Liquid metal embrittlement is a phenomenon in which the mechanical properties of a metallic material are significantly reduced after contact with liquid metal, and the microscopic mechanism of this phenomenon is still controversial. The grain boundary penetration mechanism has recently been widely recognized, but the theory is still deficient. To refine the theory of grain boundary penetration, in this paper, the liquid metal embrittlement mechanism of aluminum by gallium is obtained by in situ EBSD, combining it with the fracture morphology features and comparing the differences of the microscopic feature changes and the crack evolution process during the in situ tensile process of embrittled and untreated aluminum specimens. The results show that the fracture elongation of aluminum decreased by 60% after being embrittled by liquid gallium at 80 °C for 40 min, and the gallium atoms entering the aluminum interior decreased the grain boundary cohesion while promoting dislocation emission. Combining the experimental results and previous studies, we divide the fracture of aluminum after liquid metal embrittlement into three stages, namely, the grain boundary penetration stage, the local fracture stage, and the integral failure stage.
This study is a multiscale experimental investigation into the embrittlement of Al-Zn-Mg aluminum alloy (7075-T6) caused by liquid metal gallium. The results of the experiment demonstrate that the tensile strength of the 7075-T6 aluminum alloy significantly weakens with an increase in the embrittlement temperature and a prolonged embrittlement time, whereas it improves with an increase in the strain rate. On the basis of the analysis of the experimental data, the sensitivity of the embrittlement of 7075-T6 aluminum alloy by liquid gallium to the loading strain rate is significantly higher compared to other environmental factors. In addition, this study also includes several experiments for microscopic observation, such as Scanning Electron Microscope (SEM) observation, Energy-Dispersive Spectrometer (EDS) spectroscopy, and Electron Back Scatter Diffraction (EBSD) analysis. The experimental observations confirmed the following: (1) gallium is enriched in the intergranular space of aluminum; (2) the fracture mode of 7075-T6 aluminum alloy changes from ductile to brittle fracture; and (3) the infiltration of liquid gallium into aluminum alloys and its enrichment in the intergranular space result in the formation of new dislocation nucleation sites, in addition to the original dislocations cutting and entanglement. This reduces the material’s ability to undergo plastic deformation, intensifies stress concentration at the dislocation nucleation point, and, ultimately, leads to the evolution of dislocations into cracks.
The cylinder expansion (CYLEX) test is commonly used to describe the adiabatic expansion of the detonation products and calibrate the equation of state (EOS) of detonation products. A CYLEX test method analogous to the T-20 (pre-set position and record the time of arrival) methodology was developed utilizing a set of probes with radial displacement difference and a high-speed pulse timer to record the radial expansion displacement of the cylinder wall. Two CYLEX tests for Dihydroxylammonium 5,5’-bitetrazole-1,1’-dioxide (TKX-50)-based explosives and two for 2, 4, 6-trinitrotoluene (TNT) were conducted using the CYLEX test method developed, and further Jones-Wilkins-Lee (JWL) EOS parameters of detonation products were determined using the BP neural network and genetic algorithm (BP-GA) program. Besides, the JWL EOS parameters obtained were numerically validated by performing the simulations of the CYLEX test, where the simulation results were consistent with the experimental data.
The initiation criterion is utilized to predict the critical detonation condition of explosives and plays a dominant role in the fields of survivability, vulnerability, and safety. In order to predict the threshold criterion of explosives initiated by fragment impact in three-dimensional scenarios, the detonation threshold velocities of Comp B (61% Hexahydro-1,3,5-trinitro-1,3,5-triazine, 39% 2,4,6-trinitrotoluene) explosive charges with different radii under the fragment impact at different polar angles and azimuth angles were obtained by numerical calculations, and further, a three-dimensional initiation criterion was established. The results show that when the impact polar angle of the fragment is fixed, the critical velocity under the same azimuth angle scenario increases as the radius of the charge decreases. When the impact azimuth angle of the fragment is fixed, the critical velocity under the same polar angle scenario is almost unaffected by the charge radius. The maximum error between the three-dimensional initiation criterion and the simulation is 3.09%, indicating the high accuracy of the established initiation criterion.