The incorporation of ejectors into heat pump and refrigeration cycles has been the subject of growing interest, largely due to their simple structure, high reliability, and cost-effectiveness. This paper investigates the recent advancements in novel design concepts of ejector-enhanced vapor compression heat pump and refrigeration cycles. An overview of novel single-stage and two-stage compression cycles utilizing a single or multiple ejectors is provided. First, the system setup, operational principles, description, and figures of the existing schemes are provided. Second, the main results, such as the coefficient of performance (COP), volumetric heating capacity and exergy destruction, are discussed. In conclusion, the paper presents a coherent summary of the current developments, future prospects, and the current knowledge gap. A plethora of research is present in developing theoretical systems with high efficiency. However, experimental tests for real-life implementations are limited. This review aims to provide the reader with an overview of recent theoretical and experimental studies.
Most organic waste from food production is still not used for energy production. From the perspective of energy production, one option is to valorise the properties of organic waste. The fruit juice industry is growing rapidly and generates large amounts of waste. One of the main wastes in food and fruit juice processing is peach pits and apple peels. The aim of this study was to analyse the influence of torrefaction temperature on the properties of food waste, namely apple peels, peach pits and pea shells, in order to improve their energy value and determine their potential for further use and valorisation as a renewable energy source. The aim was to analyse the influence of different torrefaction temperatures on the heating value (HHV), mass yield (MY) and energy yield (EY) in order to better understand the behavior of the thermal properties of individual selected samples. The torrefaction process was carried out at temperatures of 250 °C, 350 °C and 450 °C. The obtained biomass was compared with dried biomass. For apple peels, HHV after torrefaction was (28 kJ/kg), MY decreased by (66–34%), while EY fell by (97–83%). Peach pits, despite a higher HHV after torrefaction (18 kJ/kg), achieved low MY (38–89%) and EY (59–99%), which reduces their efficiency in biochar production. Pea peels had EY (82–97%) and a lower HHV after torrefaction (11 kJ/kg), but their high ash content limits their wider use. The results confirm that, with increasing temperature, MY and EY for all selected biomasses decrease, which is a consequence of the degradation of hemicellulose and cellulose and the loss of volatile compounds. In most cases, increasing the torrefaction temperature improved the resistance to moisture adsorption, as this is related to the thermal process that causes structural changes. The results showed that the torrefaction process improved the hydrophobic properties of the biomass samples. Temperature was seen to have a great impact on mass energy efficiency. Apple peels generally had the highest mass and energy yield.
The imperative to combat climate change necessitates the rapid implementation of technologically advanced, zero-emission renewable energy solutions, particularly considering the mounting energy demands and the pressing need to mitigate global warming. The proposed SOFC system, integrated with a modified Rankine Cycle and CCUS technology, offers a highly efficient, renewable system with a net-zero carbon footprint, utilising green biogas as an alternative. The fully integrated system at continuous operation does not require outside heat sources and, besides, its main electricity production can supply 231 households with hot sanitary water. A base case and sensitivity analysis of the system was conducted studying different operating parameters. The base case simulation, conducted at SOFC/reformer operating temperatures of 850 °C/650 °C and operating parameters S/C = 2.5, Uf = 0.70 Ua = 0.1806, yielded an overall efficiency of 71.64%, with a 67.70% electrical efficiency. Further simulations demonstrated that a 1.60% and 1.53% increase in the overall and electrical efficiencies of the proposed alternative, respectively, would be achieved at SOFC/reformer operating temperatures of 950 °C/650 °C. The simulated hybrid system represents a competitive installation in the renewable energy market, which offers a viable and sustainable alternative to traditional forms of energy generation.
Synthetically produced biofuels play a critical role in the energy transition away from fossil fuels. Biofuels could effectively lower greenhouse gas (GHG) emissions and contribute to better air quality. One of these biofuels is bioethanol, which could act as a gasoline replacement. For this purpose, a simulation of bioethanol production through lignocellulosic biomass fermentation, focused on distillation, was carried out in simulation software Aspen Plus. Since the possibility of absolute ethanol production through distillation is limited by the ethanol–water azeotrope, pressure swing distillation (PSD) was used to obtain fuel-grade ethanol (EtOH) with a fraction of 99.60 wt.%. The flowsheet was optimised with NQ analysis, which is a simple optimisation method for distillation columns. We found that the PSD has the potential to concentrate the EtOH to a desired value, while simultaneously removing other unwanted impurities whose presence is a consequence of pretreatment and fermentation processes.
6 May 2024 in Thermal Science and Engineering Progress