The rapid increase in emissions and the depletion of fossil fuels have led to a rapid rise in the electric vehicle (EV) industry. Electric vehicles predominantly rely on lithium-ion batteries (LIBs) to power their electric motors. However, the charging and discharging processes of LIB packs generate heat, resulting in a significant decline in the battery performance of EVs. Consequently, there is a pressing need for effective battery thermal management systems (BTMSs) for lithium-ion batteries in EVs. In the current study, a novel experimental BTMS was developed for the thermal performance enhancement of an LIB pack comprising 2 × 2 cells. Three distinct fin configurations (circular, rectangular, and tapered) were integrated for the outer wall of the lithium-ion cells. Additionally, the cells were fully submerged in phase change material (PCM). The study considered 1C, 2C, and 3C cell discharge rates, affiliated with their corresponding volumetric heat generation rates. The combination of rectangular fins and PCM manifested superior performance, reducing the mean cell temperature by 29.71% and 28.36% compared to unfinned lithium-ion cells under ambient conditions at the 1C and 2C discharge rates. Furthermore, at the 3C discharge rate, lithium-ion cells equipped with rectangular fins demonstrated a delay of 40 min in reaching the maximum surface temperature of 40 C compared to the unfinned ambient case. After 60 min of battery discharge at the 3C rate, the cell surface temperature of the rectangular fin case only reached 42.7 C. Furthermore, numerical simulations showed that the Nusselt numbers for lithium-ion cells with rectangular fins improved by 9.72% compared to unfinned configurations at the 3C discharge rate.
Experimental analysis of the effect of a lithium-ion battery thermal management system using natural convection and phase change material (PCM) at 3 C discharge rate. The cells are placed in a 2 × 2 square configuration in an acrylic housing with the capability to contain PCM. The experimental setup simulates lithium-ion batteries using ceramic heaters, producing the heat energy per unit volume as produced in a lithium-ion cell. The system placed in natural convection instantly heats up to 45 °C in 305 s. On the other hand, the system, when placed in phase change material, shows that a temperature of 45 °C is achieved in 1490 s.
Thermal energy is very crucial, and Phase Change Materials (PCM) provide methods to store it. The objective of this study is to investigate the effect of changing the angle of the Latent Thermal Energy Storage Unit (LTESU) on the amount of time required to melt the PCM. Stearic acid (PCM) was enclosed in a housing to subject it to thermal energy at different orientations. Changing the angle enhances the buoyancy force exerted on melted PCM as thermal energy is added, causing a difference in density. This density difference produces flow currents that circulate the melted PCM in the enclosure due to the hot PCM rising and surrounding the cold PCM that occupies the space left by the hot PCM. These currents are responsible for the distribution of thermal energy throughout the enclosure so that naturally turbulent flow will transfer more heat energy as compared to laminar flow. It was noted that the least amount of time needed to charge the stearic acid was at 60°. An improvement of 16.67% in terms of melting time was observed with respect to the reference case.