In crowded cities, many structures are often constructed in a very close vicinity; therefore, during severe earthquakes, pounding phenomenon occurs due to out-of-phase vibrations of adjacent structures. In this study, pounding of adjacent structures is investigated up to the occurrence of total collapse. The novelty of this study is performing incremental dynamic analyses to compute the seismic collapse capacities of both pounding structures in one model and removal of the collapsed structure during analysis, and proposing modification factors for modifying median collapse capacity of single structures to consider the effect of pounding, which cannot be considered before the design process. The results indicate that pounding may significantly affect median collapse capacities of structures compared with those obtained by neglecting the pounding phenomenon. Therefore, different modification factors are required according to structural characteristics. It is noteworthy that the results of this study were obtained using simplifying assumptions and should not be generalized.
9 April 2020 in Australian Journal of Structural Engineering
In the present research, the performance of steel special moment frames having one damaged column designed based on seismic provisions has been evaluated during the progressive collapse under the ground motions. For this purpose, five- and ten-story two-dimensional steel frames with four bays have been modelled by utilising OpenSees software with and without considering a weak column. Moreover, nonlinear incremental dynamic analyses (IDA) have been carried out on the structures under far and near-field ground motions. In the case of the model with a weak column, the potential of progressive collapse has been assessed using the Alternative Load Path Method recommended in the General Service Administration (GSA) guideline. In this state, due to the defect in the implementation of column splice, the damaged column represents a situation in which it is weak in terms of bending performance and collapsed by the earthquake. Furthermore, the effect of floor number, weakness of column, and the type of applied earthquake have been discussed. According to the obtained results, a structure including one damaged column has a weaker performance in the near-field compared with in the far-field ground motions before a progressive collapse.
21 August 2014 in International Journal of Advanced Structural Engineering
This paper deals with the detection of crack in frame structures based on Euler–Bernoulli beams theorem by the Spectral Element Method. The effect of cracking is modeled using Castigliano’s theorem and laws of fracture mechanics as mass-less rotational and translational springs which are embedded in different locations of the steel frame structure in both beam and column. The crack location is revealed precisely without prior knowledge of their positions in frame structure. This means that there is no necessity to know the location and the node number which is assigned to crack. Finally the effect of crack when it is embedded simultaneously in both beam and column members, is also studied.
In this article, a damage location in beam like-structure is determined using static and dynamic data obtained applying the finite volume method. The modification of static and dynamic displacement due to damage is applied to establish an indicator for determining the damage location. In order to assess the robustness of the proposed method for structural damage detection, three test examples including static analysis, free vibration analysis and buckling analysis for a simply supported beam having a number of damage scenarios are taken into account. The acquired results demonstrate that the method can accurately locate the single and multiple structural damages in considering the measurement noise. Finite volume method results provided in this study for finding the damage location is compared with the same indicator derived via finite element method in order to evaluate the efficiency of FVM. The acquired results are indicated a good match between both the Finite Volume method and Finite Element method, and there are rational correlations between them.