To improve the effectiveness of industrial robots in the textile and garment industry, it is necessary to expand the application range of electrostatic adsorption end effectors and solve the problem of automatically grasping and transferring fabrics during garment processing. Taking weft-knit fabric as an example, this paper begins by analyzing the factors that influence the electrostatic adsorption capacity, and then constructing an electrostatic adsorption capacity model based on the fabric characteristics. Next, the shape arrangement and structural parameters of the electrode plate are optimized by taking the electrostatic adsorption force model and maximizing the adsorption force per unit area. Finally, the adsorption effect of the electrostatic adsorption end effector is verified by simulation and experiment. The verification results show that the electrode with a comb-shaped arrangement and optimized structural parameters can adsorb clothing fabric well and meets the requirements of clothing automated production lines. This study provides a new method for solving the problem of automatically grasping and transferring fabrics and provides technical support for improving automation in the garment industry.
12 October 2021 in Polymers for Advanced Technologies
There are several methods of preparing nanofiber yarns, but little work has been reported using a combination of electrospinning and solution blowing methods (i.e., electrostatic-solution blow spinning) to prepare nanofiber yarns. In this study, a response surface method (RSM) based on Box–Behnken design was used to investigate the relationship between the yarn parameters and yarn diameter, and the process was optimized. The yarn diameter was simulated by electrostatic voltage, air pressure, winding speed and funnel velocity. The correlation coefficients before and after adjustment were 0.97 and 0.95, respectively, through variance analysis, which verified the accuracy of the yarn diameter model. The results showed that the influence of each experimental factor on the yarn diameter was in descending order of winding speed, electrostatic voltage, airflow and funnel velocity, and there were interactions among the factors. The BDD response model was used to obtain the best experimental conditions, which provided a good theoretical reference for the preparation of polyacrylonitrile nanofibers. In addition, the effects of voltage and air pressure on the diameter of the nanofiber and yarn and the effects of the twist coefficient on the shape and mechanical properties of the yarn were studied. The results showed that with the increase of voltage and air pressure, the diameter of the nanofiber decreased, and the yarn diameter decreased first and then increased. When the twist factor was 100, the twist angle of the yarn was 49.91°, the breaking strength was 12.92 MPa and the elongation at break was 81.34%.
4 March 2022 in The Journal of the Textile Institute
To improve visual image feature point detection with two-dimensional human body circumference measurements, this paper analyzes and compares several feature point detection algorithms, algorithm based on human body proportion, and deep-learning-based convolutional neural network algorithms. Among them, the principles and application of the Harris corner detection algorithm are described in detail. The progress in image feature points detection based on human body proportions and regions is then summarized and reviewed. Based on the convolutional neural network method, a method of calculating feature points based on the relatively mature human joint point recognition algorithm is proposed, so as to solve the problem of inaccurate positioning in traditional algorithms. Finally, the challenge of feature point detection for clothing volumes is explained. Feature point detection from visual images has significant development prospects in the two-dimensional measurement of body circumference. Related research provides a reliable theoretical reference for realizing the accurate and rapid detection of human feature points in visual images.
In this study, a chitosan-based high polymer antibacterial agent CS-g-DMC was synthesized through grafting copolymerization with an environmentally friendly initiator system of H2O2 and ascorbic acid (Vc). The CS-g-DMC was used for the long-effective antibacterial finishing of cotton fabric. The SEM, EDS, FTIR, XPS, and XRD were conducted for the characterization of the fabric. Result showed CS-g-DMC combined with cellulose macro-molecule chemical bond, and had uniformly distributed on surface of cotton fiber. After finishing, the cotton fabric had antibacterial rates against S. aureus and E. coli above 99.9% after 10 times of standard washing. The finished cotton fabric had significantly improved hydrophily, its contact angle decreased from 107° to 104°. Its breaking force significantly increased from 173.38 N to 219.33 N, and its breaking elongation and moisture transmission rate had not dropped obviously. In general, the cotton fabric finished by CS-g-DMC obtained long-effective antibacterial and increased mechanical properties, at meantime kept its comfortable capability to a great extent.