The application of superabsorbent polymers (SAPs) is hindered because their absorption capability is greatly affected by the electrolytes in a solution. A novel modified water-absorbent polymer was fabricated by solution polymerization of sulfamic acid-modified starch and acrylic acid; the swelling ratios of this absorbent polymer were 1026 g/g in deionized water and 145 g/g in 0.9% sodium chloride solution and increased by 99.5 and 13.4%, respectively, when compared with ordinary starch-grafted acrylic SAPs. The water absorption capacity was measured in water at different pH values, salt concentrations, and temperatures. In addition, water and fertilizer retentions were studied by simulated leaching tests in a soil column. The results showed that water absorption capacities of the modified SAP in salt solutions were improved due to the adsorption and transfer of water molecules by the sulfonic acid groups. Compared to the losses when there was no superabsorbent treatment, the water, nitrate, ammonium nitrogen, and water-soluble potassium losses during the salt-tolerant superabsorbent treatment were significantly reduced by 18.5, 22.8, 88.0, and 63.8%, respectively. The method introduced in this study could guide the development and wide application of salt-tolerant SAPs in agriculture and horticulture.
Coating fertilizer is an effective approach to increase the fertilizer use efficiency and reduce fertilizer application rate. However, only a few studies have focused on coating phosphorus (P) fertilizer, especially diammonium phosphate (DAP) due to its irregular shape and high specific surface area. A novel and low-cost strategy centered on wax-based surface modification and bio-based polymer coating was applied to improve the nutrient characteristics of coated DAP (CDAP). Regular DAP was modified with polyolefin wax and then coated with polyurethanes prepared from castor oil. Experimental results indicated that wax modification significantly decreased the specific surface area, angle of repose of DAP particles, increased the particle hardness, and then facilitated the formation of biopolymer-based coating. The CDAP from wax-modified DAP had better controlled-release performance compared with that from normal DAP. Findings from this study indicate that wax modification can be used as an effective technology to prepare highly efficient controlled-release P fertilizers.