MUHAMMET ÇINAR

Dr. MUHAMMET ÇINAR

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Measurement
Verified
Journal Article
Closed access
MUHAMMET ÇINARMUHAMMET ÇINAR
MUHAMMET ÇINAR
MKMehmet Karpuzcu
Mehmet Karpuzcu
HÇHanifi Çanakcı
Hanifi Çanakcı

27 April 2019 in Civil Engineering Journal
Verified
Journal Article
Open access
PDF file
MUHAMMET ÇINARMUHAMMET ÇINAR
MUHAMMET ÇINAR
MKMehmet Karpuzcu
Mehmet Karpuzcu
HÇHanifi Çanakcı
Hanifi Çanakcı
This paper shows the results of an experimental study conducted to research the impact of waste marble powder (WMP) and fly ash (FA) on the fluidity (marsh cone flow time (MCFT), mini-slump diameter and plate cohesion meter (PCM)) and the rheological properties (viscosity and yield stress) of cement based grout (CBG) mixtures. The experiments were applied with the CBG mix including 1.00 water-binder (w/b) ratios and combined use of WMP (5-25%), FA (5-25%) and WMP+FA (10-30% + constant 25%). Test results illustrated that the rheological properties of the CBGs importantly have been improved by the addition of WMP, FA and WMP+FA to grout mix at w/b=1 ratio. Strongly shear thickening behaviour was got from the CBG mixtures the all WMP, FA and WMP+FA content. The increase in the percentage of WMP (5-25%) amount reduced the mini-slump flow diameter. Moreover, the increment in the percentage of FA (5-25%) amount increments the mini slum flow. According to the control sample, the increment in the percentage of WMP (10-25%) amount increased the mini-slump flow diameter for constant FA (25%) content. Also, the increase in WMP amount in the CBG mix, there is no effect on MCFT. Also, MCFT decreased with the increase of FA amount. Especially, FA increased the fluidity of CBG, when the WMP showed negative effect in increase the MCFT in WMP+FA content.

18 March 2017 in Arabian Journal for Science and Engineering
Verified
Journal Article
Closed access
PDF file
MUHAMMET ÇINARMUHAMMET ÇINAR
MUHAMMET ÇINAR
FCFatih Celik
Fatih Celik
HÇHanifi Çanakcı
Hanifi Çanakcı
DIA EDDIN NASSANIDIA EDDIN NASSANI
DIA EDDIN NASSANI

8 January 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
MUHAMMET ÇINARMUHAMMET ÇINAR
MUHAMMET ÇINAR
Türkiye is surrounded by active faults that have the potential to produce big earthquakes. Recently, one of these faults has become active. Two earthquakes of magnitude 7.7 and 7.6 occurred 9 h apart on 6 February 2023 in Kahramanmaraş. It is reported that 150 million tons of earthquake demolition waste (EDW) is estimated to be produced as a result of those natural hazards. This waste poses a serious risk to both the environment and human health. Its use in geotechnical applications will provide serious environmental benefits. In this study, Afşin–Elbistan fly ash (AEFA) and EDW were used to stabilize weak clayey soils in different proportions. Samples were prepared by separately adding 5, 10, 15, and 20% AEFA and EDW to high-plasticity clay. The AEFA used in this study was used because the production of AEFA is too high, and it is not used in concrete production because it does not comply with the standards and causes serious environmental problems for the region. The Atterberg limit, standard compaction, unconfined compression strength (UCS), triaxial, and California bearing ratio (CBR) tests were performed on soil samples, and samples were prepared from soil mixtures with various proportions of AEFA and EDW added. In addition, clay mixtures were prepared with EDW by keeping the AEFA ratio constant at 15% and their effects were also investigated. According to Atterberg test results, the natural soil class was determined as high-plasticity clay, the soil class of the mixtures created by adding EDW and AEFA was determined as low-plasticity clay, and all ternary mixtures were determined as low-plasticity silt. In addition, the maximum dry density increased for all mixtures, while the optimum water content decreased. A significant increase was observed in UCS test results, especially in ternary mixtures. While cohesion increased in AEFA mixtures, it decreased in ternary mixtures as the EDW ratio increased. It was observed that the internal friction angle increased in all mixtures. According to CBR test results, it was determined that the binary AEFA mixture ratio was 20%, the binary EDW mixture ratio was 10% and above, and all ratios of the ternary AEFA + EDW mixtures could be used as road sub-base material. After the major earthquake disaster, the use of EDW is of great importance for the environment. As a result, AEFA and EDW were found to enhance the geotechnical properties of clay.

11 November 2023 in Buildings
Verified
Journal Article
Open access
PDF file
MUHAMMET ÇINARMUHAMMET ÇINAR
MUHAMMET ÇINAR
The cementitious jet grout method (CJG) is one of the most preferred methods for the ground reinforcement of building foundations. As a result of the soil improvement made with the CJG, it was observed that there was a decrease in settlement, permeability, and liquefaction potential and an increase in the bearing capacity. In this study, columns with different grouting pressures (400, 450, and 500 bar) and water/cement ratios of 0.75, 1.00, and 1.25 were produced on several soil types (sand, clay, and alluvial soil) that have high liquefaction, settlement potential, and low bearing capacity. CJG columns were kept for 28 days after completion and then removed from the soil, and diameter measurements were made and significant differences were observed according to pressure and w/c ratios. Three samples were taken in CJG columns extracted from the ground. Laboratory tests were conducted to determine the physical (water absorption rate, density, and porosity) and mechanical (UCS and UPV) properties of CJG column samples. The highlighting of this paper is to build full-scale CJG columns in sandy soil, clay soil, and alluvial soil, increase the geotechnical engineering properties, and investigate the strength development, and diameter under different w/c ratios and different injection pressures. The strength of CJG columns in sandy soils was found between 36 and 15 MPa, in clay soils between 15 and 4 MPa and in alluvial soils between 32 and 15 MPa. Moreover, it was observed that there was a significant increase in the diameters with the increase in the injection pressure and a decrease in the compressive strengths. When the CJG column diameters were compared with constant injection pressure and increasing w/c ratios, the maximum increase was found to be 13% for sandy soils, 10% for clayey soils, and 14% for alluvial soils. The column diameters were 37% larger for sandy soils than clayey soils and 26% larger than alluvial soils at the same w/c ratio and constant injection pressure. In conclusion, since the results found in this study were made on a real scale in the field and for three different soil conditions, the results can be used directly in future engineering applications.

13 July 2022 in Arabian Journal of Geosciences
Verified
Journal Article
Closed access
PDF file
FÇFatih Çelik
Fatih Çelik
MUHAMMET ÇINARMUHAMMET ÇINAR
MUHAMMET ÇINAR
OAOsman Akcuru
Osman Akcuru