In this study we design and test a novel solar tracking generation system. Moreover, we show that this system could be successfully used as an advanced solar power source to generate power in greenhouses. The system was developed after taking into consideration the geography, climate, and other environmental factors of northeast China. The experimental design of this study included the following steps: (i) the novel solar tracking generation system was measured, and its performance was analyzed; (ii) the system configuration and operation principles were evaluated; (iii) the performance of this power generation system and the solar irradiance were measured according to local time and conditions; (iv) the main factors affecting system performance were analyzed; and (v) the amount of power generated by the solar tracking system was compared with the power generated by fixed solar panels. The experimental results indicated that compared to the power generated by fixed solar panels, the solar tracking system generated about 20% to 25% more power. In addition, the performance of this novel power generating system was found to be closely associated with solar irradiance. Therefore, the solar tracking system provides a new approach to power generation in greenhouses.

In recent years, flexible sensors based on laser-induced graphene (LIG) have played an important role in areas such as smart healthcare, smart skin, and wearable devices. This paper presents the fabrication of flexible sensors based on LIG technology and their applications in human–computer interaction (HCI) systems. Firstly, LIG with a sheet resistance as low as 4.5 Ω per square was generated through direct laser interaction with commercial polyimide (PI) film. The flexible sensors were then fabricated through a one-step method using the as-prepared LIG. The applications of the flexible sensors were demonstrated by an HCI system, which was fabricated through the integration of the flexible sensors and a flexible glove. The as-prepared HCI system could detect the bending motions of different fingers and translate them into the movements of the mouse on the computer screen. At the end of the paper, a demonstration of the HCI system is presented in which words were typed on a computer screen through the bending motion of the fingers. The newly designed LIG-based flexible HCI system can be used by persons with limited mobility to control a virtual keyboard or mouse pointer, thus enhancing their accessibility and independence in the digital realm.

To calculate the ultimate load of the lattice boom accurately, the effective length factor and imperfection factor are introduced to the current stability factor formula. First, we propose a stability factor formula by conducting a series of tests of high-strength steel tubes under axial compression and analyzing the experimental data. Second, the effective length factor of the chord which is caused by braces is calculated on the basis of different effective length factors and stability curves. Then, the correctness of the proposed effective length factor and the stability factor formula are proved by destructive tests under three loading modes. Using the modified stability factor formula, the accuracy of ultimate load of lattice boom is enhanced. These findings will be of great value for improving the design level of lattice boom and providing a theory and test basis for the completion of the buckling design method of the high-strength steel tubes.

This article introduces the importance of data processing to the production process and the application of data in the digital twin workshop. Then the overall process of data processing is introduced. First, several typical data acquisition methods are listed, feed the collected data to the digital twin model, and then extract the model data for integration and convert it into the same XML text format. Perform data cleaning and data analysis on it, and then use the DBN in deep learning to extract and classify the data to complete the real-time matching and transmission of production information to employees. Finally, the future development direction of the data analysis will be briefly summarized.

Optimal wheel alignment improves fuel efficiency, safety, and driver comfort. An explicit formula for determining kingpin parameters, namely, caster and kingpin inclination angle (KIA), in four-wheel alignment is lacking. Currently, caster and KIA values are estimated by repetitive large-scale computing with a mathematical model aimed at obtaining values infinitely close to real solutions. In this study, a four-wheel aligner calibration device was used to collect large amounts of data for a variety of four-wheel aligner measurements with a short data interval. The data were subjected to the local fractal dimension analysis with fractional dimension-based blanket technology (BT) to optimize the number of measurement points. Dramatic changes in data were attributable to local areas with a large fractional number dimension. Appropriate increase in the number of calibration measuring points in areas with a relatively low fractional number dimension can reduce the overall quantity of measuring points. The results provide a scientific basis for the development of alignment calibration standards and demonstrate that these parameters can be assessed based on a small number of measurements. Our BT-based methodology can facilitate factory inspection and performance testing of four-wheel aligners and may improve the accuracy of wheel positioning parameter assessments.