Zizhuo Liu

Dr. Zizhuo Liu

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2024 in Optical Materials Express
Verified
Journal Article
Closed access
BWBin Wang
Bin Wang
XYXuezhe Yu
Xuezhe Yu
YZYugang Zeng
Yugang Zeng
WGWeijie Gao
Weijie Gao
WCWei Chen
Wei Chen
LWLijun Wang
Lijun Wang
Uniform quantum dots (QDs) with a narrowed linewidth of photoluminescence (PL) are crucial for developing high-performance QD lasers. This study focuses on optimizing the growth conditions of InAs QDs on (001) InP substrates using metal-organic chemical vapor deposition (MOCVD), targeting applications in 1.55 µm QD lasers. By fine-tuning growth parameters such as the V/III ratio, deposition thickness, and growth temperature, we attained a QD density of 4.13 × 1010 cm−2. Further, a narrowed PL full width at half maximum (FWHM) of 40.1 meV was achieved in a five-stack InAs QD layer. This was accomplished using the double-cap technique, which reduced the height dispersion of QDs and shifted the emission wavelength to 1577 nm. Broad-area lasers incorporating a five-stack optimized InAs/InAlGaAs structure demonstrated a low threshold current density of 80 A/cm2 per QD layer, and a saturation power of 163 mW in continuous-wave (CW) mode at room temperature.

28 November 2024 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
HLHongxiao Li
Hongxiao Li
ZLZizhuo Liu
Zizhuo Liu
NZNing Zhuo
Ning Zhuo
YSYongqiang Sun
Yongqiang Sun
MGMin Gong
Min Gong
FLFengqi Liu
Fengqi Liu
Lateral grating is an effective and concise method for realizing single-mode laser sources, and it exhibits significant research value due to its regrowth-free characteristic and ideal wavelength reliability. In this study, by combining a third-order lateral grating design with an advanced fabrication process, we demonstrate a lateral grating distributed feedback (DFB) quantum cascade laser (QCL) emitting around 4.7 μm with ideal single-mode performance and emission wavelength stability. A single-longitudinal-mode output power of 13 mW is achieved, with a side mode suppression ratio of 20 dB, and the wavelength shift ratio is as low as 0.04 nm mA−1, indicating exceptional wavelength stability. Benefiting from the improvements in high-order lateral grating design and the high-quality deep etching grating production, this research on lateral grating DFB QCLs simplifies the manufacturing process and controls the cost of mid-infrared light sources. This is of great significance for promoting the commercialization of mid-infrared QCLs.

26 December 2023 in Chemosensors
Verified
Journal Article
Open access
PDF file
KMKedi Ma
Kedi Ma
ZLZizhuo Liu
Zizhuo Liu
FCFengmin Cheng
Fengmin Cheng
YPYang Pengchang
Yang Pengchang
HLHongxiao Li
Hongxiao Li
JZJinchuan Zhang
Jinchuan Zhang
In this research, we demonstrate a wavelength-stable continuous wave (CW) distributed feedback (DFB) quantum cascade laser (QCL) emitting at 7.2 μm using a surface metal grating approach without epitaxial regrowth. The deep metal grating provides an appropriate DFB coupling coefficient and enhanced thermal extraction, resulting in improved lasing performance and the realization of impressive wavelength stability. Quantitatively, the temperature tuning coefficient of the single-mode emission is only 0.54 nm/°C from 20 °C to 70 °C, and the current tuning coefficient of the single-mode emission is 3.2 nm/A from 1.0 A to 1.6 A. A DFB-QCL with a 2 mm cavity length exhibits a low threshold current of 0.6 A and a power of 1.1 W with a slope efficiency of 1 W/A in the CW mode at 300 K. A single-mode operation with a side mode suppression ratio of 33 dB and a single-lobed far-field without beam steering is obtained in the working temperature range of 20–70 °C The improved wavelength stability using a deep surface metal grating approach promises simplified fabrication, which is meaningful for the commercial applications of QCLs.

31 October 2025 in Optics Letters
Verified
Journal Article
Closed access
WGWeijie Gao
Weijie Gao
XYXuezhe Yu
Xuezhe Yu
ZLZizhuo Liu
Zizhuo Liu
BWBin Wang
Bin Wang
YZYugang Zeng
Yugang Zeng
LWLijun Wang
Lijun Wang
Based on an optimized InAs/(001) InP quantum dot (QD) growth process, we systematically characterized 1.55 μm InAs QD lasers and demonstrated markedly improved high-temperature operation. Continuous-wave lasing above 105°C was achieved both in Fabry–Pérot (FP) devices with five QD layers in the broad-area (BA) geometry and nine QD layers in a narrow-ridge geometry. Under pulsed operation, these FP-BA lasers sustained lasing up to 120°C, and it reached a low threshold current density of 296 A/cm 2 (59.2 A/cm 2 per QD layer).

10 April 2024 in Optical Materials Express
Verified
Journal Article
Closed access
BWBin Wang
Bin Wang
XYXuezhe Yu
Xuezhe Yu
YZYugang Zeng
Yugang Zeng
WGWeijie Gao
Weijie Gao
WCWei Chen
Wei Chen
LWLijun Wang
Lijun Wang
We address and correct errors identified in our previously published article [ Opt. Mater. Express 14, 1074 (2024)10.1364/OME.521709 ]. The corrections necessitate modifications to the text of the original paper, leading to its rephrasing for clarity and accuracy.

24 July 2025 in Sensors
Verified
Journal Article
Open access
PDF file
ZLZizhuo Liu
Zizhuo Liu
HLHongxiao Li
Hongxiao Li
JCJiagang Chen
Jiagang Chen
ACAnlan Chen
Anlan Chen
SNShan Niu
Shan Niu
FLFengqi Liu
Fengqi Liu
In this work, we present a high-performance tapered quantum cascade laser (QCL) designed to achieve both high output power and low divergence angle. By integrating a tapered waveguide with a Fabry–Perot structure, significant improvements of tapered QCL devices in both output power and beam quality are demonstrated. The optimized 50 µm wide tapered QCL achieved a maximum output power of 2.76 W in pulsed operation with a slope efficiency of 3.52 W/A and a wall-plug efficiency (WPE) of 16.2%, while reducing the divergence angle to 13.01°. The device maintained a maximum power of 1.34 W with a WPE exceeding 8.2%, measured under room temperature and continuous wave (CW) operation. Compared to non-tapered Fabry–Perot QCLs, the tapered devices exhibited a nearly 10-fold increase in output power and over 200% improvement in WPE. This work provides a promising pathway for advancing mid-infrared laser technology, particularly for applications requiring high power, low divergence, and temperature stability.