Green roofs are artificial ecosystems that provide a nature-based solution to environmental problems such as climate change and the urban heat island effect by absorbing solar radiation and helping to alleviate urban environmental, economic, and social problems. Green roofs offer many benefits in terms of heat and water conservation as well as in terms of energy costs. This work proposes the design of an extensive and environmentally sustainable green roof for the Faculty of Engineering building in Bilbao. The green roof will be made from the composting of food waste generated in the building’s own canteen. Therefore, the main objective of this study is to calculate the solar efficiency of a sustainable green roof, evaluate its thermal performance, and quantify the impact that its implementation would have on energy consumption and the thermal comfort of its users. The results obtained confirm that an environmentally sustainable green roof has a positive effect on summer energy consumption and that this effect is much greater when there is water on the roof, as shown by the difference in energy savings between the dry (−53.7%) and wet (−84.2%) scenarios. The data show that in winter the differences between a green roof and a non-vegetated roof are not significant. In this case, the estimated energy consumption penalty (0.015 kWh/m2) would be 10% of the summer gain.
Sustainable development is essential for the future of the planet. Using passive elements, like ventilated facades based on insulation and air chambers, or living walls, which are solutions based on nature, is a powerful strategy for cities to improve their thermal environment, reduce energy consumption, and mitigate the effects of climate change. This approach allows for the quantification of the influence of passive surfaces on energy fluxes compared to bare surfaces. In addition, it delves into understanding how the incorporation of vegetation on building facades alters surface energy fluxes, involving a combination of physical and biochemical processes. This comprehensive investigation seeks to harness the potential of passive and natural solutions to address the pressing challenges of urban sustainability and climate resilience. This research uses a surface energy balance model to analyze the thermal performance of two facades using experimental data from a PASLINK test cell. This study uses the grey box RC model, which links continuous-time ordinary differential equations with discrete measurement data points. This model provides insight into the complex interplay among factors that influence the thermal behavior of building facades, with the goal of comprehensively understanding how ventilated and green facades affect the dynamics of energy flow compared to conventional facades. The initial thermal resistance of the bare facade was 0.75 (°C m2)/W. The introduction of a ventilated facade significantly increased this thermal resistance to 2.47 (°C m2)/W due to the insulating capacity of the air chamber and its insulating layer (1.70 (°C m2)/W). Regarding the modular living wall, it obtained a thermal resistance value of 1.22 (°C m2)/W (this vegetated facade does not have an insulating layer). In this context, the modular living wall proved to be effective in reducing convective energy by 68% compared with the non-green facade. It is crucial to highlight that evapotranspiration was the primary mechanism for energy dissipation in the green facade. The experiments conclusively show that both the modular living wall and open-ventilated facade significantly reduce solar heat loads compared with non-passive bare wall facades, demonstrating their effectiveness in enhancing thermal performance and minimizing heat absorption.
The integration of Mechanical Ventilation with Heat Recovery (MVHR) systems into heritage buildings poses a series of challenges, largely attributable to architectural constraints and conservation requirements. The present study offers an operational campaign of an MVHR system installed during the energy retrofit of a protected residential heritage dwelling in Vitoria-Gasteiz, Spain. Although environmental monitoring was carried out throughout the year, representative spring, autumn and winter days of continuous operation were analysed, as the occupants frequently avoided using the system due to noise perception. This limitation highlights the importance of considering acoustic comfort and user acceptance as critical factors in the long-term viability of MVHR in heritage contexts. The system was assessed under real-life conditions using continuous environmental monitoring, with a focus on indoor air quality (IAQ), thermal efficiency, airflow balance, and pressure losses. Despite the acceptable mean apparent thermal effectiveness (0.74) and total useful efficiency (0.96), the system’s performance was found to be constrained by significant flow imbalance (up to 106%) and elevated pressure drops, which were attributed to the legacy of the duct geometry. The results obtained demonstrate IAQ improved overall, with mean CO2 concentrations below ~650 ppm across the analysed dataset; however, daily means occasionally exceeded 900–1000 ppm during high-occupancy periods and in the absence of spatially distributed demand control. These exceedances are consistent with the measured outdoor baseline (~400–450 ppm) and reflect the need for post-commissioning balancing and room-level sensing to sustain Category II performance in heritage dwellings. This study provides empirical evidence on the limitations and opportunities of MVHR deployment in historic retrofits, thus informing future guidelines for sustainable interventions in heritage contexts.