Frictional motion is intrinsically complex, resulting from the interactions between driving forces, interfacial nonlinearity and instabilities, material inertia, and bulk geometry contacts. In the present paper, a two-dimensional interface friction model with a single micro-bulge is established, and the wave phenomenon at the friction interface is numerically simulated and analyzed by the finite element method. The simulation results show that in the micro-process of loading, there are significant stress fluctuations and fine wave structure characteristics at the frictional interface. A new interesting wave phenomenon occurs when the incident stress wave has not yet propagated to the micro-bulge position, a micro-stress disturbance has been generated from the interface and propagated to the substrate by a longitudinal wave. This wave phenomenon implies that the overall response of the interface precedes the local wave response of the matrix. More comparative simulations and analyses proved that the overall gravity micro-adjustment on the interface might be responsible for such new waves. This study reveals a new wave phenomenson in the early stage of interface friction, which predicts earthquake in advance.
In this paper, the strain rate dependence of hardening behavior of polycrystalline pseudoelastic (PE) and shape memory effect (SME) TiNi alloy under impact loading was investigated by experiments. Measurements of stress–strain curves, hardening modulus, hysteresis loop area, and temperature variation are synchronized using in situ infrared detector system at the strain rate range from 300/s to 2000/s. It is shown that with the strain rate increasing, for PE specimens, strain rate hardening is observed, while SME specimens perform a strong nonlinear strain hardening. The results of synchronous temperature measurement show that in stress-temperature space, for PE samples, the dynamic transformation path is strain rate independent, but for the SME samples, the opposite is true. Thermal-mechanical coupling does not seem to explain this difference, and hardening from microstructure variation should be considered for such difference.