A fall-detection system was implemented utilizing a 2.45 GHz continuous wave radar along with power-efficient and fully-analog integrated classifier architectures. The Power Burst Curve and the effective acceleration were derived from the short time Fourier transform, and then processed by the analog classifier. The proposed classifier architectures are based on different approximations of the Decision tree classification model. The architectures consist of three main building blocks: sigmoid function circuit, analog multiplier and an argmax operator circuit. To assess the hardware design, a thorough analysis is performed, comparing it to commonly used analog classifiers while exploiting the extracted data. The architectures were trained using Python and were compared to software-based classifiers. The circuit designs were executed using TSMC’s 90 nm CMOS process technology and the Cadence IC Suite was employed for tasks including design, schematic implementation, and post-layout simulations.

The Internet of Things (IoT) envisions the interconnection of all electronic devices, ushering in a new technological era. IoT and 5G technology are linked, complementing each other in a manner that significantly enhances their impact. As sensors become increasingly embedded in our daily lives, they transform everyday objects into “smart” devices. This synergy between IoT sensor networks and 5G creates a dynamic ecosystem where the infrastructure provided by 5G’s high-speed, low-latency communication enables IoT devices to function more efficiently and effectively, paving the way for innovative applications and services that enhance our awareness and interactions with the world. Moreover, application-oriented and multifunctional antennas need to be developed to meet these high demands. In this review, a comprehensive analysis of IoT antennas is conducted based on their application characteristics. It is important to note that, to the best of our knowledge, this is the first time that this categorization has been performed in the literature. Indeed, comparing IoT antennas across different applications without considering their specific operational contexts is not practical. This review focuses on four primary operational fields: smart homes, smart cities, and biomedical and implantable devices.

The transition from 5G to 6G wireless systems introduces new challenges at the physical layer, including the need for higher frequency operations, massive MIMO deployment, advanced beamforming techniques, and sustainable energy harvesting mechanisms. A plethora of feature articles, review and white papers, and roadmaps elaborate on the perspectives and research challenges of wireless systems, in general, including both unified physical and cyber space. Hence, this paper presents a comprehensive review of the technological challenges and recent advancements in wireless communication hardware that underpin the development of next-generation networks, particularly 6G. Emphasizing the physical layer, the study explores critical enabling technologies including beamforming, massive MIMO, reconfigurable intelligent surfaces (RIS), millimeter-wave (mmWave) and terahertz (THz) communications, wireless power transfer, and energy harvesting. These technologies are analyzed in terms of their functional roles, implementation challenges, and integration into future wireless infrastructure. Beyond traditional physical layer components, the paper also discusses the role of reconfigurable RF front-ends, innovative antenna architectures, and user-end devices that contribute to the adaptability and efficiency of emerging communication systems. In addition, the inclusion of application-driven paradigms such as digital twins highlights how new use cases are shaping design requirements and pushing the boundaries of hardware capabilities. By linking foundational physical-layer technologies with evolving application demands, this work provides a holistic perspective aimed at guiding future research directions and informing the design of scalable, energy-efficient, and resilient wireless communication platforms for the Future Internet. Specifically, we first try to identify the demands and, in turn, explore existing or emerging technologies that have the potential to meet these needs. Especially, there will be an extended reference about the state-of-the-art antennas for massive MIMO terrestrial and non-terrestrial networks.

Falls can be one of the most damaging events that elders may experience in their lives, especially when they live alone. The impact of a fall can vary from minor bruises, to life altering fractures and even become fatal. The purpose of this study is to establish a novel non-contact radar method of detecting an elderly fall when occurred in home staying. The novelty of the proposed detection technique is the exploitation of a 1D effective acceleration derived from Short Time Fourier Transform (STFT). This technique was tested utilizing a 2.45 GHz Continuous Wave (CW) Radar implemented with a Software Defined Radio (SDR) and low-cost, off-the-shelf components. Herein, we present test results that classify incidents as either falls or non-falls in line-of-sight cases. Firstly, the results are compared with the corresponding values measured with a commercial marker-based optoelectronic motion capture multi-camera system (VICON) showing high similarity. Furthermore, real-time scenarios were conducted to estimate the accuracy and the number of false alarms of the proposed method. The proposed algorithm is proved capable of exploiting the Power Burst Curve (PBC) as a preliminary factor to yield an efficient fall incident classifier based on the effective acceleration, while minimizing the required processing resources.

A novel miniature all-polarization Γ antenna array for demanding 5G and Internet of Things (IoT) applications is proposed. The antenna is designed to be able to perform Direction of Arrival (DoA) and Beamforming keeping antenna’s footprint as minimal as possible to fit in or wrapped around any IoT device. It is a non-uniform square array comprised of novel right corner dipoles which are mirror placed to additionally allow all polarization property. These properties are inherited from its approximate equivalence to a cross-dipole antenna with additional features and flexibility. An analytical mathematical formulation is presented resulting to a closed form for the Γ-dipole as well as the 4 dipoles array. Numerical simulations proved the antenna performance and verified that all of its features are approximately retained even when it is curved. The antenna is prototyped in both an improvised wire dipole (planar or curved) ad as printed on an FR-4 substrate. The measured results confirmed the analytical and numerical ones regarding the antenna all-polarization, beamforming and direction of arrival features.

Butler Matrix networks are well established as beamforming networks for phased antenna arrays. The challenge we address in this work is to cover the entire (advanced 5G or 6G) FR3 band (7–24 GHz) with a single network, while retaining low losses and minimal size. The employed multilayer topology is also well established; however, the matching between the utilized hybrid couplers and the phase shifters constitutes a major challenge for such a wideband operation. This is achieved herein by employing meander lines with appropriate curvature and introducing two distinct design methods for the Butler Matrix. The first method focuses on designing individual components separately, followed by their integration into the overall Butler Matrix structure. This approach is demonstrated through the design, prototyping, measurements, and validation of an 8 × 8 Butler Matrix beamformer, which operates across the 6–16 GHz band (FR3 Low). The second method introduces a wideband-matching technique which simplifies the implementation process by designing the Butler Matrix as a single, unified structure. This technique is applied to both 4 × 4 and 8 × 8 Butler Matrices, which are implemented and simulated for the low FR3 band. Both design methods result in wideband operation and compact size and meet the desired performance criteria.