Increasing attention on microwave ultra-broadband metamaterial absorbers has been paid due to their promising applications. While most microwave ultra-broadband metamaterial absorbers developed so far are based on metallic resonant structures, dispersive dielectric water-based metamaterial opens a simpler and more versatile route for the construction of polarization- and angle- insensitive ultra-broadband absorption. Here, we review the recent progress of water-based metamaterial absorbers by providing an illustration of the mechanisms to realize ultra-broadband, tunable and multi-functional absorption. We also address the further development direction and some potential novel applications.

Promising microwave ultra-broadband water-based metasurface absorbers have attracted increasing attention due to their novel applications in EM radiation prevention, stealth technology, and energy harvesting. In this paper, the proposed water-based metasurface absorber, composed of mushroom-shaped and layer-shaped water with resin shell, can reach over 90% polarization-insensitive and wide-angle absorption from 7.2 to 100 GHz with a relative bandwidth of 173%. Moreover, the proposed absorber is reconfigurable to control the water content, salinity, and type of inside liquid for tunable absorption and infrared radiation with thermally tunable absorption. Since the experimental and simulated ultra-broadband absorption originates from multiple resonances concentrated on the top, the ground-free all-dielectric design is achieved. Furthermore, the proposed curved absorber is fabricated and demonstrated for omnidirectional absorption. The water-based metasurface absorber shows great potential in achieving both microwave and infrared radiation camouflage for practical shaped structures in both civil and military domains.

One of the core concepts from the non-Hermitian skin effect is the extended complex wave vectors (CW) in the generalized Brillouin zone (GBZ), while the origin of CW remains elusive, and further experimental demonstration of GBZ is still lacking. We show that the bulk states of an open system dynamically governed by the Lindblad master equation exhibit non-Bloch evolution which results in CW. Experimentally, we present temporal topolectrical circuits to serve as simulators for the dynamics of an open system. By reconstructing the correspondence between the bulk states of an open system and circuit voltage modes through gauge scale potentials in the circuit, the non-Bloch evolution is demonstrated. Facilitated by the simulators and proper approach to characterize the non-Bloch band proposed here, the GBZ is confirmed. Our work may advance the investigation of the dissipative topological modes and provide a versatile platform for exploring the unique evolution and topology for both closed and open systems.

Expanding the bandwidth for microwave absorption from L to Ka band with high efficiency remains challenging for broadband impedance matching. To overcome this challenge, an all-dielectric metasurface absorber composed of resin shell and saline structure is proposed to realize above 90% absorption from 0.9–40 GHz with a relative bandwidth of 191% (95.5% of theoretical limiting value) and thickness of 38 mm (115% of the minimum thickness). The extremely large bandwidth originates from coupled multiple resonance modes excited in dispersive saline structure, which can be larger with lower initial frequency by changing the geometry parameters based on the equivalent scale transformation method. Moreover, the polarization-independent and wide-angle broadband absorption are proved by both experimental and simulated results, offering practical potential application in ultrabroadband EM radiation prevention and stealth technology.

In this work, the influences of a magnetic field of 2.4 T on the macro residual stress and the status of structural defects, including grain boundaries, dislocations and the Fe-rich clusters of Ti-6Al-4V were investigated by X-ray Diffraction (XRD), Electron Backscatter Diffraction (EBSD) and magnetic measurement. The XRD test results show that the applied magnetic field can cause the relaxation and homogenization of macro residual stress. The maps of Kernel Average Misorientation (KAM) values obtained by EBSD tests present a significant dislocation multiplication caused by a magnetic field, and the rise of dislocation density was estimated to be about 32% by XRD tests. The EBSD test results also show an increase in the fraction of Coincidence Site Lattice (CSL) grain boundaries and a decrease in the fraction of low-angle grain boundaries. The results of magnetic measurement show that Ti-6Al-4V has mixed magnetism consisting of paramagnetism and weak ferromagnetism, and that the ferromagnetic saturation magnetization decreased after exposing the alloy to the magnetic field, which suggests the dissolution of the Fe-rich clusters in the alloy. These magnetically-induced changes are related to magnetoplastic effects, a kind of phenomena on which there have been some research, and the possible mechanism of them is discussed in this paper.