The dissolution of calcium ions in concrete in a low-alkalinity environment is an important factor causing a significant increase in the porosity of internal concrete, leading to a deterioration in its mechanical properties and affecting the durability of the concrete structure. In order to improve the reliability of concrete durability design and significantly increase the service life of concrete structures located in soft water environments, it is crucial to establish an analytical method to predict the elastic modulus (Edc) of cement slurry systems suffering from calcium dissolution. Firstly, the hydrated cement particles are regarded as a three-phase composite sphere composed of unhydrated cement particles (UC), a high-density hydrated layer (H-HL), and a low-density hydrated layer (L-HL). By introducing the equivalent inclusion phase (EQ) composed of UC and H-HL, the three-phase composite sphere model can be simplified into an equivalent hydrated cement particle model composed of EQ and L-HL. Finally, the Edc of the two-phase composite sphere composed of the equivalent hydrated cement particles and the porosity of the dissolved cement slurry system are solved by using elasticity theory. The effectiveness of the developed analytical method is verified by comparing it with third-party numerical results. Based on this method, the effects of hydration degree, volume ratio of calcium hydroxide (CH) to hydrated calcium silicate (C-S-H), and volume ratio of inner C-S-H to outer C-S-H on the Edc of the dissolved cement slurry system are analyzed. The parameter analysis indicates that among the three influencing parameters, the hydration degree has the greatest effect on the Edc of the dissolved cement slurry system. This study provides an analytical method for predicting Edc, which can provide some references for the durability design of concrete after calcium dissolution.

Fly ash is a by-product of coal-fired thermal power plants and offers great potential for the use of resources. To effectively improve the durability of reinforced concrete structures in marine environment and achieve waste to treasure, fly ash is widely used as a pozzolanic material due to its long-hydration characteristics and effects of micro-aggregate, micro-filling and secondary hydration. In this study, both the experimental investigation and numerical simulation are carried out to study the chloride transport characteristics of fly ash cement paste. The variation in chloride diffusivity with fly ash content, water-to-binder ratio and curing age up to 360 days is studied via accelerated conductivity measurement, and it is found that the above three experimental variables have a significant impact on the chloride diffusivity. For the influence of the dosage of fly ash, the optimum dosage is 30%. By introducing specific rules for the particle distribution, the fresh fly ash cement paste is first made. Based on the volume change characteristics of fly ash and cement particles after hydration, the vector hydration model of fly ash cement paste is established by considering the water shortage effect caused by hydration layer interference. After the accuracy of this hydration model is verified by the results from third-party experiments, the random walk algorithm is proposed to calculate the diffusion coefficient of the reconstructed mineral admixture cement paste. By comprehensive comparison with the experimental results from the third-party and self-conducted experiments, the numerical model for predicting the chloride diffusivity of fly ash cement paste is verified.