In this paper, a series of porous hierarchical Mg/Al layered double hydroxides (named as LDH, TTAC-MgAl-LDH, CTAC-MgAl-LDH, and OTAC-MgAl-LDH) was synthesized by a simple green hydrothermal method using wormlike micelles formed by salicylic acid and surfactants with different carbon chain lengths (0, 14, 16, and 18) as soft templates. BET, XRD, FTIR, TG, and SEM characterizations were carried out in order to investigate the structure and properties of the prepared materials. The results showed that the porous hierarchical CTAC-MgAl-LDH had a large specific surface area and multiple pore size distributions which could effectively increase the reaction area and allow better absorption capability. Benefiting from the unique architecture, CTAC-MgAl-LDH exhibited a large adsorption capacity for sulfonated lignite (231.70 mg/g) at 25 °C and a pH of 7, which outperformed the traditional LDH (86.05 mg/g), TTAC-MgAl-LDH (108.15 mg/g), and OTAC-MgAl-LDH (110.51 mg/g). The adsorption process of sulfonated lignite followed the pseudo-second-order kinetics model and conformed the Freundlich isotherm model with spontaneous heat absorption, which revealed that electrostatic adsorption and ion exchange were the main mechanisms of action for the adsorption. In addition, CTAC-MgAl-LDH showed a satisfactory long-time stability and its adsorption capacities were still as high as 198.64 mg/g after two adsorption cycles.

With the gradual improvement and implementation of unconventional wells drilling and environmental regulations, there is an urgent need for high-performance and more environmentally friendly lubricants for water-based drilling fluids (WD). Developing green oilfield chemicals from natural products is a shortcut. In this work, Abelmoschus esculentus (L.) Moench/okra has been studied as the lubricant in WD. The green drilling fluid lubricant developed demonstrates excellent lubrication performance, as well as good filtration loss reduction and inhibition of bentonite hydration expansion. The results show that with the addition of 2.5% okra slurry to water-based drilling fluid, the coefficient of friction decreased by 51.68%, the apparent viscosity (AV) increased by 51.32%, the plastic viscosity (PV) increased by 42.99%, and the fluid loss decreased by 39.88%. Moreover, through TGA, SEM, FT-IR, particle distribution tests, and contact angle tests, the lubrication mechanism of okra slurry was discussed. Finally, the economic feasibility of using okra as an environmentally friendly lubricant for drilling fluids was analyzed. This work combines agricultural products with industrial production, which not only solves industrial problems but also enhances the added value of agricultural products, providing a reference for the coordinated development of industry and agriculture.

To increase the interaction between a catalyst and large pollutant molecules in industrial wastewater, this study employed worm-like micelles created by surfactants as soft templates for synthesizing structured hydrotalcites with high specific surface areas and diverse pore sizes. Following this, the integration of these hydrotalcites with AgBr yielded supported, structured hydrotalcites that exhibited enhanced redox properties. Characterization techniques, including XRD, FT-IR, SEM, and EDS, validated the successful incorporation of AgBr into the structured hydrotalcites. Furthermore, UV–Vis DRS and electrochemical analyses revealed that the integration with AgBr narrowed the band gap of the hydrotalcites, thereby expanding their light absorption range. At 25 °C with an initial solution pH of 5 and an adsorbent dosage of 0.5 g/L, the efficiency of methyl orange removal by the composite material reached 97.69% after 60 min of dark adsorption. EPR and reactive species-trapping experiments revealed that the high-efficiency degradation of methyl orange was primarily attributed to the combined action of highly active h⁺, •O₂₋, and ¹O₂ species.