Anatolii Cherniavskyi

Dr. Anatolii Cherniavskyi

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2024 in Energies
Verified
Journal Article
Open access
PDF file
Yuliia ShyshkoYuliia Shyshko
Yuliia Shyshko
Anatolii CherniavskyiAnatolii Cherniavskyi
Anatolii Cherniavskyi
DSDaria Shyshko
Daria Shyshko
OBOlena Borychenko
Olena Borychenko
Artur ZaporozhetsArtur Zaporozhets
Artur Zaporozhets
Ievgen ZaitsevIevgen Zaitsev
Ievgen Zaitsev
The article examines a method of loading biomass waste into a boiler unit, which ensures the gas tightness of the boiler’s working chamber by forming a “plug” of biomass as it moves through the cylindrical channel of the screw feeder. Local biomass wastes (sunflower husks, coniferous wood sawdust, and walnut shells) were selected for the study, a distinctive feature of which is that they did not undergo any prior processing before use (drying, fractionation, grinding, etc.). The properties of biomass as a bulk material (angle of internal friction) were determined experimentally. According to the results, sawdust from coniferous wood has an average angle of internal friction that is 1.48 times bigger than that of sunflower husks and 1.29 times bigger than walnut shells, while the average loading mass of sawdust is 2.2 times less than that of sunflower husks and 2.6 times less than that of walnut shells. This low bulk density and high angle of internal friction for sawdust suggest the likelihood of spontaneous compaction and layer suspension. Experimental studies were also conducted on the compaction force of the biomass layer. It was found that neither coniferous wood sawdust nor walnut shells can be used in the proposed feeder because the sawdust forms a dense layer that does not disperse under any compaction, and the walnut shells do not form a “plug” in the studied pressure range. Therefore, only sunflower husks were used for further studies. The empirical dependence of the density of the sunflower husk layer on the compaction pressure was obtained from the results. It was determined that to ensure a suction level through a screw feeder with a diameter of 0.1 ÷ 0.25 m into the furnace of the boiler unit of no more than 0.1 m3/h with a pressure difference between the boiler furnace and the surrounding environment ΔP = 0.05 ÷ 0.3 kPa, the relative increase in the density of the “plug” from sunflower husks should not exceed the bulk density of the uncompacted layer by more than 11.5%. Experimentally, it was determined that the geometric dimensions of the “plug” from sunflower husk, which ensure the necessary level of gas tightness of the feeder, depend only on the diameter of the channel and are 1.136·d. Calculations were made to obtain the dependencies of the compaction force of the biomass waste layer on the level of suction (in the studied range Q = 0.01 ÷ 0.1 m3/h) into the furnace of the boiler unit under controlled pressure drops (in the studied range ΔP = 0.05 ÷ 0.3 kPa) between the boiler furnace and the surrounding environment for feeders with different screw diameters (d = 0.1 ÷ 0.25 m), which can be used for the practical determination of the geometric and operational parameters of the screw feeder when operating a boiler unit on sunflower husks.

14 July 2022 in POWER ENGINEERING: economics, technique, ecology
Verified
Journal Article
Open access
PDF file
VNV. Nakhodov
V. Nakhodov
OBO. Borychenko
O. Borychenko
Anatolii CherniavskyiAnatolii Cherniavskyi
Anatolii Cherniavskyi
The metallurgical industry of Ukraine in wartime faced significant difficulties in its functioning. However, at the moment there is a gradual recovery of the industry. It should be noted that steel production is an extremely energy-intensive process, accounting for the second largest share of energy consumption and the largest share of CO2 emissions. Therefore, in order to control the growth of energy consumption and CO2 emissions in this industry, as well as to be competitive in the international market, Ukrainian metallurgical enterprises should not only expect maximum assistance from the government bodies and international partners in matters of logistics and sales markets, but also focus on energy efficiency issues and decarbonization of their production. While improving the energy efficiency of steel production through the introduction of standard energy efficiency measures will help the industry, there is a need to further develop and deploy a wide portfolio of breakthrough solutions to improve processes and infrastructure. This will achieve long-term deep reductions in CO2 emissions. For this activity to be purposeful rather than chaotic, individual enterprises and the industry must develop a strategy to increase energy efficiency and decarbonize their production. This article is devoted to one of the possible approaches to solving this issue. Along with a description of the mathematical model for the formation of an optimal strategy for improving energy efficiency and decarbonization of metallurgical industries, the article presents the structure of energy costs, as well as the list of significant energy usages at metallurgical enterprises. In addition, a separate place in the article is given to the issue of building an energy baseline, taking into account the provisions of modern international standards in the field of energy management system (ISO 50001, ISO 50006, ISO 50047), as well as the main factors affecting energy consumption. The paper also presents the list of typical measures for improving the energy efficiency of metallurgical enterprises for each group of significant energy usages.

6 April 2020 in POWER ENGINEERING: economics, technique, ecology
Verified
Journal Article
Open access
PDF file
VNV. Nakhodov
V. Nakhodov
OBO. Borychenko
O. Borychenko
Anatolii CherniavskyiAnatolii Cherniavskyi
Anatolii Cherniavskyi
Statistics show that energy is one of the highest operating costs in a manufacturing enterprise. So, improving energy efficiency can lead to a significant increase in profits and reduce the impact of the enterprise on the environment. To increase the performance of energy efficiency activities, it is necessary to implement an energy management system. One of the components of this system is energy monitoring, which, in turn, is based on the periodic collection and analysis of data to assess the state of the monitoring objects in terms of energy efficiency. In this paper, the role and place of energy monitoring in the energy management system of an industrial enterprise are noted. The paper proposes the concept of creating energy monitoring system in industrial companies, which is based on the combination of a monitoring system based on specific energy consumption, and usage of group energy characteristics of production facilities. Implementing such energy monitoring systems will allow to conduct operational control of energy efficiency of production facilities by creating individual systems for monitoring energy efficiency, as well as successfully carry out such monitoring at the enterprise and its subdivisions over longer periods of time using specific energy consumption indicators. It also provides general guidelines for conducting energy monitoring. These guidelines were formed based on the results of studying various methods and scientific publications in the field of energy monitoring, as well as on the basis of practical experience in the development and implementation of energy management systems. Particular attention is paid to the issues of processing and analysis of information about the objects of energy monitoring of industrial enterprises. The practical application of the concept of creating energy monitoring systems envisages gradual improvement of the existing monitoring system based on the specific energy consumption, which will be further completely replaced with individual energy efficiency monitoring systems.

19 May 2025 in POWER ENGINEERING: economics, technique, ecology
Verified
Journal Article
Open access
PDF file
AHAndrii Hoienko
Andrii Hoienko
Anatolii CherniavskyiAnatolii Cherniavskyi
Anatolii Cherniavskyi
The article addresses the development of an energy monitoring system for dairy industry enterprises, which is particularly relevant in the context of improving production energy efficiency and reducing fuel and energy resource consumption. The structure of energy consumption at dairy plants is analyzed, and the main types of energy resources are identified: electricity, steam, natural gas, and water. A conceptual model of energy monitoring has been developed, which provides a multi-level data collection system from key consumption sources and structural units of the enterprise. The integration of automated metering devices is proposed to measure energy consumption parameters with a high frequency of data reading, followed by aggregation into 15-minute intervals. The system also takes into account external factors influencing the dynamics of energy use, including climatic conditions and production volume. The proposed typical energy monitoring scheme enables the formation of the enterprise’s energy balance, tracking of indicator changes over time, timely detection of inefficient resource use, and provides a foundation for informed managerial decision-making. The implementation of such a system will contribute to increased energy efficiency and to the economic and environmental sustainability of dairy industry enterprises. Future research prospects include the integration of artificial intelligence into energy consumption analysis and management processes.

12 October 2026 in POWER ENGINEERING: economics, technique, ecology
Verified
Journal Article
Open access
PDF file
AHAndrii Hoienko
Andrii Hoienko
Anatolii CherniavskyiAnatolii Cherniavskyi
Anatolii Cherniavskyi
The study aims to develop a digital twin structure and a method for forming input data for short-term electrical load forecasting at a dairy plant, taking into account its current and expected technological states. The plant boundary is defined by the main electricity metering point, and the target variable is the mean active power over a 15-minute interval. Historical load, equipment and process states, product and buffer parameters, refrigeration conditions, the production plan, and calendar and weather variables are synchronized according to the time at which they become available. The digital twin converts measurements and planning records into a formalized technological context for the forecasting model. A functional structure linking primary data sources, the digital twin core, the forecasting module, decision support, and subsequent state updating is proposed. The composition of the current state, the expected state at the forecast horizon, and the complete model input vector is formalized. A rule is established according to which each forecasting sample contains only measurements, plans, and external forecasts available when the load forecast is issued. An illustrative one-hour-ahead example separates binary operation indicators, quantitative process variables, and refrigeration variables before combining them in the model input vector. The example demonstrates input formation only; a numerical load forecast requires a model trained on operating-plant data. The proposed structure provides a methodological basis for day-ahead and intraday load-profile forecasting, early detection of possible power-limit violations, coordination of flexible operations, and planning under restricted grid supply or on-site generation. Forecast accuracy and the practical effect of state-aware forecasting must be evaluated on a chronologically separated dataset from an operating dairy plant.

31 October 2025 in POWER ENGINEERING: economics, technique, ecology
Verified
Journal Article
Open access
PDF file
Anatolii CherniavskyiAnatolii Cherniavskyi
Anatolii Cherniavskyi
OBOlena Borichenko
Olena Borichenko
VNVolodymyr Nakhodov
Volodymyr Nakhodov
KCKyrylo Cherniavskyi
Kyrylo Cherniavskyi
АЧАнатолій Чернявський
Анатолій Чернявський
КЧКирило Чернявський
Кирило Чернявський
The article explores the application of hybrid learning formats for developing soft skills among energy managers and energy auditors. It highlights the growing importance of non-technical competencies - such as communication, leadership, teamwork, and strategic thinking - in ensuring the successful implementation of energy efficiency projects. The research emphasizes that the integration of hybrid learning, combining online and offline modalities, offers a flexible and effective framework for enhancing both technical knowledge and behavioral competencies required in modern energy management. The study provides a conceptual analysis of hybrid formats, identifies their key components (theoretical, practical, and integrative modules), and presents methodological approaches that facilitate soft skills formation through case studies, project-based activities, role-playing, and mentoring. The paper also outlines potential challenges and risks of hybrid learning, including unequal access to digital resources and difficulties in synchronizing online and offline components. To address these issues, a comprehensive support system is proposed, encompassing the roles of teachers as facilitators, mentors as practice-oriented guides, and digital platforms as tools for continuous engagement and feedback. The findings confirm the suitability of hybrid learning for professional education in the energy sector, particularly within qualification upgrade and lifelong learning programs. The article concludes that a balanced hybrid approach not only fosters the acquisition of technical expertise but also ensures the systematic development of soft skills crucial for leadership, negotiation, and decision-making in energy efficiency management. Future research should focus on empirical validation of the proposed model through case studies and quantitative assessments of soft skills progress in hybrid educational environments.