This investigation studied the effect of reduction sequence during rolling of ferritic stainless steel on texture and anisotropy. A series of thermomechanical processes were performed on the present samples utilizing rolling deformation, with a total height reduction of 83% but with different reduction sequences, 67% + 50% (route A) and 50% + 67% (route B). Microstructural analysis showed that no significant difference was found in terms of the grain morphology between route A and route B. In terms of the texture, as compared to route A, route B developed a sharper texture on all components along the γ-fiber and a considerably higher fraction of boundaries that displayed misorientations with respect to the surrounding deformed grains. In consequence, optimal deep drawing properties were achieved, where rm was maximized and Δr was minimized. Moreover, despite the similar morphology between the two processes, the resistance toward ridging was improved in the case of route B. This was explained in relation to the selective growth-controlled recrystallization, which favors the formation of microstructure with homogeneous distribution of the //ND orientation.
This study presents an innovative methodology that integrates experimental investigations with finite element simulations to ascertain the validity and reliability of Al 3104 sheet metals during cold deep drawing. Focusing on the nose plunger radius and coefficient of friction at a fixed speed and temperature (25 °C), five different scenarios are utilized to simulate the optimum parameters. Through a detailed strain history analysis from simulations, the initiation of bending in the corner is precisely identified, with a validation achieved through a strain analysis obtained via digital image correlation. The study delves into the influence of strain and strain rate on the microstructures and mechanical properties near the corner region. It highlights the superior efficacy of strain-based criteria in characterizing deformation behavior. Notably, the strain distributions during the onset of bending and severe bending align remarkably well with the established simulation data. In brief, this work introduces an integrated approach that harmoniously combines computational simulations with empirical observations, resulting in significant ramifications for precisely comprehending and forecasting the strain distribution in metal forming operations.
Metal injection molding (MIM) is a representative near-net-shape manufacturing process that fabricates advanced geometrical components for automobile and device industries. As the mechanical performance of an MIM product is affected by green-part characteristics, this work investigated the green part of pure copper processed with MIM using the injection temperature of ~180 °C and injection pressure of ~5 MPa. A computational analysis based on the Moldflow program was proposed to simulate the effectivity of the process by evaluating the confidence of fill, quality prediction, and pressure drop of three distinctive regions in the green part. The results showed that the ring and edge regions of the green parts showed localized behavior, which was related to processing parameters including the position of the gate. A microstructural observation using scanning electron microscopy and a 3D X-ray revealed that both the surface and body matrix consisted of pores with some agglomeration of micro-pores on the edges and ring part, while any critical defects, such as a crack, were not found. A microhardness analysis showed that the three regions exhibited a reasonable uniformity with a slight difference in one specific part mainly due to the localized pore agglomeration. The simulation results showed a good agreement with the microstructures and microhardness data. Thus, the present results are useful for providing guidelines for the sound condition of MIM-treated pure copper with a complex shape.
13 August 2025 in International Journal of Control, Automation, and Systems
Near-net-shaped metal products manufactured by high-pressure diecasting (HPD) encountered more or less critical failure during operation, owing to the development of micro-defects and structural inhomogeneity attributed to the complexity of geometrical die design. Because the associated work primarily relies on technical experience, it is necessary to perform the structural analysis of the HPDed component in comparison with simulation-based findings that forecast flow behavior, hence reducing trial and error for optimization. This study validated the fluidity and solidification behaviors of a commercial-grade Al-Si-Cu-Mg alloy (ALDC12) that is widely used in electric vehicle housing parts using the ProCAST tool. Both experimental and simulation results exhibited that defects at the interface of a compact mold filling were barely detected. However, internal micro-pores were seen in the bolt region, resulting in a 17.27% drop in micro-hardness compared to other parts, for which the average values from distinguished observation areas were 111.24 HV, 92.03 HV, and 103.87 HV. The simulation aligns with structural observations on defect formation due to insufficient fluidity in local geometry. However, it may underestimate the cooling rate under isothermal conditions. Thus, the simulation used in this work provides reliable predictions for optimizing HPD processing of the present alloy.