The automotive industry is rapidly transitioning to electric vehicles (EVs) in response to the global efforts to reduce greenhouse gas emissions. Lithium-ion battery (LIB) has emerged as the main tool for energy storage in electric vehicles. A widespread adoption of EVs, however, requires a fast-charging technology that can significantly reduce charging time while avoiding any unsafe conditions including short circuits due to failure of the separator in an LIB cell. Therefore, it is necessary to understand the mechanical stresses during fast charging and their long-term effect on the integrity of the separator. This paper presents a novel hybrid model for the prediction of the stress distribution in the separator of a pouch cell under various charging speeds, ambient temperatures, and pack assembly conditions, such as compressive pressures. The proposed hybrid model consists of three sub-models, namely, an electrochemical cell model, a lumped-parameter model, and a solid mechanics model. A robust parameter identification scheme is implemented to determine the model parameters using the experimental data. The separator within the test setup will experience maximum von Mises stress of 74 MPa during 4C charging, i.e., when the charge current in A is four times as high as the capacity of the battery cell in Ah. To assess the evolution of the damage in the separator under the estimated stress during fast charging, creep and fatigue tests are conducted on the separator. Their results indicate a progressive accumulation of damage in the separator, further emphasizing the importance of understanding and mitigating mechanical degradation in separator materials.
9 January 2009 in The International Journal of Advanced Manufacturing Technology
This paper presents a novel dynamic optimization framework for the grinding process in batch production. The grinding process exhibits time-varying characteristics due to the progressive wear of the grinding wheel. Nevertheless, many existing frameworks for the grinding process can optimize only 1 cycle at a time, thereby generating suboptimal solutions. Moreover, dynamic scheduling of dressing operations in response to process feedback would require significant human intervention with existing methods. We propose a unique dynamic programming–evolution strategy framework to optimize a series of grinding cycles depending on the wheel condition and batch size. In the proposed framework, a dynamic programming module dynamically determines the frequency and parameter of wheel dressing while the evolution strategy locates the optimal operating parameters of each cycle subject to the constraints on the operating ranges and part quality. Case studies based on experimental data are conducted to demonstrate the advantages of the proposed method over conventional approaches.
13 February 2018 in Journal of Applied Electrochemistry