Haider hasan Jaber

Haider hasan Jaber


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2021 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
AHAli Hubi Haleem
Ali Hubi Haleem
HJHaider hasan Jaber
Haider hasan Jaber
BSBan Ahmed Shanan
Ban Ahmed Shanan
The powder metallurgy (PM) method was used to create the alloy. The sintering process was carried out in an inert high-temperature tube furnace in the presence of inert gas at a temperature of 1000 ° C for 8 hours (Argon). In this article, the effect of (B) at three wt.% (0.4,0.8,1.2) on the corrosion rate, hardness, and microstructure of alloys was examined. X-ray diffraction (XRD), open circuit potential, electrochemical tests (Tafel extrapolation method), and Macro hardness Brinell were used to study the effect of adding (B) in various amounts to alloys. Saliva was utilized as the corrosion solution for the testing. The inclusion of the alloy element (B) increased hardness and a decrease in particle size, as seen by the microstructures. Furthermore, the corrosion resistance of the master alloy improved next the addition, as shown by Corrosion potential has increased while corrosion current densities have decreased. The corrosion rate for A, A1, A2 and A3 was 14.50, 7.42, 2.03and 2.77 (mpy) respectively.

30 October 2023 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
SAsoodad abdullah alhiloh
soodad abdullah alhiloh
AAAseel muhammed sadiq Alkhafaji
Aseel muhammed sadiq Alkhafaji
HJHaider hasan Jaber
Haider hasan Jaber
Dental implants can be made of various materials, and amongst them, titanium and titanium alloy were the materials of choice for dental implants for many years because of their biocompatibility. The two alloys have a high level of biocompatibility, a lower modulus of elasticity, and better corrosion resistance than other alloys. Thus, they are frequently utilized in biomedical applications and mostly replace stiff fabrics. The latest advances in a new strontium oxide–cp titanium composite alloy are the main topic of this research. With regard to biomedical applications, additions of strontium oxide were synthesized at three distinct weight percentages (2%, 4%, and 6% by wt%). Powder metallurgy was used to create the alloys, which were then sintered by heating the samples. The effects of adding strontium oxide were analyzed by utilizing measurements of the Brinell hardness, X-ray diffraction, porosity, diametral tensile strength, roughness, and wettability of the finished surfaces. The results show that adding more strontium oxide (gradually increasing the ratio from 2% SrO to a 6% addition) raised the roughness and porosity. However, the microhardness and diametral tensile strength were enhanced with an increase in the volume fraction of strontium oxide particles. In conclusion, the alloy that contained 6 wt% strontium oxide microparticles had reasonably high mechanical properties and might be regarded as suitable for use in dental and medical applications due to its high wettability or, in other words, its low contact angle. The Brinell testing results for the diametral tensile strength, microhardness, and porosity of the generated strontium oxide–cp titanium composite alloy demonstrate its high potential for usage as a biomaterial, particularly in dental applications.

12 June 2024 in Salud, Ciencia y Tecnología - Serie de Conferencias
Verified
Journal Article
Open access
PDF file
HJHaider hasan Jaber
Haider hasan Jaber
BABasmal H Abdul Amir
Basmal H Abdul Amir
The purpose of this study is to investigate the impact of Tellurium alloying element (0.5, 1, 1.5 ,2 ,2.5 ,3,3.5 ,4 ,4.5 and 5 wt%) on corrosion resistance of Ti6Al4V alloy in Hank and saliva solutions. All alloys have been prepared by powder metallurgy technique, the compact pressure was determined as 800MP and the green samples sintered at 350 C0 for 1h then at 550 C0 for 1h and at 1000 C0 for 2 h in inert gas (of Argon), then the samples cooled in the furnace to room temperature. The microstructure was observed using a light optical microscope and has shown that all specimens of alloys contain two regions: the α-Ti phase and the β-Ti phase. Generally, compared with the base alloy, the addition of the Te element leads to an increase in the α-phase due to the effect of Te as the α stabilizer element. Electrochemical tests (potentiodynamic polarization and OCP – Time measurement) in Hank's and saliva solutions were used to evaluate corrosion resistance of Ti6Al4V alloy. When tellurium was added, the OCP shifted to the positive direction. This makes the alloy more noble and increases its resistance to corrosion by decreasing corrosion current density. The percentage of improvement ranges from 2.50% to 61.92% in saliva solution and from 16.27% to 88.32% in Hank's solution. For both solutions, the best percentage of improvement is 5% Te.

1 November 2020 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
DADuaa Amer Ali
Duaa Amer Ali
AHAli Hubi Haleem
Ali Hubi Haleem
HJHaider hasan Jaber
Haider hasan Jaber
CuAlMn-X (X= Ta, Zr and In) shape memory alloy was fabricated using the powder metallurgy (PM) technique. After sintering at 950 °C, the products were processed using two heat treatments (solution heat treatment at 900 °C and aging at 500 °C). The influence of Tantalum (Ta), Zirconium (Zr) and Indium (In) with three wt.% on the mechanicals properties (hardness), corrosion behaviour and microstructure of CuAlMn shape memory alloys was investigated in this paper. The effect of the addition of Ta, Zr and In alloys was investigated using X-rays diffraction (XRD), open circuit potential, electrochemical tests (Tafel extrapolation method) and Vickers micro-hardness. For the corrosion tests, a 3.5 % NaCl (chloride solution) was used as corrosion solution. The results showed that there is an increase in hardness with addition of the alloy element (Ta, Zr and In) and decrease in the size of martensite plate form, as shown in the microstructures. Furthermore, it was found that the corrosion resistance of Cu-Al-Mn after the addition improved, as shown by the increase in the corrosion potential and decrease in the corrosion current densities. The improvement percentage for CuAlMnTa, CuAlMnIn and CuAlMnZr in the corrosion rate was 97 %, 91 % and 77 %, respectively.