FEI MENG

Dr. FEI MENG

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 December 2023 in Sensors
Verified
Journal Article
Open access
PDF file
SQShi-fan Qiao
Shi-fan Qiao
YLYiqi Liu
Yiqi Liu
CFChaobo Feng
Chaobo Feng
CZCai ziyong Cai ziyong
Cai ziyong Cai ziyong
DCDaolong Chen
Daolong Chen
PXPing Xu
Ping Xu
Water gushing is a common engineering geological disaster in the process of foundation pit construction. Its successful judgment directly affects the safety of engineering construction. Taking the case of water gushing at the bottom of the foundation pitas as a research object, the mechanism and treatment of water gushing in foundation pits, the stability against water gushing, and its influencing factors are analyzed with a field investigation, field testing, and theoretical calculation. The calculation formula for the safety factor and critical thickness of the foundation pit against surges, considering the influence of multiple factors, is deduced. The influence of the height of the confined water level, the thickness of the water-resisting layer, the shear strength of the soil mass, the reinforcement depth of the soil mass in the pit, and the diameter of the bearing pile in the pit on the safety factor of the foundation pit surge are expounded. In addition, measures such as the reinforcement of the soil mass in the passive area in the pit, the increase in the thickness of the water-resisting layer, and the reduction in the confined water level are proposed to improve the anti-surge stability of the foundation pit. A new monitoring method is proposed for characterizing uplift deformation at the bottom of the pit without affecting normal construction. The research results show that: (1) the minimum safety factor against surges, considering multiple factors, is 1.455, and the critical thickness is 5.87 m, which is in line with specifications. (2) Measures such as reinforcing the soil in the passive zone of the pit, increasing the thickness of the water-insulating layer, and lowering the bearing pressure level are used to improve the stability of the pit against surges. (3) The pit, obtained by the pit bottom counter-pressure, pumping water out of the pit, and the timely construction of the pit bottom bedding to block the program, exhibits a measured maximum bottom plate pressure of 115.189 kPa, and the deformation corresponding to the method proposed in this paper is 1.406 mm, which is better disposed in the field. The research results provide a reference basis for the judgment of anti-surge stability of foundation pits and similar engineering applications.

23 February 2026 in Measurement
Verified
Journal Article
Closed access
FMFei Meng
Fei Meng
FMFEI MENG
FEI MENG
DCDaolong Chen
Daolong Chen

11 October 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
FMFEI MENG
FEI MENG
YPYi pu Peng
Yi pu Peng
In soft soil areas, to compare the load-bearing characteristics of bag grouting piles and cement mixing piles and study the load-bearing mechanism of bag grouting piles, field tests are conducted in this study, including the comparative compressive test of bag grouting piles and cement mixing piles, and the analysis of pile axial force, pile side friction resistance, and pile end resistance. Moreover, a numerical simulation is developed using ABAQUS 2020 (finite element analysis software) for three-dimensional modeling. The numerical simulation results are compared with the field test results to verify the reliability of the numerical simulation. Furthermore, the influences of five factors are studied; namely, pile length, pile diameter, pile spacing, the thickness of the bedding layer, and grouting pressure are studied for their effects on the compressive bearing characteristics of the bag grouting pile. The results show the following: (1) For composite foundations, bag grouting piles are more effective than cement mixing piles in soft soil areas, and the former provide an 8.8% increase in the bearing characteristics. (2) With an increase in the load, the bag grouting pile experiences greater compression in the middle of the pile body, and the pile side friction resistance is increased; therefore, the pile side friction resistance can be fully developed, and the bag grouting piles have the ability to transfer the load from the top of the pile to the soil at the bottom of the pile. (3) When the external load is maximized, the sharing ratio of pile side friction resistance reaches 96.3%, which shows the excellent frictional performance of bag grouting piles. (4) Among the five factors mentioned above, the most important one is the pile diameter, followed by the pile length and pile spacing, the thickness of the bedding layer, and finally the grouting pressure. The optimal combination in this paper is a pile length of 18 m, pile diameter of 0.4 m, pile spacing of 1.0 m, bedding thickness of 0.3 m, and grouting pressure of 0.6 MPa. Therefore, changing the pile diameter can be given priority during the construction design. The findings in this paper can provide valuable insights and practical experience for the design of similar engineering projects.