Bu çalışmada elektrikli araç (EA) teknolojileri, araç dinamiği ve asenkron motor parametreleri incelenmiştir. Araç dinamiği üzerine yapılan incelemelerden, binek bir araç için motor performans gereksinimleri hesaplanmıştır. Asenkron motor performans karakteristiği ve tasarım parametreleri ele alınarak değerlendirilmiştir. Arzu edilen motor performans gereksinimlerini elde etmek için, Taguchi metodu ile asenkron motor için önem derecesi düşük parametreler elenmiştir. Asenkron motor için kritik parametrelerin belirlenmesinin ardından motor parametreleri optimize edilerek tasarım tamamlanmıştır. Sonuç olarak Taguchi metodu ve belirlenen bir standart sapma değerini kullanarak asenkron motor tasarımında önem derecesi düşük parametrelerin elenmesiyle uzun analiz sürelerinden kaynaklanan zaman israfının önüne geçilmeye çalışılmıştır.
U radu se prikazuje određivanje kritičnih podataka pola rotora sinhronog motora s permanentnim magnetom (LSPMSM). Kritični podaci pola rotora LSPMSM-a s obzirom na faktor snage i učinkovitosti istražuju se pomoću Taguchi metode....
The regular inspection of the power transmission lines is essential for the uninterrupted transmission of electrical energy to demand points. This quickly requires actions with economically, efficiently, and safely. Therefore, the transmission line inspection robots are inevitable solution as an alternative to existing line inspection methods. This study present design and control of a transmission line inspection robot (I‐Robot). Since the I‐Robot exhibits nonlinear behavior and has multiple inputs and multiple outputs, a model reference‐based neural controller is determined to achieve nonlinear control. The robot design process consists of four stages which are kinematic modelling, dynamic modelling, actuator modelling and controller design. To meet inspection requirements, the conceptual design of the I‐Robot is performed, and the kinematic model are calculated in terms of the transformation matrices. According to the design requirements and system constraints, the dynamic model of the I‐Robot is created. To provide desired motions and trajectory tracking, the actuator models are determined. Then, the I‐Robot is prototyped. According to the dynamics of joint, robot and constraints, the system identification is performed to create reference model. During the system identification, the logged data are used the train the reference model. Finally, the desired trajectory for the driving cycles is created by manual excitation of the I‐Robot. During the manual excitation, the logged data are used to train the neural network (NN)‐based controller. Eventually, the I‐Robot is assessed under the test scenarios in term of the trajectory tracking performance as regression value and mean squared errors. According to the experiments, the neuron numbers and the training algorithm of the NN controller are determined. It was observed that the controller is quickly optimized with the adapting algorithm designed for the NN reference model. As a result, the performance of the model reference‐based neural controller was determined as 99%.