This Letter unveils a novel observation of condensation shock in a thermoacoustic prime mover with a wet stack, powered by a consistent 70 W heat input and maintained at atmospheric pressure. Intermittent pressure bursts, triggered by distinct acoustic cycles, reveal new characteristics of non-combustion-driven thermoacoustic instabilities, expanding the horizon beyond the energy conversion applications of traditional heat engines. Our findings, highlighted by pressure bursts reaching up to 35.8 kPa and detailed through time–frequency analysis, not only emphasize the critical role of phase-change dynamics but also pave the way for potential applications in heat transfer and material separation.
A stacked-screen regenerator is a key component in a thermoacoustic Stirling engine. Therefore, the choice of suitable mesh screens is important in the engine design. To verify the applicability of four empirical equations used in the field of thermoacoustic engines and Stirling engines, this report describes the measurements of heat flow rates transmitted through the stacked screen regenerator inserted in an experimental setup filled with pressurized Argon gas having mean pressure of 0.45 MPa. Results show that the empirical equations reproduce the measured heat flow rates to a mutually similar degree, although their derivation processes differ. Additionally, results suggest that two effective pore radii would be necessary to account for the viscous and thermal behaviors of the gas oscillating in the stacked-screen regenerators.