Among many indoor positioning technologies, pseudolite positioning technology has become an important supplement to GNSS. In indoor open environments, pseudolite positioning technology can usually perform high-precision positioning. However, in a complex environment, the pseudolite receiver is seriously interfered by multipath and other interference signals, which will lead to a serious decline in the observation accuracy, signal lock loss or even no positioning results. Therefore, this work proposes a pseudolite indoor anti-multipath receiver based on reference multipath estimating delay lock loop (Ref-MEDLL). It adds the Ref-MEDLL multipath estimator module and the multipath mitigation module to the traditional receiver signal processing architecture. In the multipath mitigation module, the multipath estimation adaptive mitigation of vector tracking (MEAM-VT) method and the multipath estimation direct mitigation (MEDM) method for multipath mitigation is proposed. Experimental results show that the Ref-MEDLL multipath estimation method has good adaptability to multipath signals that have different time delays and different amplitudes; both the MEDM receiver and the MEAM-VT receiver have good multipath mitigation performance. The MEAM-VT method performs better than the MEDM method in multipath mitigation and tracking, but the stability of the pseudorange observations of the MEAM-VT method is not as good as that of the MEDM method. The positioning accuracy of the MEDM receiver and the MEAM-VT receiver has been improved to different degrees in static positioning experiments and dynamic positioning experiments.

Pseudolite (PL) positioning technology is one of the effective methods to achieve high-precision indoor positioning. The Distributed Array Pseudolite System (DAPLS) is a ground-based augmentation architecture designed to provide high-precision positioning in GNSS-denied or indoor environments. However, maintaining the stability and integrity of pseudolite signals in distributed deployments remains a significant challenge. To address this, a Pseudolite Monitoring Station (PMS) was developed for real-time signal observation, performance evaluation, and anomaly detection. The proposed PMS integrates a multi-channel front-end, signal-processing engine, and monitoring algorithms capable of continuous assessment across three hierarchical levels: Signal Quality Monitoring (SQM), Receiver Processing Monitoring (RPM), and Measurement Quality Monitoring (MQM). To integrate multi-domain monitoring results, a Composite Quality Index (CQI) model is introduced, combining normalized sub-scores through weighted fusion to reflect overall system integrity. A comprehensive Signal Quality Assessment (SQA) framework is further introduced, including four dimensions of evaluation: constellation status, time reference, spatial coordinate reference, and signal anomaly detection. An indoor DAPLS experiment was conducted within a laboratory-level test field. The system comprised three pseudolite transmitter arrays (six transmitters each) and a central monitoring station. Experimental results showed stable synchronization within ±5 ns, coordinate accuracy within 0.2 m, and consistently high signal quality. The monitoring station effectively detected minor signal distortions and synchronization deviations, confirming its diagnostic precision and robustness. This study demonstrates a complete monitoring and evaluation framework for DAPLS, enabling both system-level quality assurance and signal integrity monitoring. The proposed PMS and SQA methods provide essential tools for future deployment of pseudolite-based indoor positioning and timing systems.