Sungjun Hwang

Mr. Sungjun Hwang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 August 2024 in Polymer Composites
Verified
Journal Article
Open access
SHSungjun Hwang
Sungjun Hwang
GFGavin Fowler
Gavin Fowler
YHYousoo Han
Yousoo Han
DGDouglas J. Gardner
Douglas J. Gardner
Wood flour (WF) at 10 wt.% and 20 wt.% loadings was used as a reinforcing filler to enhance the applicability of polypropylene (PP) for 3D printing. After performing printability tests of PP wood plastic composites (WPCs), the mechanical properties of both injection‐molded and 3D‐printed PP WPC specimens were explored. Test specimens were prepared from 3D printed hexagons for analyzing the mechanical properties. Adding WF to neat PP increased the storage modulus and the glass transition temperature while decreasing the degree of crystallinity and the coefficient of thermal expansion, while enhancing the printability of neat PP. The tensile strength, tensile modulus of elasticity, flexural strength, and flexural modulus of elasticity of injection‐molded neat PP improved by up to 21%, 59%, 30%, and 56%, respectively, with 20 wt.% WF. However, the impact strength of injection‐molded neat PP decreased by 85%, with 20 wt.% WF. After 3D printing, the tensile strength and tensile modulus of elasticity of printed neat PP increased by up to 84% and 60%, respectively, with 20 wt.% WF. The flexural strength and flexural modulus of elasticity of neat printed PP remained unchanged compared to those of PP filled with 20 wt.% WF, while the impact strength decreased by 87%. Highlights: WF was used as a reinforcement in polypropylene designed for 3D printing A pilot‐scale, pellet‐fed 3D printer was used to print hollow hexagons, and then test specimens were fabricated from these hexagons for mechanical properties The tensile and flexural properties of 3D printed neat polypropylene improved, while the impact strength decreased after adding 20 wt.% WF to the neat PP.

27 November 2023 in Cellulose
Verified
Journal Article
Open access
PDF file
SHSungjun Hwang
Sungjun Hwang
CWColleen C. Walker
Colleen C. Walker
SOSoydan Ozcan
Soydan Ozcan
HTHalil Tekinalp
Halil Tekinalp
YHYousoo Han
Yousoo Han
DGDouglas J. Gardner
Douglas J. Gardner
Three types of wood pulp feedstocks including bleached softwood kraft, unbleached softwood kraft and old corrugated containers were disk refined to produce cellulose nanofibrils at different fineness levels ranging from 50 to 100%, and the resulting aqueous suspensions of cellulose nanofibrils were spray dried. The spray drying experiments were carried out to examine different processing conditions for the different CNF feedstock types and fines level at various suspension concentrations to produce dry samples with free-flowing powder morphologies. The fineness levels and solids contents of CNF suspensions were set to 80% or more and 1.8% or less, respectively. If the solids content of the CNF solutions was high and the fibrillation level was low, plugging was experienced in the spray head because of the high viscosity of the suspensions, resulting in production of poor-quality powders. In terms of reduction in processing energy, even if the CNF suspension solids content was increased to 1.5 wt.%, the powder quality and the production yields were excellent. It was confirmed that high-quality powder under 20 µm were produced at a 90% fibrillation level of all CNF feedstocks. The resulting dry CNF powders were characterized to determine particle size distributions and morphological properties via a scanning electron microscope and a laser diffraction particle size analyzer. The particle sizes were smaller at higher fibrillation levels and lower solids content of the CNF suspensions. The CNF suspension derived from bleached kraft pulp, the average particle size decreased by 43% and 33% with the lowered solids contents from 1.8 to 1%, and the increased fineness levels from 80 to 100%, respectively.

14 October 2023 in Polymers
Verified
Journal Article
Open access
PDF file
SHSungjun Hwang
Sungjun Hwang
CWColleen C. Walker
Colleen C. Walker
DJDonna A. Johnson
Donna A. Johnson
YHYousoo Han
Yousoo Han
DGDouglas Gardner
Douglas Gardner
Enzyme-treated cellulose nanofibrils (CNFs) were produced via a lab-scale mass colloider using bleached kraft pulp (BKP) to evaluate their processability and power requirements during refining and spray-drying operations. To evaluate the energy efficiency in the CNF refining process, the net energy consumption, degree of polymerization (DP), and viscosity were determined. Less energy was consumed to attain a given fines level by using the endoglucanase enzymes. The DP and viscosity were also decreased using the enzymes. The morphological properties of the enzyme-pretreated spray-dried CNF powders (SDCNFs) were measured. Subsequently, the enzyme-pretreated SDCNFs were added to a PP matrix with MAPP as a coupling agent. The mixture was then compounded through a co-rotating twin-screw extruder to determine whether the enzyme treatment of the CNFs affects the mechanical properties of the composites. Compared to earlier studies on enhancing PMCs with SDCNF powders, this research investigates the use of enzyme-pretreated SDCNF powders. It was confirmed that the strength properties of PP increased by adding SDCNFs, and the strength properties were maintained after adding enzyme-pretreated SDCNFs.

10 July 2024 in Cellulose
Verified
Journal Article
Open access
PDF file
SHSungjun Hwang
Sungjun Hwang
YHYousoo Han
Yousoo Han
DGDouglas Gardner
Douglas Gardner
Micro- and nano-scale cellulosic fillers exhibit excellent dispersion and distribution within a thermoplastic matrix during the process of melt compounding or injection molding. In this study, spray-dried cellulose nanofiber (SDCNF) powders were manufactured using a pilot-scale rotating disk atomizer spray dryer. Bleached Kraft pulp (BKP), unbleached Kraft pulp (UKP), and old corrugated cardboard pulp (OCC) fibrillated at a fines level of 90% were used as feedstock materials for spray-drying. BKP-, UKP-, and OCC- SDCNFs were compounded with polypropylene using a twin screw co-rotating extruder. Maleic anhydride grafted polypropylene (MAPP) was used as a coupling agent in the composite formulations. The tensile, flexural, and impact properties of SDCNF-filled PP composites increased at 10 wt% SDCNF loading. The presence of SDCNFs in the PP matrix resulted in faster crystallization and a 12% reduction in the degree of crystallinity of the neat PP. The coefficient of thermal expansion (CTE) of neat PP was reduced by up to 31% attributable to the presence of the SDCNFs. Application of the SDCNF-reinforced PP composites in 3D printing reduced the shrinkage rate of the printed neat PP by 39%, and the printability of the PP was significantly improved with the addition of the SDCNFs.

10 November 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
SHSungjun Hwang
Sungjun Hwang
YHYousoo Han
Yousoo Han
DGDouglas Gardner
Douglas Gardner
The ultrasonic-assisted spray dryer, also known as a nano spray dryer and predominantly used on a lab scale in the pharmaceutical and food industries, enables the production of nanometer-sized particles. In this study, the nano spray dryer was applied to cellulosic materials, such as cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs). CNC suspensions were successfully dried, while the CNF suspensions could not be dried, attributable to their longer fibril lengths. The nano spray drying process was performed under different drying conditions, including nebulizer hole sizes, solid concentrations, and gas flow rates. It was confirmed that the individual particle size of nano spray-dried CNCs (nano SDCNCs) decreased as the nebulizer hole sizes and solid contents of the suspensions decreased. The production rate of the nano spray dryer increased with higher solid contents and lower gas flow rates. The resulting nano SDCNCs were added to a polyvinyl alcohol (PVA) matrix as a reinforcing material to evaluate their reinforcement behavior in a plastic matrix using solvent casting. After incorporating the 20 wt.% nano SDCNCs into the PVA matrix, the tensile strength and tensile modulus elasticity of the neat PVA nanocomposite film increased by 22% and 32%, respectively, while preserving the transparency of the films.

9 August 2026 in Journal of Applied Polymer Science
Verified
Journal Article
Open access
PDF file
SHSungjun Hwang
Sungjun Hwang
SJStefan N. E. Johansson
Stefan N. E. Johansson
YHYousoo Han
Yousoo Han
DGDouglas Gardner
Douglas Gardner
Lignin, an environmentally friendly byproduct from pulping and biorefinery processes, was incorporated into polypropylene (PP) as ground and spray‐dried powders. The effects of lignin morphology, particle size, and loading on the mechanical, rheological, viscoelastic, and thermal properties of PP composites were evaluated. Spray‐dried lignin powders exhibited a smaller average particle size and a more uniform circularity distribution than ground lignin powders. After adding 5 wt% lignin to PP, the mechanical properties of neat PP decreased, with further reductions observed at 10 wt%. The incorporation of lignin powders reduced the complex viscosity of PP, with composites containing spray‐dried lignin exhibiting lower viscosity than those containing ground lignin powders. The storage and loss modulus of PP decreased at a lignin loading of 5 wt% but increased at 10 wt%, with higher values observed in composites containing ground lignin than in those containing spray‐dried lignin. The crystallization onset temperature of PP showed no significant change with lignin addition, whereas the degree of crystallinity decreased. The coefficient of thermal expansion (CTE) decreased at a lignin loading of 5 wt% but increased at 10 wt%, with spray‐dried lignin exhibiting lower CTE values than ground lignin at the same loading.