The development of FeCrAl alloys has commenced for use as nuclear fuel cladding material, intended to serve as an enhanced accident-tolerant alternative to Zr-based alloys. In this study, the Fe-13Cr-4Al alloy, specifically designed for advanced accident-tolerant fuel (ATF) cladding, was carefully prepared through vacuum induction melting and hot-working processes. Mechanical properties and serrated flow behavior of this alloy were investigated through tensile tests at temperatures ranging from 200 to 800 °C. Intriguingly, serrations emerged within a specific temperature range, accompanied by unique mechanical behavior characteristics indicative of dynamic strain aging (DSA). Additionally, the alloy’s fracture modes showed a transition from a mix of ductile and cleavage fracture features to fully ductile fracture as the temperature increased. This study offers insights into the mechanical properties and serration behaviors of FeCrAl alloys, highlighting their potential for use in nuclear fuel cladding.

In this paper, the large deflection of the foam-filled triangular tube (FFTT) is studied analytically and numerically under transverse loading. Considering the strengths of the foam and the tube, the yield criterion of FFTT is established. Based on the yield criterion, a theoretical model for the large deflection of the clamped triangular tube filled with foam under transverse loading is developed. The numerical simulations are carried out using ABAQUS/Standard software, and the analytical results are compared with the numerical ones. The effects of foam strength, thickness of the tube, and the width of the punch on the load-bearing capacity and energy absorption of the clamped FFTT loaded transversally are discussed in detail. It is demonstrated that the load-bearing ability and the energy absorption increase with increasing foam strength, tube thickness, and punch width. The closer the loading position is to the clamped end, the greater the increases in the capacity of load bearing and the energy absorption of the triangular tube filled with foam. The theoretical model can be used to foresee the large deflection of metal FFTT under transverse loading.

14-GHz electron cyclotron resonance ion source at the Heavy Ion Research Facility National Laboratory in Lanzhou has been used to investigate x-rays from the interaction of slow highly charged Ar17+and Ar16+ions for different energies with Be, Al, Ni, Mo and Au surfaces. Interaction of Ar17+ and Ar16+ ions with Metallic Surfaces for a wide range of energies has been studied by measuring the resulting x-ray emission. The characteristic features of the x-ray spectra have been explained.