The hypersonic flow past a controlled rudder mounted at a gap to the aircraft fuselage is numerically investigated by solving three-dimensional (3D) Reynolds-averaged Navier–Stokes equations. This paper aims to explain the mechanism of production of extreme thermal environment faced by a rudder shaft from the view of physics of flow in the mounting gap. Simulations are conducted at Mach number of 10, and the gap ratio h/δ varies from 0 to 1.42, where h denotes the gap height and δ represents the thickness of the incoming turbulent boundary layer. Topological theory is utilized to identify the separation types. The formation of vortices is traced by extracting volume streamlines in the 3D space. The results indicate that the types of 3D separation appear in the gap shifts from the coexistence of horseshoe-type and tornado-type separations to only horseshoe-type separation that persists with the increase of h/δ. It is found that high heat flux is generated by the high-momentum fluid transported toward the surface by the horseshoe vortices. The tornado-type vortex prevents the incoming flow from arriving at the rudder shaft, which avoids the generation of high heat flux at the center of the rudder shaft. The rate of local heat transfer increases with h/δ as a result of the shrink and disappearance of the tornado-type vortices, which means that the region of low-speed backflow in front of the rudder is reduced and vanished. This study contributes to a clearer understanding of the flow physics in the complex disturbance area.
This study investigates the flowfield patterns and distributions of surface heat flux due to interactions among three-dimensional shock waves at the junction of the body and wing of an aircraft by ...
In this study, oblique-shock/bow-shock interference is theoretically and numerically studied with two incident shock waves. The transition criteria between the two modes of multiple shock–shock interference, i.e., the concomitant-jet (CJ) and dual-jet (DJ) modes, are given. The oblique shock relationship and shock polar analysis are utilized to obtain the analytical solution of the transition condition. The theoretical results indicate the existence of a dual solution interval (DSI) that widens with increasing Mach number and narrows with increasing deflection angle induced by the first incident shock wave. The DSI obtained by numerical simulation is considerably narrower than that theoretically predicted due to the advanced CJ→DJ and DJ→CJ transitions. The analysis reveals that the transitions are advanced due to the downstream disturbance and secondary waves in the flow field.
This paper investigates the flowfield patterns and distributions of surface heat flux of the cantilevered injection system for oblique detonation engine inlets. Three-dimensional complex shock wave/boundary layer interaction and shock wave/shock wave interaction between injectors are studied by solving Navier–Stokes equations under laminar flow conditions. The results indicate that there are three possible positions of localized peak heat flux, i.e., the leading edge of the injector near the bottom, the inlet wall surface below the injector, and the downstream of the injector sidewall. All the regions of high heat flux are related to flow reattachment or stagnation. Three types of flow patterns are observed along the inlet surface, i.e., partial separation, completely regular separation, and completely nonregular separation, resulting in increasingly complex distributions of heat flux. The localized peak heat flux which appears at the leading edge and the sidewalls of the injectors can reach values dozens of times higher than the undisturbed region within the interaction region.
Rapid prediction of aerodynamic and aerothermal surface fields is critical for the design and real-time monitoring of cross-domain flight vehicles, yet conventional computational fluid dynamics (CFD) remains prohibitively expensive. Here, a condition-driven globally aware point cloud network (CD-GPN) is presented, achieving millisecond-scale, near-CFD-accuracy predictions of surface pressure and heat flux. Based on PointNeXt, CD-GPN integrates three core components: geometrically enhanced inverted residual modules for local geometric perception; a condition feature modulation mechanism via feature-wise linear modulation to inject flight conditions into deep feature streams; and a global interaction module on condition-modulated latent modes to capture long-range flow-field correlations. Extensively tested across Mach 5–15, altitudes of 20–40 km, and angles of attack of 0°–10°, CD-GPN outperforms mainstream baselines. Specifically, it yields a mean normalized root mean square error of 1.77% for single-configuration pressure prediction, and 1.03% and 2.07% for multi-configuration pressure and heat flux predictions, respectively. Furthermore, it demonstrates good extrapolation robustness to unseen flight conditions and novel geometries, and transfer fine-tuning with only a small number of target-configuration samples can further reduce the cross-topology blind-prediction error. Meanwhile, in terms of efficiency, it reduces the single evaluation time from 45 min (CFD) to 134 ms. These results establish CD-GPN as an efficient, physics-aware surrogate bridging offline simulation and online monitoring for next-generation aerospace vehicle design.