Zhou Bukui

Zhou Bukui


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 October 2023 in Materials
Verified
Journal Article
Open access
PDF file
ZWZhang wei
Zhang wei
JMJize Mao
Jize Mao
XYXiao Yu
Xiao Yu
ZBZhou Bukui
Zhou Bukui
WLWang limei
Wang limei
To confirm the effect of confining pressure on the dynamic mechanical behavior of ultrahigh-performance concrete (UHPC), this study used a true triaxial split Hopkinson pressure bar test system to perform dynamic compression tests on UHPC under triaxial constraints. The confining pressure range considered was 5~10 MPa, the strain rate range was 35~80 s−1, and the steel fiber contents were 0.5%, 1% and 2%. The three-dimensional dynamic engineering stress-strain relationship and equivalent stress-strain relationship of UHPC under different confining pressures and different strain rates were obtained and analyzed in detail. The results show that under the confinement condition, the dynamic peak axial stress–strain and dynamic peak lateral stress–strain of UHPC have strong sensitivity to the strain rate. In addition, the dynamic peak lateral stress–strain is more sensitive to the confining pressure than the dynamic axial stress. An empirical strength enhancement factor (DIFc) that considers the strain rate effect and confining pressure was derived, and the impact of the coupling between the enhancement caused by the confining pressure and the strain rate effect on the dynamic strength of the UHPC under triaxial confinement was discussed. A dynamic strength failure criterion for UHPC under triaxial constraint conditions was established.

21 September 2023 in Materials
Verified
Journal Article
Open access
PDF file
SLSheng Liu
Sheng Liu
XXXiangyun Xu
Xiangyun Xu
ZBZhou Bukui
Zhou Bukui
KYKezhi Yang
Kezhi Yang
The susceptibility of reinforced concrete (RC) slabs to punching shear failure is heightened when subjected to close-in explosion loads, leading to a wider range of damage caused by the resultant leakage shock wave through the punching hole. Consequently, it is crucial to analyze the conditions for punching shear failure and the size of the punching hole in RC slabs. This study investigates the punching shear failure of RC slabs under close-in explosions through numerical simulation and theoretical analysis. Initially, a finite element model is developed to examine the distribution of the explosion load on the slab’s surface. Subsequently, the critical explosion load for punching shear failure is determined using a damage criterion specific to RC slabs. Additionally, a calculation model based on the twin shear stress yield criterion is established to predict the punching hole’s radius. To validate the accuracy of this method, a comparison is conducted with existing test results.

28 October 2024 in Scientific Reports
Verified
Journal Article
Open access
WZWei Zhang
Wei Zhang
JMJize Mao
Jize Mao
ZBZhou Bukui
Zhou Bukui
XYXiao Yuxiao10@foxmail.com
Xiao Yuxiao10@foxmail.com
FHFeng Hu
Feng Hu
CMChaomin Mu
Chaomin Mu
Ultra-high performance concrete (UHPC) is becoming a prevailing construction material in protective engineering. However, an insufficient research basis causes difficulty in the anti-explosion structural design of UHPC. To investigate the blast resistance of the UHPC slab (UHPCS), contact explosion tests were carried out. UHPCS exhibited superior blast resistance and a lower threshold range of failure modes than the normal reinforced concrete slab (NRCS). Compared with the NRCS, the UHPCS reached a lower damage level under the same scaled distance and had smaller craters and spalls, fewer cracks, and an absence of cross-shaped cracks. For NRCS, failure modes of medium spall, severe spall, and perforation were reached under charges of 1.0, 1.6, and 2.2 kg. In contrast, UHPCS reached medium spall, severe spall, and perforation under charges of 1.6, 3.3, and 5.0 kg. The scaled slab thicknesses (T/W1/3) of the medium spall, severe spall, and perforation of the NRCSs were 1.17, 1.27, and 1.32 times larger than those of the UHPCSs, respectively. The formulae for predicting the spall and perforation thresholds of the UHPCSs were proposed. The reduction factors were used to evaluate the mitigation effect of the blast damage on the UHPC compared to that on the NRC. The reduction factors of the crater diameter (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} $${\gamma _\Phi }_{C}$$) and the spall diameter (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} $${\gamma _{\Phi s}}$$) were determined to be 0.507 and 0.721, respectively. For quantitative analysis of the anti-explosion performance of UHPC, a simple estimation method for predicting the dimensions of the crater and spall of the UHPCS was proposed and verified based on the dimensional analysis method.