Despite their effectiveness in preventing icing, hydrophobic coatings possess drawbacks such as susceptibility to detachment and limited wear resistance, leading to inadequate longevity in melting ice/snow. To enhance the surface stability and durability of superhydrophobic coatings, nanoparticle/epoxy formulations were developed using three types of nanoparticles, two dispersion techniques, three application methods, and two epoxy resin introduction approaches. Testing encompassed water contact angle measurements, assessment of ice adhesion force, and determination of icing rates on asphalt concrete coated with these hydrophobic formulations. Fourier-transform infrared spectroscopy was employed to analyze the molecular structures of the coatings, while scanning electron microscopy facilitated observation of the surface morphology of the hydrophobic coatings. The findings indicated that nano-ZnO, TiO₂, and SiO₂ particles could be modified into hydrophobic forms using stearic acid. Application of the hydrophobic coating improved the concrete’s hydrophobicity, reduced ice adhesion strength on both concrete and asphalt, and delayed the onset of icing. Furthermore, optimal dosages of stearic acid, nanoparticles, and epoxy resin were identified as crucial parameters within specific ranges to ensure the optimal hydrophobicity and durability of the coatings.

Despite their anti-icing ability, hydrophobic coatings have the disadvantages of easy falling off and poor wear resistance, resulting in insufficient durability of ice/snow melting. To improve the surface stability and durability of superhydrophobic coatings, nanoparticle/epoxy coatings were prepared with three types of nanoparticles, two types of dispersion methods, three types of application methods and two types of introduction methods of epoxy resin. Water contact angles, ice adhesion force and icing rate of asphalt concrete coated with hydrophobic coatings were tested. The molecular structures of coatings were analyzed by Fourier transform infrared spectroscopy. The surface morphology of hydrophobic coatings was observed using Scanning electron microscopy. Results indicated that nano-ZnO, TiO2 and SiO2 particles can be modified into hydrophobicity by stearic acid. The hydrophobic coating could improve the hydrophobicity of concrete, reduce the adhesion strength of ice and asphalt concrete and delay the beginning icing time. Moreover, The dosages of stearic acid, nanoparticle and epoxy resin need to be in a certain range to ensure the best hydrophobicity and durability of coatings.