Atom probe tomography has been used to investigate nanoscale features in the yttrium oxide dispersion strengthened steel ODS Eurofer, which is a perspective structural material for the reactor cores.
The study is devoted to the methodology of simulation experiments for the analysis of radiation damage of structural materials of nuclear power plants by irradiation with heavy ions and subsequent analysis with use of the ultramicroscopy and nanoindentation methods. Details of the irradiation experiments in the TIPr accelerator (Institute for Theoretical and Experimental Physics) with ion energy of 101 keV/nucleon are given. Current approaches to the analysis of radiation-induced changes in the structural phase state of samples irradiated with ions with use of transmission electron microscopy and atom probe tomography are demonstrated. Models for the evaluation of radiation hardening based on microscopic changes, as well as the capabilities of the nanoindentation method for direct measurement of the hardening of a specimen layer irradiated by ions, are considered.
29 February 2024 in Materials Science and Engineering: A
Metal Vapor Vacuum Arc (MEVVA) ion source (IS) is a unique tool for production of high intensity metal ion beam that can be used for material surface modification. From the other hand, the duoplasmatron ion source provides the high intensity gas ion beams. The MEVVA and duoplasmatron IS developed in Institute for Theoretical and Experimental Physics were used for the reactor steel surface modification experiments. Response of ferritic-martensitic steel specimens on titanium and nitrogen ions implantation and consequent vacuum annealing was investigated. Increase in microhardness of near surface region of irradiated specimens was observed. Local chemical analysis shows atom mixing and redistribution in the implanted layer followed with formation of ultrafine precipitates after annealing.