The purpose of this paper is to study the dimensionless characteristics of a molten salt pump and propose an approach to carry out the modeling experiment by using water instead of molten salts. External characteristics of the pump were estimated by using the steady flow model and compared with the experimental results. By taking water as the working fluid, the pathlines in the volute of the model pump were validated by the results obtained of high-speed photography. According to the derived dimensionless characteristics of the molten salt pump, the modeling experimental schemes were proposed. Adopting the validated numerical simulation model, the performance of the molten salt pump was studied in detail. The modeling experimental schemes designed according to the dimensionless characteristics are theoretically feasible. However, to carry out the experiment successfully, factors such as rotational speed, geometric size, flow rate and head should be taken into account. The flow in the pumps is similar under the similar operating condition and the external characteristics of the similar pump can be converted to each other. Compared with transporting water, the decline of the head and efficiency is within 5 per cent when the viscosity is lower than 0.01453 Pa · s. The pump is not suitable for running under the critical Reynolds number of 1.0 × 107. The current work revealed the relationships among the dimensionless performances of a molten salt pump and proposed a critical Reynolds number ReQcr for the pump running.
1 July 2019 in International Journal of Heat and Mass Transfer
Particle image velocimetry (PIV) technology was used to study steady and unsteady internal flow fields in a molten salt pump under both internal and external synchronization modes. The velocity fields in the suction chamber, impeller passage and volute were analyzed at different flow rates. The velocity distribution uniformity, velocity weighted average divergent flow angle, and circumferential component of absolute velocity were calculated on the basis of the obtained flow fields. The research is meaningful to the development of molten salt pumps, and the experimental method serves as a reference to similar rotating fluid machinery.
25 June 2019 in International Journal of Numerical Methods for Heat & Fluid Flow
Purpose: The purpose of this paper is to study the transition process from the crystalline particles appearing before the pump inlet to the stable operation of the pump. Design/methodology/approach: Firstly, a modeling test method was put forward for the high-temperature molten salt pump. Then, according to a modeling test scheme, the experiment of the solid–liquid two-phase flow was carried out by using a model pump similar to the prototype pump. Meanwhile, the numerical method to simulate the transition process of a molten salt pump was studied, and the correctness of the numerical model was verified by the experimental results. Finally, the transition process of the molten salt pump was studied by the verified numerical model in detail. Findings: In the simulation of the transition process, it is more accurate to judge the end of the transition process based on the unchanged particle volume fraction (PVF) at the pump outlet than on the periodic fluctuation of the outlet pressure. The outlet pressure is closely related to the PVF in the pump. The variation of the outlet pressure is slightly prior to that of the PVF at the pump outlet and mainly affected by the PVF in the impeller and volute. After 0.63 s, the PVF at each monitoring point changes periodically, and the time-averaged value does not change with time. Practical implications: This study is of great significance to further improve the design method of molten salt pump and predict the abrasion characteristic of the pump due to interactions with solid particles. Originality/value: A numerical method is established to simulate the transition process of a molten salt pump, and a method is proposed to verify the numerical model of two-phase flow by modeling test.
13 February 2023 in Journal of Low Temperature Physics