A wearable textile antenna with multiple resonance frequencies is proposed for the reception of FM signals using conductive embroidery of metal composite embroidery yarn (MCEY) on a polyester woven substrate. This embroidered FM antenna comprises five individual folded dipoles connected in parallel so that the bandwidth can be broadened via multiple resonances. The MCEY embroidered multiresonant folded dipole (MRFD) antenna is attached to a jacket, stretched from the left forearm, over the shoulder, and to the right forearm. The proposed antenna provides a wide operating band of 80.5 MHz to over 130 MHz at 5 dB return loss regardless of the arm movements, satisfying the FM broadcast band (87.5-108 MHz). The gain of this body-worn antenna is in the range of - 7.08 to - 15.79 dBd in the FM broadcast band regardless of the arm movements.
12 May 2015 in Journal of Intelligent Material Systems and Structures
The state-of-the-art in the field of smart interactive textiles is to develop a pure textile with smart electronics (all-fabric electronics). This article reports the production and testing of a temperature sensing and heating textile which consistently maintains a certain targeted temperature in order to provide optimal thermal comfort in everyday wear regardless of the internal microclimate and external climate conditions as well as the voltage level of the battery. The design and fabrication method of the robust, reliable, flexible, light, highly breathable, and simply constructed smart textile with dual functionality of temperature sensing and heating was explored with a metal composite embroidery yarn. The feasibility of the temperature regulating system based on the power on-off switching method referencing real-time temperature measured from the correlation between resistance and temperature of the heating metal composite embroidery yarn textile was shown. A uniform temperature distribution, a quick adjustment to a newly set temperature, and effective maintaining of a set temperature were identified. Many potential customized designs for smart garments will be possible in a wide range of fabric size, heating area, and different temperature requirement.
The design of textile touch sensing interaction was explored with the new metal composite embroidery yarns (MCEYs) and a simple and easy fabrication technique aimed towards robust and reliable pressure sensitive position sensors for wearable tangible interfaces. In this paper, the resistive sensing method of a potentiometer as an accurate positional indicator was chosen to make simple prototypes of MCEY embroidered touch sensors. A simple structure of embroidered potentiometer to create textile switches as an input device in a smart textile system was tested. Both one- and two-point sensing method were successfully demonstrated. A complete success rate on switching was observed. These simple but ingenious embroidered touch sensors showed the possibility of a soft, lightweight, flexible, freely foldable touchpad as a ubiquitous solution. It was also shown that these minimal fabrication technologies may be highly valued in the smart textile field thanks to their simplified interconnections, customizability and tailorability on double curvature surfaces.
The need for self-generating energy for outdoor environments is growing. To cope with emergencies in outdoor environments, sustainable, environment-independent energy-harvesting methods based on natural human movements are necessary. In this study, we developed a wearable energy-harvesting textile with a structure capable of generating the maximum energy from the swinging motion that occurs during walking. Two types of conductive yarn were manufactured and, when used as coils, are as durable as wire coils and have excellent flexibility and wearability, allowing easy integration into outdoor garments. Design variables related to the effect of energy production were investigated and the wearable energy-harvesting textile was evaluated by the average current generated. The conductive yarn coils can be connected in a serial circuit method and were evaluated to generate energy at a greater efficiency than wire coils. The average current increased as the number of turns of coil, the magnetic field, and the coil swing speed increased. The average currents along the distance between the magnet and the coil varied with magnet forces inversely proportional to distance.
4 October 2010 in International Journal of Fashion Design, Technology and Education
Owing to the rapid progress in fabrication technologies of conductive fibrous materials and the increasing demand for wireless communications in smart clothing systems, the potential application of wearable textile antennas in this field continues to increase. This article reviews a variety of wearable textile antennas in order to provide background information and application ideas for designing such antennas. The various materials used in the construction of wearable textile antennas, their fabrication methods, as well as the antenna types and their application fields are summarised. Owing to the high conductivity of metals, various metal composite yarns (MCYs) and fabrics have been used in the production of textile antennas. For inductively coupled near-field communication within smart clothing systems, woven or embroidered multiturn loop antennas are suggested. For far-field communication, a variety of broadband textile antennas were developed to counterbalance the detuning caused by the presence of a human body. Embroidered-folded dipole array antennas, metal-coated fabric patched bowtie and spiral antennas, a microstrip patch antenna array and a coplanar antenna made of metal-coated fabric patches and a ground plane, are the antennas that cover a broad spectrum and thus are capable of operating on the body.
Spinal disease is a common yet important condition that occurs because of inappropriate posture. Prevention could be achieved by continuous posture monitoring, but most measurement systems cannot be used in daily life due to factors such as burdensome wires and large sensing modules. To improve upon these weaknesses, we developed comfortable “smart wear” for posture measurement using conductive yarn for circuit patterning and a flexible printed circuit board (FPCB) for interconnections. The conductive yarn was made by twisting polyester yarn and metal filaments, and the resistance per unit length was about 0.05 Ω/cm. An embroidered circuit was made using the conductive yarn, which showed increased yield strength and uniform electrical resistance per unit length. Circuit networks of sensors and FPCBs for interconnection were integrated into clothes using a computer numerical control (CNC) embroidery process. The system was calibrated and verified by comparing the values measured by the smart wear with those measured by a motion capture camera system. Six subjects performed fixed movements and free computer work, and, with this system, we were able to measure the anterior/posterior direction tilt angle with an error of less than 4°. The smart wear does not have excessive wires, and its structure will be optimized for better posture estimation in a later study.