This work aimed to study the influence of the polybutylene succinate (PBS) content on the physical, thermal, mechanical, and chemical properties of the obtained polylactic acid (PLA)/PBS composite fibers. PLA/PBS blend fibers were prepared by a simple melt-blown process capable of yielding nanofibers. Morphological analysis revealed that the fiber size was irregular and discontinuous in length. Including PBS affected the fiber size distribution, and the fibers had a smoother surface with increased amounts of added PBS. Differential scanning calorimetry analysis (DSC) revealed that the crystallization temperature of the PLA sheet (105.8 °C) was decreased with increasing PBS addition levels down to 91.7 °C at 10 wt.% PBS. This suggests that the addition of PBS may affect PLA crystallization, which is consistent with the X-ray diffraction analysis that revealed that the crystallinity of PLA (19.2%) was increased with increasing PBS addition up to 28.1% at 10 wt% PBS. Moreover, adding PBS increased the tensile properties while the % elongation at break was significantly decreased.

This research aimed to prepare nonwovens from polylactic acid and polybutylene succinate using the melt-blown process while varying the melt-blown process parameters, including air pressure (0.2 and 0.4 MPa) and die-to-collector distance (15, 30, and 45 cm). Increasing the air pressure and die-to-collector distance resulted in the production of smaller fibers. Simultaneously, the tensile strength was dependent on the polymer, air pressure, and die-to-collector distance used, and the percentage elongation at the break tended to increase with an increasing die-to-collector distance. Regarding thermal properties, the PBS nonwovens exhibited an increased level of crystallinity when the die-to-collector distance was raised, consistent with the degree of crystallinity obtained from X-ray diffraction analysis. Polylactic acid could be successfully processed into nonwovens under all six investigated conditions, whereas nonwoven polybutylene succinate could not be formed at a die-to-collector distance of 15 cm. However, both polymers demonstrated the feasibility of being processed into nonwovens using the melt-blown technique, showing potential for applications in the textile industry.

The objective of this research is to produce the low-cost activated carbon from Jatropha curcas L. by chemical activation using zinc chloride ZnCl2. The effects of the impregnation ratio on the surface and chemical properties of activated carbon were investigated. The impregnation ratio was selected at the range of 1:1-10:1 for investigation. The optimum conditions resulted in an activated carbon with a carbon content of 80% wt, while the specific surface area evaluated using nitrogen adsorption isotherm corresponds to 600 m2/g.

The ongoing advancement in the synthesis of new nanomaterials has accelerated the rapid development of non-enzymatic pesticide sensors based on electrochemical platforms. This study aims to develop and characterize Nano-ink for applying organophosphorus pesticides using paraoxon residue detection. Multi-walled carbon nanotubes, silicon carbide, and silver nanoparticles were used to create Nano-ink using a green synthesis process in 1:1:0, 1:1:0.5, and 1:1:1 ratios, respectively. These composites were combined with chitosan of varying molecular weights, which served as a stabilizing glue to keep the Nano-ink employed in a functioning electrode stable. By using X-ray powder diffraction, Raman spectroscopy, energy dispersive X-ray spectroscopy, and a field emission scanning electron microscope, researchers were able to examine the crystallinity, element composition, and surface morphology of Nano-ink. The performance of the proposed imprinted working electrode Nano-ink was investigated using cyclic voltammetry and differential pulse voltammetry techniques. The Cyclic voltammogram of Ag NPs/chitosan (medium, 50 mg) illustrated high current responses and favorable conditions of the Nano-ink modified electrode. Under the optimized conditions, the reduction currents of paraoxon using the DPV techniques demonstrated a linear reaction ranging between 0.001 and 1.0 µg/mL (R² = 0.9959) with a limit of detection of 0.0038 µg/mL and a limit of quantitation of 0.011 µg/mL. It was concluded that the fabricated Nano-ink showed good electrochemical activity for non-enzymatic paraoxon sensing.

In recent years, Thailand’s agriculture sector has seen a significant rise in pesticide usage due to its vital role in the economy and global food trade. However, the uncontrolled use of pesticides poses severe health and environmental risks. This research focuses on the detection of pesticide residues, particularly carbaryl and paraoxon-ethyl, which are prevalent due to their high efficacy in pest control but pose neurological health risks by inhibiting acetylcholinesterase (AChE) activity, potentially impacting human health. The developed method assesses pesticide concentration by measuring changes in the CIE-LAB color space using a smartphone camera. Testing several concentrations (0.2, 0.6, and 1.0 ppm) over time revealed significant differences via ANOVA (F = 32.8, p < 0.001) and a strong linear relationship with R² values from 0.9129 to 0.9973 through regression analysis. Additionally, principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) were utilized to further understand the relationship between color changes and pesticide type and concentration. PCA showed that the L* and b* values contributed most to explaining the variance in the data (96.24%), while PLS-DA provided classification models. These strong linear relationships between pesticide concentration and colorimetric changes showcase the method’s accuracy and potential for on-site pesticide monitoring in agricultural produce, emphasizing technological advancements in sustainable agriculture practices. This research presents encouraging findings from an inexpensive and straightforward method for detecting pesticide residues, suggesting that a specialized mobile application could enhance the implementation of the proposed system.