Landslide monitoring and early warning systems are the most successful countermeasures to reduce fatalities and economic losses from landslide hazards. The traditional strategies such as GPS and extensometers are relatively expensive and difficult to be installed in steep, high mountains. In this study, a MEMS (Micro Electro Mechanical Systems) based multivariate wireless monitoring sensor unit was used to build a monitoring and early warning system for rainfall-triggered landslides, as one of the most practical and cost-effective countermeasures for hard-reached mountains. The multi-source wireless monitoring system and its well-developed equipment were tested in a landslide-prone slope to monitor the triggering of landslides and debris flows in the Wenchuan earthquake region, China. The variations of several state variables were observed, including the soil moisture content, soil matric suction, rainfall, inclination and ground vibration. The results of a slope stability analysis were benchmarked with the in situ measurements to identify the multivariate early warning parameters for rainfall-induced landslides. The proposed early warning system for the slope stability analysis can provide a more accurate prediction for rainfall-induced landslides and debris flows in earthquake hit regions.
The material point method (MPM) has been increasingly used to simulate coupled hydro-mechanical problems involving large deformations. However, when addressing saturated porous media with an almost incompressible liquid phase, the classic explicit MPM with low-order interpolation functions is not stable if no further stabilization approach is used. In this study, a solid-velocity–liquid-velocity-based hydro-mechanical governing formulation is adopted to construct a two-phase single-point explicit generalized interpolation material point (GIMP) method. To stabilize this set of formulation, the XPIC(m) (extended PIC of order m) method is extended to erase null space noise and damp high-frequency waves in both solid and liquid phases; additionally, a cell-based averaging approach is adopted to solve locking issues and smooth stress field variables. Several numerical examples have been presented to demonstrate the capabilities of the stabilized coupled GIMP method in simulating coupled hydro-mechanical problems involving dynamic effects and large deformations.