An ultra-wideband polarization-insensitive frequency selective surface (FSS) absorber is proposed for S to K-band applications. The absorber comprises two compensation slabs, a lossy FSS layer and a grounded dielectric plate. The FSS unit cell is a combination of a second-order Chinese knot and a cross. To enhance the bandwidth and angular stability of the single-layer FSS absorber, a compensation layer composed of FR4 and polymethyl methacrylate (PMMA) slabs is incorporated. The proposed FSS absorber demonstrates a remarkable absorption rate of over 90% within the frequency range of 3.1–22.1 GHz, exhibiting a fractional bandwidth of 150.8%. Even when subjected to an oblique incidence of 45°, the absorber maintains an 80% absorption rate in the frequency range of 4.4–19.1 GHz for both TE and TM polarizations. The total thickness of the FSS absorber is 0.0848 λ_L (the wavelength at the lowest cutoff frequency), and only 1.08 times the Rozanov limit. To validate the design, a prototype of the proposed absorber was fabricated and measured. Good agreements were observed between the simulations and measurements.

The size of current microwave-driven UV lamps limits their direct application in dental light curing. This article proposes a coaxial structure to miniaturize the UV lamp. First, the Drude model and the finite difference time domain algorithm were used to analyze the multi-physical field coupling and the complex field distribution within the lamp. Second, the dimensional parameters of the lamp were optimized, which enabled the lamp to be miniaturized and operate with high performance. Third, to analyze the sensitivity of the lamp, the effects of input power, gas pressure, and gas composition on its performance were investigated. It was found that an input power of 6 watts was enough to light the bulb with over 90% energy utilization. Finally, to verify the feasibility, an experimental system was set up. The lamp was successfully lit in the experiment, and its spectral output was tested. The results show that the microwave-driven UV lamp based on a coaxial structure is miniaturized and broad-spectrum, making it suitable for clinical dental light curing.