Electrospinning is an economical and relatively simple method to produce continuous and uniform nanofibers from almost any synthetic and many natural polymers. Because of the high specific surface area, tunable pore size, and flexibility, the nanofibrous membranes are finding an increasingly wide range of applications. Some particular attention has been devoted to antibacterial nanofibers for applications such as wound dressings. A variety of biocides, e.g.,antibiotics, quaternary ammonium salts, triclosan, biguanides, (silver, titanium dioxide, and zinc oxide) nanoparticles and chitosan have been incorporated by various techniques into nanofibers that exhibit strong antibacterial activity in standard assays. However, the small diameters of the nanofibers also mean that the incorporated biocides are often burst released once the materials are submerged in an aqueous solution. Nevertheless, several strategies, such as core‐sheath structure of the nanofiber, covalent bonding of the biocide on the fiber surface and adsorption of the biocide in nanostructures, can be utilized to sustain the release over several days. This review summarizes recent development in the fabrication of antibacterial nanofibers, the release profiles of the biocides and their applications inin vivosystems. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2014,131, 40797.

The feasibility of fabricating polypropylene (PP) nanofibers has been explored by using different additives, such as sodium oleate (SO), poly(ethylene glycol) (PEG) and poly(dimethyl siloxane) (PDMS), during melt electrospinning. PP of high melt flow index (1000) was used with PEG and PDMS for the reduction of the melt viscosity; and it was used with SO for improving the electrical conductivity during melt electrospinning. It was observed that all the additives used in this study helped to reduce the fiber diameter. The most promising additive, SO, was effective in reducing the fiber diameter to the nanometer scale due to the increase in the electrical conductivity. The fiber diameter was decreased by the addition of PEG and PDMS due to the decrease in the melt viscosity. The effect of die shape on the fiber cross-sectional shape was analyzed and an interesting finding is that the die shapes did not have an effect on the cross-sectional shape of the fibers. That is, irrespective of the die shapes (i.e. trilobal, tetralobal, multilobal and circular) used in this study, the cross-sectional shapes of melt electrospun fibers were circular. The distribution of the additives in the fiber was analyzed by energy-dispersive X-ray analysis and was found to be uniform. Tensile tests were performed on single nanofibers with limited success, due to the problems in preparing fiber samples and successfully holding them in the jaws of the testing machine without slippage.