This paper studies the chemical and mechanochemical preparation of glauconite with ammonium dihydrogen phosphate (ADP) nanocomposites with a ratio of 9:1 in the vol.% and wt.%, respectively. The methods include X-ray diffraction analysis, scanning electron microscope with energy-dispersive X-ray spectroscopy, transmission electron microscopy, infrared spectroscopy, and differential thermal analysis with a quadruple mass spectrometer. The manufactured nanocomposites keep the flaky glauconite structure. Some glauconite unit structures have been thickened due to minimal nitrogen (ammonium) intercalation into the interlayer space. The globular, granular, or pellet mineral particles of nanocomposites can be preserved via chemical techniques. Globular and micro-aggregate particles in nanocomposites comprise a thin film of adsorbed ADP. The two-step mechanochemical method makes it possible to slightly increase the proportion of adsorbed (up to 3.2%) and intercalated (up to 6.0%) nutrients versus chemical ways. Nanocomposites prepared via chemical methods consist of glauconite (90%), adsorbed (1.8–3.6%), and intercalated (3.0–3.7%) substances of ADP. Through the use of a potassium-containing clay mineral as an inhibitor, nitrogen, phosphorus, and potassium (NPK), nanocomposite fertilisers of controlled action were obtained. Targeted and controlled release of nutrients such as phosphate, ammonium, and potassium are expected due to various forms of nutrients on the surface, in the micropores, and in the interlayer space of glauconite. This is confirmed via the stepwise dynamics of the release of ammonium, nitrate, potassium, and phosphate from their created nanocomposites. These features of nanocomposites contribute to the stimulation of plant growth and development when fertilisers are applied to the soil.

This study reports on the development of nanocomposites utilizing a mineral inhibitor and a micronutrient filler. The objective was to produce a slow release fertilizer, with zinc sulfate as the filler and halloysite nanotubes as the inhibitor. The study seeks to chemically activate the intercalation of zinc into the macro-, meso-, and micropores of the halloysite nanotubes to enhance their performance. As a result, we obtained three nanocomposites in zinc sulfate solution with concentrations of 2%, 20%, and 40%, respectively, which we named Hly-7Å-Zn2, Hly-7Å-Zn20, and Hly-7Å-Zn40. We investigated the encapsulation of zinc sulfate in halloysite nanotubes using X-ray diffraction analysis, transmission electron spectroscopy, infrared spectroscopy (FTIR), and scanning electron microscopy with an energy-dispersive spectrometer. No significant changes were observed in the initial mineral parameters when exposed to a zinc solution with a concentration of 2 mol%. It was proven that zinc was weakly intercalated in the micropore space of the halloysite through the increase in its interlayer distance from 7.2 to 7.4. With an increase in the concentration of the reacted solution, the average diameter of the nanotubes increased from 96 nm to 129 nm, indicating that the macropore space of the nanotubes, also known as the “site”, was filled. The activated nanocomposites exhibit a maximum fixed content of adsorbed zinc on the nanotube surface of 1.4 wt%. The TEM images reveal an opaque appearance in the middle section of the nanotubes. S SEM images revealed strong adhesion of halloysite nanotubes to plant tissues. This property guarantees prolonged retention of the fertilizer on the plant surface and its resistance to leaching through irrigation or rainwater. Surface spraying of halloysite nanotubes offers accurate delivery of zinc to plants and prevents soil and groundwater contamination, rendering this fertilizer ecologically sound. The suggested approach of activating halloysite with a zinc solution appears to be a possible route forward, with potential for the production of tailored fertilizers in the days ahead.

This article presents the results of a study of glauconite obtained from phosphate rock waste. The aim is to study the morphological, structural and chemical characteristics of glauconite and to determine the potential for secondary use of mining waste in the agricultural sector. The electromagnetic separation method was used to obtain glauconite concentrate. The optimum parameters for obtaining the maximum mineral content in the concentrate were determined. Studies have shown that glauconite is characterised by globular, granular grains of the highly mature variety. Glauconite almost invariably contains inclusions of pyrite and apatite, which significantly improve the characteristics of the fertiliser. Laboratory experiments have shown that glauconite waste and glauconite concentrate have a positive effect on plant growth and development. The high potassium content, the favourable globular shape of the grains, and the presence of apatite and pyrite inclusions indicate the potential use of glauconite from mining waste as a potash fertiliser. Application of glauconite fertiliser to the soil will provide an opportunity to improve its texture, providing better moisture and aeration. The use of glauconite fertiliser is particularly valuable on acidic soils where apatite can be dissolved, making phosphorus available to plants. This nutrient additionally favours plant growth, as well as reducing the risk of heavy metal accumulation in the soil. Thus, glauconite from the waste of the Egorievsk deposit represents a promising fertiliser for improving soil quality and increasing crop yields.

The full potential of glauconite-based nanocomposites as micronutrient fertilizers remains underexplored, particularly their interaction with Zn, Cu, and B. Despite the promising applications, the mechanisms of nutrient sorption and their effects on plant growth require further investigation, especially concerning structural changes and nutrient delivery efficiency. This study investigates the modification of glauconite with Zn, Cu, and B solutions to create multifunctional nanocomposites with enhanced properties. It was established that the activation process preserves the primary globular–lamellar morphology of glauconite while introducing structural changes. Nanocomposites were synthesized using chemical activation and characterized using XRD, SEM-EDS, TEM, FTIR, and BET analyses. Agrochemical tests evaluated their effects on oat growth under controlled conditions. Nanocomposites with zinc sulfate exhibited an increase in specific surface area and mesoporosity, enhancing sorption capacity and facilitating the formation of inner-sphere complexes on the mineral’s basal surface. Modification with copper led to the formation of secondary phases, such as sulfates, on the surfaces of microflakes and globules while preserving the crystalline structure with inner-sphere coordination of Cu²⁺. Boron-modified nanocomposites were characterized by localized restructuring, pore channeling, and an increase in mesopore diameter, along with the formation of outer-sphere complexes relative to the basal surface of glauconite. Thermogravimetric and calorimetric analyses with mass spectrometry revealed specific endothermic and exothermic effects, particularly in Zn-modified samples, confirming changes in dehydration energetics. Agricultural tests on oats (Avena sativa) demonstrated the effectiveness of Cu- and B-modified nanocomposites in improving plant growth parameters, including a 7% increase in plant height and a 6.4% increase in dry weight. Zn-modified nanocomposites showed high germination rates (up to 100%) at low dosages but require optimization to avoid phytotoxicity at higher concentrations. The findings highlight the potential of adapting nanocomposites for targeted nutrient release. Additionally, glauconite nanocomposites have potential applications in restoring degraded soils, treating polluted runoff, and developing slow-release agrochemical systems.