Background: The purpose of this research was to investigate the effects of disinfection and three different sterilization methods on the dimensional changes and mechanical properties of three-dimensional (3D) printed surgical guide for implant therapy. The objective was to assess the effects of sterilization procedures in 3D printed drill guide templates with destructive and non-destructive material testing. Methods: Fifteen identical drill guide templates were produced using a 3D printer. The surgical guides were classified into five groups: three controls, three disinfected (4% Gigasept®, 60 min), three plasma sterilized, three autoclave sterilized (+ 1 bar, 121 °C, 20 min), and three autoclave sterilized (+ 2 bar, 134 °C, 10 min). The templates were digitalized with a Steinbichler SCAN ST 3D scanner. Length was measured under an SZX16 stereomicroscope. A scanning electron microscope was used to study the surface morphology of the drill templates. The hardness, and flexural and compressive strength were measured to assess any changes in the physical characteristics of the material caused by sterilization. The drill guide templates were also examined with a Dage XiDAT 6600 X-ray. During the X-ray examinations, the following parameters were used: 100 kV voltage, 128 AVG averaging, 0.8 W power. One-way analysis of variance (ANOVA) was used to detect the difference between groups. Results: Evaluation of the hardness measurements of the various specimens shows that the hardness of the material was not changed by the plasma sterilization (p = 0.0680), steam sterilization on 121 °C (p = 0.6033) or disinfection process (p = 0.1399). The statistical analysis revealed significant difference in hardness strength of the autoclave sterilized (134 °C) specimens (p = 0.0002). There was no significant difference between the goups regarding the scanning electron microscopic and stereomicroscopic examinations. There was no significant difference regarding the X-ray visibility of the templates to the effect of the disinfection (p = 0.7844), plasma sterilization (p = 0.4091) and steam sterilization on 121 °C (p = 0.9277) and steam sterilization on 131 °C (p = 0.093). The effect of the sterilization was the same in case of both flexural and compressive strength of the material. Conclusions: Our findings indicate that plasma sterilization and steam sterilization at 121 °C were both suitable for sterilizing the tested 3D printed surgical guides.

This study aims to characterize tumor-infiltrating macrophages (TAMs), myeloid-derived suppressor cells (MDSC), and the related molecular milieu regulating anti-tumor immunity in limited-stage neuroendocrine (NE)-high and NE-low small cell lung cancer. Primary tumors and matched lymph node (LN) metastases of 32 resected, early-stage SCLC patients were analyzed by immunohistochemistry (IHC) with antibodies against pan-macrophage marker CD68, M2-macrophage marker CD163, and MDSC marker CD33. Area-adjusted cell counting on TMAs showed that TAMs are the most abundant cell type in the TME, and their number in tumor nests exceeds the number of CD3 + T-cells (64% vs. 38% in NE-low and 71% vs. 18% in NE-high). Furthermore, the ratio of CD163-expressing M2-polarized TAMs in tumor nests was significantly higher in NE-low vs. NE-high tumors (70% vs. 31%). TAM density shows a strong positive correlation with CD45 and CD3 in tumor nests, but not in the stroma. fGSEA analysis on a targeted RNAseq oncological panel of 2560 genes showed that NE-high tumors exhibited increased enrichment in pathways related to cell proliferation, whereas in NE-low tumors, immune response pathways were significantly upregulated. Interestingly, we identified a subset of NE-high tumors representing an immune-oasis phenotype, but with a different gene expression profile compared to NE-low tumors. In contrast, we found that a limited subgroup of NE-low tumors is immune-deserted and express distinct cellular pathways from NE-high tumors. Furthermore, we identified potential molecular targets based on our expression data in NE-low and immune-oasis tumor subsets, including CD70, ANXA1, ITGB6, TP63, IFI27, YBX3 and CXCR2.

Background: Oxidative stress is an important factor in the pathomechanism of atherosclerosis. Advanced oxidation protein products (AOPPs) are considered markers of oxidative stress. Thickening of the carotid intima-media layers indicates subclinical atherosclerosis and can be detected by carotid ultrasound.Objective: Our aim was to examine the association between carotid intima-media thickness (CIMT) and the level of AOPPs.Methods: Carotid duplex scans and measurements of AOPPs were performed on 476 participants of a cardiovascular population study. The presence of conventional cardiovascular risk factors was investigated with a questionnaire, physical examination, and laboratory tests.Results: There was a positive correlation between maximum CIMT and the level of AOPPs only in the male population (r = 0.219,p = 0.033). Multivariate analysis has revealed that the association between AOPPs and mean or maximum CIMT was independent of cardiovascular risk factors (OR = 1.458,p = 0.004, and OR = 2.038,p < 0.001).Conclusions: Among males, the elevated level of AOPPs as a marker of oxidative stress may signal the existence of early atherosclerotic alterations.

Following a stroke, balance disturbances often persist despite full recovery of the paretic side. The aims were to determine how long postural instability could be detected after stroke and the differences in post-stroke patients under and above 65 years of age. Static and dynamic posturography (passing weights from hand to hand around the body) measurements were performed on 29 patients with stroke after 3 ± 2.4 years (≤65 years) and 4.7 ± 3.3 years. (> 65 years) compared with 38 controls. Only the pathway and the velocity assessed by dynamic posturography were significantly higher (p < 0.05) in the younger group of patients compared with the controls. The older group of patients had significantly elevated parameters measured by both static (p < 0.01) and dynamic posturography (p < 0.05). we conclude, using a sensitive and reproducible method to assess both static and dynamic adjustments to maintain balance, that postural instability is significantly greater in post-stroke patients than control subjects. This difference is demonstrable up to 4 years after stroke, despite full recovery of the affected side.

Uveal melanoma (UM) is the most common primary malignant ocular tumour in adults, although its epidemiology in Central and Eastern Europe is unclear. This study aimed to analyse the incidence and all-cause mortality of UM in Hungary. This nationwide, retrospective, longitudinal study used data from the National Health Insurance Fund and included patients aged ≥18 years who were newly diagnosed with UM (ICD-10 C69.3 or C69.4) between 1 January 2012 and 31 December 2021. Age-standardised incidence and all-cause mortality rates were calculated using European Standard Population data from 2013. We identified 88 and 70 new patients with UM in 2012 and 2021, respectively, showing an almost stable trend. Age-standardised incidence rates varied between 6.40 and 10.96/1,000,000 person-years (PYs) during the analysed period. The highest age-standardised incidence was detected among men (13.38/1,000,000 PYs) in 2015. All-cause mortality decreased from 4.72/1,000,000 PYs to 0.79/1,000,000 PYs between 2012 and 2021. In conclusion, the UM incidence rate in Hungary is comparable to European incidence rates. The incidence did not markedly change, whereas all-cause mortality decreased during the study period, but this decline could not be attributed to improved treatment modalities for primary tumours and metastatic UM.