This work develops a finite element based multi-mass flexible rotor model for theoretical investigation of the influence of the squeeze film damper lubricant inertia on the unbalance-induced steady-state and transient vibration amplitudes of high speed turbomachinery. The rotordynamic model is developed by applying the principles of finite element analysis to discretize the rotor components, including the rotor shaft and disk, into local elements with mass, stiffness, and gyroscopic matrices. Subsequently, the local matrices are assembled together to develop the global model of the rotordynamic system. The influence of squeeze film damper lubricant inertia is incorporated into the model by using short-length cavitated damper models with retaining springs executing circular-centered orbits. Additionally, the rotordynamic model incorporating the nonlinear squeeze film damper models is iteratively solved in the time domain by applying a predictor-corrector transient modal integration numerical method and the steady-state and transient motions of the rotor system are investigated under different rotor and squeeze film damper parameters. The results of the study verify the substantial influence of squeeze film damper lubricant inertia on attenuating the vibrations of high-speed turbomachinery. Furthermore, the developed rotordynamic model delivers an efficient and powerful platform for the analysis of high-speed turbomachinery, including jet engines and gas turbines.
19 June 2019 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
This work represents closed-form analytical expressions for the operating parameters for short-length open-ended squeeze film dampers, including the lubricant velocity profiles, hydrodynamic pressure distribution, and lubricant reaction forces. The proposed closed-form expressions provide an accelerated calculation of the squeeze film damper parameters, specifically for rotordynamics applications. In order to determine the analytical solutions for the squeeze film damper parameters, the thin film equations for lubricant are introduced in the presence of the influence of lubricant inertia. Subsequently, two different analytical techniques, namely the momentum approximation method, and the perturbation method are applied to the thin film equations. Moreover, the solution for the lubricant flow equations are analytically determined to represent closed-form expressions for the hydrodynamic pressure distribution and the velocity component profiles in squeeze film dampers. Additionally, the expressions for the hydrodynamic pressure distribution are integrated over the journal surface, either numerically or analytically by using Booker’s integrals, to develop expressions for the fluid film reaction forces. Lastly, the developed squeeze film damper models are incorporated into simulation models in Matlab and Simulink®, and the results are compared against a well-established force coefficient model to verify the accuracy of the calculations. The results of the simulations verify the effect of the lubricant inertia components, namely the convective and temporal (i.e., unsteady) inertia components on the squeeze film damper dynamics, including hydrodynamic pressure distribution and fluid film reaction forces. Additionally, the simulation results suggest a close agreement between the proposed models and the results in the literature.
This work proposes a numerical model that incorporates the effect of lubricant inertia on the hydrodynamic pressure distribution, fluid film reaction forces, and the fluid velocity component profiles for finite-length open-ended squeeze film dampers (SFDs). Firstly, the thin film flow equations for the SFD in presence of fluid inertia effects are introduced. Furthermore, a small first-order perturbation by means of the expressions for the fluid film velocity components and the lubricant pressure distribution that are expanded in power series of the squeeze film Reynolds number is applied to the flow equations. Subsequently the developed lubricant flow equations are solved to develop expressions for the velocity component profiles and the hydrodynamic pressure distribution in SFDs. The pressure expression is numerically solved by using Gauss–Seidel method with finite difference discretization. Moreover, the fluid film reaction forces are determined by numerically integrating the hydrodynamic pressure expressions over the journal surface. Additionally, the proposed pressure distribution expression and the numerical SFD forces are incorporated into a simulation model and the simulation results are compared with the existing models in the literature under different operating conditions, including eccentricity ratios and inertia effects (i.e., Reynolds numbers). The simulation results demonstrate the significant influence of both convective and temporal (i.e., unsteady) lubricant inertia terms on the SFD hydrodynamic pressure distribution and the fluid film reaction forces. Furthermore, the proposed SFD model is incorporated into a multi-mass flexible rotordynamic model to evaluate the effect of SFD fluid inertia on the mass unbalance induced steady-state vibrations of the rotor and the nodal transient orbits by implementing finite element method and transient modal integration with predictor–corrector solver. The results of the analysis demonstrate the significant effect of fluid inertia on the resonance frequencies of the rotor and the steady-state vibration amplitudes and the transient orbits at the resonance zone.
The energy of wind can be transferred to the generator by employing a gearbox or through an intermediate medium such as hydraulic fluids. In this method, a high-pressure hydraulic system is utilized to transfer the energy produced from a wind turbine to a central generator. The speed control of wind driven hydraulic machinery is challenging, since the intermittent nature of wind imposes the fluctuation on the wind power generation and consequently varies the frequency of voltage. On the other hand, as the load of the generators increases, the frequency of the voltage drops. Therefore, hydraulically connected wind turbine and generator need to be controlled to maintain the frequency and compensate for the power demands. This paper introduces a closed loop gain scheduling flow control technique to maintain a constant frequency at the wind turbine generator. The governing equations of the renewable energy transfer system are derived and used to design the control system. The mathematical model is verified with a detailed model built using the SimHydraulics toolbox of MATLAB. The speed control profile obtained from a gain scheduling PI controller demonstrates a high performance speed regulation. The simulation results demonstrate the effectiveness of both the proposed model and the control technique.
18 December 2016 in International Journal of Aerospace Engineering
This work represents a pressure distribution model for finite length squeeze film dampers (SFDs) executing small amplitude circular-centered orbits (CCOs) with application in high-speed turbomachinery design. The proposed pressure distribution model only accounts for unsteady (temporal) inertia terms, since based on order of magnitude analysis, for small amplitude motions of the journal center, the effect of convective inertia is negligible relative to unsteady (temporal) inertia. In this work, the continuity equation and the momentum transport equations for incompressible lubricants are reduced by assuming that the shapes of the fluid velocity profiles are not strongly influenced by the inertia forces, obtaining an extended form of Reynolds equation for the hydrodynamic pressure distribution that accounts for fluid inertia effects. Furthermore, a numerical procedure is represented to discretize the model equations by applying finite difference approximation (FDA) and to numerically determine the pressure distribution and fluid film reaction forces in SFDs with significant accuracy. Finally, the proposed model is incorporated into a simulation model and the results are compared against existing SFD models. Based on the simulation results, the pressure distribution and fluid film reaction forces are significantly influenced by fluid inertia effects even at small and moderate Reynolds numbers.
7 April 2018 in SAE International Journal of Fuels and Lubricants
This work develops a comprehensive thermohydrodynamic (THD) model for high-speed squeeze film dampers (SFDs) in the presence of lubricant inertia effects. Firstly, the generalized expression for Reynolds equation is developed. Additionally, in order to reduce the complexity of the hydrodynamic equations, an average radial viscosity is defined and integrated into the equations. Subsequently, an inertial correction to the pressure is incorporated by using a first-order perturbation technique to represent the effect of lubricant inertia on the hydrodynamic pressure distribution. Furthermore, a thermal model, including the energy equation, the Laplace heat conduction equations in the surrounding solids (i.e. the journal and the bush), and the thermal boundary conditions at the interfaces is constructed. Moreover, the system of partial differential hydrodynamic and thermal equations is simultaneously solved by using an iterative numerical algorithm. The proposed model is incorporated into a simulation model and the results are represented at different SFD journal speeds and eccentricity ratios. According to the results of the analysis, the fluid film reaction forces are significantly influenced by both the lubricant thermal effects and inertia.