The performance of asphalt binders and asphalt mixtures can be enhanced by the inclusion of fiber. The viscoelastic characteristics of fiber-reinforced asphalt binders and their corresponding mixtures were characterized in this study. To generate fiber-reinforced asphalt samples for dynamic shear rheometer (DSR) tests, polypropylene fibers (PPFs), polyester fibers (PFs), and lignin fibers (LFs) were added into modified asphalt with a ratio of 5wt%. Indirect tensile resilience tests were conducted on the fiber-reinforced asphalt mixture with Marshall samples, which was prepared with a 6.4% of bitumen/aggregate ratio. The addition of fiber can increase the anti-rutting performance of asphalt binders, and also reduce the anti-fatigue performance of asphalt binders to varying degrees. Viscoelastic properties of the fiber-reinforced asphalt binders are highly dependent on the shape of the used fiber. The resistance of the fiber-reinforced asphalt binders to rutting at high temperatures increases with the roughness degree of the fiber’s surface morphology. PPF-reinforced asphalt binders surpass the others in terms of anti-rutting capabilities. The high-temperature deformation resistance of the PPF-reinforced asphalt mixture is stronger, whereas the low-temperature crack resistance of the PF-reinforced asphalt mixture is stronger, which can be observed from the master curve of indirect tensile resilient modulus.

Fiber can absorb asphalt binder and therefore reinforce and stabilize the asphalt mixture structure and also prevent the asphalt from the leaking, which occurs in the process of mixing and transport. In this study, three kinds of fiber (polyester fiber, polypropylene fiber, and lignin fiber) are used to evaluate the relationship between the fiber types and mechanic performance of SMA-13 fiber asphalt mixture, which is specially designed for field tests of high-speed vehicles on pavements. The micro-surface characteristics of fiber and aggregates were studied by SEM and image analysis. Marshall stability and splitting strength were used to measure the properties of the asphalt mixture. In addition, a field test, including measures for curve-section edge, curve-section center, straight-section edge, and straight-section center, was conducted to evaluate the skid resistance of the high-speed vehicles that test field pavement. The results show that the Marshall stabilities of asphalt mixture with three kinds of fibers have been improved, whereas the stability of asphalt mixture prepared by polypropylene fiber and polyester fiber particularly increased before immersion. Among the three kinds of fiber asphalt mixtures, the polyester fiber asphalt mixture has enhanced water susceptibility. Skid resistance in the field test indicated that high skid resistance and good surface-texture depth were achieved.

The properties of prepared foamed lightweight soils (FLSs) using prefabricated foam requires high foam stability. This paper investigates the geometrical characteristics of different foam densities, different types of foaming agents in the air, and the presence of slurry. Then, it studies their effects on the pore structure and mechanical properties of FLS. Results show that with the increase in foam density the bleeding rate of foam in the air for 1 h increases and the foam with a foam density of 50 kg/m³ is the most stable in the air. The stability of foam in slurry is not directly related to the property of foam in the air. The FLS prepared with the same foaming agent had the best performance with the FLS designed with a foam density of 50 kg/m³, which had the smallest average pore size and the most minor pore size distribution, and had the highest compressive strength. Among the three different foaming agents, Type-S was the best, and the slurry had the lowest rate of increase in wet density after the defoaming test, indicating that the foam had the best stability in the cement slurry. The FLS prepared with the density of 50 kg/m³ using the Type-S foaming agent and mixed with the slurry of cement, fly ash:slag:water = 105:105:140:227.5, was hardened to a mean pore size of 299 μm, and the 7 days, 28 days, and 56 days compressive strengths were 0.92 MPa, 2.04 MPa, and 2.48 MPa, respectively, which had the smallest average pore size and the highest compressive strength among the FLSs prepared using the three foaming agents.

This study analyzed the viscoelastic properties of asphalt binders reinforced with various fibers, such as modified asphalt binder, modified asphalt binder reinforced with lignin fibers (LFs), polyester fibers (PFs), and polypropylene fibers (PPFs), using dynamic shear rheological (DSR) testing. Then, the experiment generated data on the dynamic modulus and phase angle, which described the dynamic rheological characteristics at varying temperatures. The generalized Maxwell model was employed to select the appropriate element, and the test curve was fitted into a discrete time spectrum based on the time–temperature equivalence principle (TTSP). The master curves of the relaxation modulus and creep compliance were established to predict the relaxation and creep properties of various asphalt binders. The analysis indicated that fiber-reinforced binders offer superior resistance to high temperatures and long-term deformation, while being less sensitive to temperature and having a more significant elastic characterization. The binders reinforced with PPFs and LFs exhibited superior performance in high-temperature settings and long-term durability, respectively. On the other hand, the binder reinforced with PFs displayed exceptional high-temperature elastic properties. Additionally, based on the experimental data and corresponding discussion, it appears that the 13-element GM model is more appropriate for fitting the data.

Accurate and objective evaluation of existing bridges is critical for ensuring the bridge’s safety and optimizing maintenance strategies. This study proposes an integrated Fuzzy Best and Worst Method and fuzzy comprehensive evaluation (FBWM-FCE) model to evaluate uncertainties in expert judgments and complex decision-making. A four-layer evaluation indicator system and five distinct grades for bridges were established, aligned with the JTG 5120-2004 and JTG/T H21-2011 standards. The FBWM innovatively employs triangular fuzzy numbers (TFNs) to reduce linguistic uncertainties and cognitive bias in bridge evaluation. Subsequently, by integrating FCE for multi-level fuzzy comprehensive operations, the method translates qualitative evaluations into quantitative evaluations using membership matrices and weights. A case study of Ding Jia Bridge and Jigongling Bridge validated the FBWM-FCE model, revealing Class III Bridge (fail condition), consistent with on-site inspections in the 2020 Bridge Inspection and Evaluation Report (Highway Administration of Hubei Provincial Department of Transportation). Comparative analysis demonstrated FBWM’s operational efficiency, requiring 20% fewer pairwise comparisons than AHP while maintaining higher consistency than BWM. The model’s reliability stems from its systematic handling of epistemic uncertainties, offering a high reduction in procedural complexity compared to standardized methods. These advancements provide a scientifically rigorous yet practical tool for bridge management, balancing computational efficiency with evaluation accuracy to support maintenance decisions.

Foamed lightweight soil (FLS) is a lightweight cementitious material containing a large number of tiny closed pores and has been widely used as a filler in places such as railways, roads and airports. However, there has been little research into the resistance of FLS to sulphate attack in practical engineering applications. The performance of FLS against different sulphate erosion concentrations was studied to elucidate the engineering characteristics of using large volumes of FLS as fill material for the road base in the construction of intelligent networked vehicle test sites. The results showed that the compressive strength of FLS prepared using 30% Portland cement (C), 30% granulated blast furnace slag (GBFS), 40% fly ash (FA) and a small amount of a concrete antiseptic agent (CA) as cementitious materials reached 0.8 and 1.9 MPa at 7 and 28 d, respectively, when the wet density was about 600 kg/m³, which met the design requirements. The FLS prepared via the above-mentioned cementitious system had a low carbon emission, with a CO₂ emission reduction rate of up to 70%. It also had excellent sulphate attack resistance: the corrosion resistance coefficient of the cementitious material system reached 0.97, which was considerably better than that of C (0.83). For an erosion medium environment with SO₄²⁻ concentrations of less than 1000 mg/L (moderate), 40% GBFS or FA can be used to prepare FLS. When the concentration of SO₄²⁻ is less than 4000 mg/L (severe), 30% C, 30% GBFS and 40% FA can be used as cementitious materials, preferably in combination with an appropriate amount of CA, to prepare FLS.