The geometric alignment of highways directly affects the fuel consumption of motor vehicles. To analyze the impact of the road gradient on fuel consumption, actual road tests were conducted in plateau and mountainous areas. Geographic Information Systems (GISs) were used to calculate road gradients, and Vehicle Specific Power (VSP) distributions were obtained through testing, serving as inputs for the motor vehicle emission simulator (MOVES) model. Finally, the simulation results were verified against the experimental results. The findings indicate a strong positive correlation between road gradients ranging from −5% to +5%, the VSP, and fuel consumption. At a constant gradient, the fuel consumption rate increases with the vehicle speed; the fuel consumption factor is lowest at 60 km/h and highest at 40 km/h. Under both constant and actual driving speeds, when the absolute values of uphill and downhill gradients are the same, the average fuel consumption for both uphill and downhill driving shows that, at gradients of 1% to 3%, the fuel savings from downhill driving can offset the additional fuel consumption on uphill driving. At gradients of 4% to 6%, the increase in fuel consumption on uphill driving surpasses the savings from downhill driving. During uphill climbs, lower speeds within the mid-to-low range result in lower fuel consumption and greater reserve power. The MOVES model demonstrates good adaptability in plateau and mountainous areas.

Fractal theory was used to characterize particles and particle trapping parameters to accurately predict the particle filtration process inside a gasoline engine particle filter (GPF). The particles were fractal aggregates, and the fractal dimension (D_f) was introduced to redefine the particle size. The porous medium inside the particle filter was a solid phase fractal. The pore tortuosity fractal dimension (D_t) and the pore area fractal dimension (D_a) were introduced to define the fiber length of the trap. The Brownian diffusion coefficient and permeability were modified. A new fractal numerical model of GPF filtration efficiency was proposed based on the classical filtration theory. The results show that the fractal expansion model of filtration efficiency has good applicability. The influence of GPF structural parameters on filtration efficiency and pressure drop was analyzed. In this study, two performance metrics, trapping efficiency and pressure drop, were considered by fractal expansion filtration modeling. It is possible to increase or decrease filtration efficiency by adjusting the porosity and pore diameter.

This paper investigated the physical and chemical properties of gasoline direct injection (GDI) engine particulate matter (PM). The physical properties mainly included the particulate aggregate morphology, primary particle size, and internal nanostructure. High-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) were used to obtain particle morphology information and to conduct image processing and analysis. The chemical characterization tests included X-ray photoelectron spectroscopy (XPS), energy dispersive scanning (EDS), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA). XPS can be used to observe the content of carbon and oxygen components and the surface carbon chemistry status, EDS can be used to obtain the elemental composition of particles, and TGA is used to analyze the oxidative kinetics of particles. Samples were collected from the exhaust emissions of a passenger vehicle compliant with China’s VI emission standards under China Light-Duty Vehicle Test Cycle (CLTC) test conditions. The study found that the particle morphology mainly comprised primary particles stacked on top of each other to form agglomerate structures, and the primary particles exhibited a core–shell structure. Analysis showed that carbon and oxygen were the predominant components of the particles, with other metallic elements also present. The XPS observations agreed with the FTIR results, indicating a small amount of oxygen was present on the particle surface and that the carbon components consisted mainly of sp2 hybridized graphite and sp3 hybridized organic carbon. The TGA results indicated high characteristic temperatures and low oxidation activity.

The cell structure of a gasoline particulate filter (GPF) is made up of thousands of individual cells. Although the symmetric square cell structure of the GPF is commonly used internationally, several cell designs have been proposed to reduce the pressure drop in the GPF trapping process. The aim of this paper was to use AVL-Fire software to establish GPF models of different cell structures, mainly including the symmetric square cell structure, asymmetric square cell structure, and symmetric hexagonal cell structure, and analyze the GPF pressure drop characteristics of different cell structures according to the carrier structural parameters and altitude. The results show that compared with the pressure drop of the symmetric square cell structure, the pressure drop of the asymmetric cell structure with inlet/outlet side length ratios ranging from 1.1 to 1.4 is decreased by 4.61%, 9.07%, 12.19%, and 13.22%, respectively, and the pressure drop of the symmetric hexagonal cell structure is decreased by 33.17%. Both asymmetric and symmetric hexagonal cell structure GPFs can decrease the pressure drop during trapping by increasing the cell density. From 200 CPSI to 300 CPSI, the pressure drop of the asymmetric cell structure with inlet/outlet side length ratios ranging from 1.1 to 1.4 is decreased by 20.43%, 20.53%, 20.39%, and 18.56%, respectively, and the pressure drop of the symmetric hexagonal cell structure is decreased by 18.70%. The pressure drop values of GPFs with asymmetric and symmetric hexagonal cell structures show an increasing trend with an increasing filter wall thickness and inlet/outlet plug length. The pressure drop values of GPFs with asymmetric and symmetric hexagonal cell structures show an increasing trend with an increasing altitude, and the larger the inlet/outlet ratio, the more significant the increase in the pressure drop.