Xiaokai Zhao

Dr. Xiaokai Zhao

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 October 2023 in Metals
Verified
Journal Article
Open access
PDF file
XZXiaokai Zhao
Xiaokai Zhao
ZMZheyuan Mu
Zheyuan Mu
HZHaopeng Zhao
Haopeng Zhao
PWPengyi Wang
Pengyi Wang
Wenjie SongWenjie Song
Wenjie Song
GYGuang Yang
Guang Yang
The inner roller exerts a supportive and thinning effect on the inner side of the tube during counter-roller spinning. In this paper, the Finite Element Analysis (FEA) model of counter-roller spinning for a 6061 aluminum alloy tube was established based on the ABAQUS/Explicit module. The deformation characteristics and the influence of inner roller geometrical parameters on the tube spinning were analyzed. The results showed that the stress–strain on the outer of the tube was greater than that of the inner, and flaring was more prone to occur in the initial stage of counter-roller spinning compared to traditional mandrel spinning. The order of the effects of geometrical parameters of the inner roller on the roundness error and wall thickness deviation was as follows: nose radius > diameter > front angle. The order of factors influencing the inner and outer spinning force was as follows: diameter > nose radius > front angle. Increasing the diameter of the inner roller can improve the spinning stability and forming accuracy of counter-roller spinning. It was beneficial to improve the forming accuracy when the nose radius of the inner roller was slightly larger than that of the outer roller. The front angle of the inner roller has little influence on the spinning forming accuracy.

13 December 2025 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
XZXiaokai Zhao
Xiaokai Zhao
HZHaopeng Zhao
Haopeng Zhao
ZMZheyuan Mu
Zheyuan Mu
YLYanhui Liu
Yanhui Liu
PWPengyi Wang
Pengyi Wang
LHLanglang Hu
Langlang Hu

1 January 2025 in Journal of Materials, Processing and Design
Verified
Journal Article
Open access
PDF file
XZXiaokai Zhao
Xiaokai Zhao
HZHaopeng Zhao
Haopeng Zhao
ZMZheyuan Mu
Zheyuan Mu
In this paper, a three-dimensional finite element model of staggered spinning of 6061 aluminium alloy thick-walled tube is established based on Abaqus simulation software. The influence of stagger distance, thinning rate and feed ratio on the forming quality of tube is analysed. The optimal process parameters were obtained as follows: stagger distance is 7mm, thinning rate is 20%, and feed ratio is 2.5mm/r. The multi-pass stagger spinning process experiment was carried out. The as-spun tube was obtained with good dimensional accuracy and mechanical properties. The average wall thickness deviation of the as-spun tube is 0.11 mm. Compared with the initial tube blank, the circumferential and axial tensile strengths of the tube formed by multi-pass stagger spinning are increased by 35MPa and 38MPa (19.13% and 20.21%), and the circumferential and axial yield strengths are increased by 69MPa and 94MPa (69.7% and 98.95%), respectively. The mechanical property of the tube was enhanced both in axial and circumferential directions by stagger spinning.