimization framework that addresses these challenges for robot placement, motion planning, and posture determination for multi-target manipulation tasks. Initially, the workspace layout is optimized using an adaptive genetic algorithm to determine robot placement that maximizes reachability and task efficiency. Subsequently, a surrogate-assisted rapidly-exploring random tree (SA-RRT) algorithm generates collision-free paths from the start to target configurations, leveraging machine learning models to reduce computational cost while preserving path quality. Finally, the robot’s posture is optimized via a second genetic algorithm to achieve a single configuration that allows rapid access to all target positions. The effectiveness of the proposed framework was evaluated through extensive simulations in a Unity-based environment, comparing SA-RRT against the conventional target-biased nearest neighbor (TNN-RRT) algorithm. In particular, the proposed SA-RRT algorithm reduces path planning computation time by 76.17% compared to TNN-RRT and also yields lower path cost, demonstrating both efficiency and path quality improvement. Overall, the framework provides a unified methodology for integrating layout planning, motion planning, and posture optimization, facilitating more effective deployment of robotic manipulators in industrial environments.