In low-lying coastal areas, the interplay of various factors including precipitation, river flow, and storm surge can lead to greater influence on floods when they occur simultaneously. The copula method was used in this study to investigate the bivariate flood risk of compounding storm surge and river discharge events in the Pearl River Delta (PRD). Our results indicate that while the correlation between storm surge and flood peak (S-Q) was weak, there was a strong dependence between the pairs of storm surge–flood volume (S-V) and storm surge–flood duration (S-D). For these three pairs, the Clayton copula was the optimal function for S-Q, while the Frank copula was the optimal function for S-V and S-D, respectively. When the flood volume exceeds 2.0 × 104 m3/s and the flood duration is more than 10 days, the bivariate hydrologic risk for S-V and S-D is observed to decrease rapidly. Furthermore, the failure probability (FP) would be underestimated when the combined impact of river flow and storm surge is ignored in coastal flood risk assessment. Such bivariate hydrologic risk analysis implies that when determining design values in coastal flood risk assessment, the combined impact of river flow and storm surge should be taken into account.
Roof water inrush in coal mining is a significant type of water-related disaster that usually results from the interconnection of water-bearing geological formations formed by cracks during and after work face mining. Therefore, monitoring roof water infiltration is of paramount importance in preventing or mitigating water inrush in the mine work face. This study employed the roof borehole electrical resistivity tomography method to conduct physical experiments for monitoring water seepage in roof cracks generated during coal model mining. Additionally, roof water infiltration monitoring was performed in the 7130 work face of the Qidong Coal Mine. The results of both physical experiments and field tests demonstrate that roof borehole electrical resistivity tomography (ERT) is well suited for monitoring roof water infiltration in mine work faces, enabling the determination of the temporal and spatial distributions of water seepage. By analyzing the variation patterns of low-resistivity anomalies in the resistivity profile, the water-conducting channels and water outflow points can be identified. Experiments and field tests suggest that the resistivity and its changes are related to the amount of water inflow and water channel. With the increase of water inflow, the relatively low resistivity anomalies region increases, the resistivity value decreases and the water channel appears and expands. With the amount of water inflow decreasing, the relatively low resistivity area becomes smaller, the resistivity value increases, and the water channel narrows or even disappears.Furthermore, by combining the areas of low-resistivity anomalies, a qualitative assessment of the water content can be achieved. Finally, The results of the periodic weighting analysis of the field tests indicate that roof water infiltration is related to periodic weighting. The greater the periodic weighting is, the more severe the roof water infiltration.
Groundwater contamination by trichloroethylene (TCE) presents a pressing environmental challenge with far-reaching consequences. Traditional remediation methods have shown limitations in effectively addressing TCE contamination. This study reviews the limitations of conventional remediation techniques and investigates the application of oxidant-based controlled-release materials, including encapsulated, loaded, and gel-based potassium permanganate since the year 2000. Additionally, it examines reductant controlled-release materials and electron donor-release materials such as tetrabutyl orthosilicate (TBOS) and polyhydroxybutyrate (PHB). The findings suggest that controlled-release materials offer a promising avenue for enhancing TCE degradation and promoting groundwater restoration. This study concludes by highlighting the future research directions and the potential of controlled-release materials in addressing TCE contamination challenges.
A novel prediction model for crack development of reinforced concrete (RC) piles with localized chloride corrosion in the marine environment is proposed. A discrete method is used to solve the corrosion pit radius model and a crack extension model is developed to investigate the initiation and extension of cracks. The maximum corrosion degree of the reinforced concrete pile is predicted according to the limit crack criterion, and finally, a sensitivity analysis is carried out on the important parameters of crack extension. The results show that the radius of the corrosion pit, the depth corrosion pit, and the cross-sectional area loss of reinforcement gradually increase as the corrosion level increases. The loss of the local reinforcement section at crack initiation increases with the increase in the ratio of concrete cover to initial diameter and increases with the increase in the pitting factor. The required pit depth for reinforcement cracking increases with the increase in the ratio of concrete cover thickness to diameter. The loss of the cross-sectional area of reinforcement and the radius of the corrosion pit increase with the increase in the initial diameter of reinforcement. Increasing the pitting factor can reduce the pit depth and make the crack width develop faster before reaching the limit crack width. Increasing the concrete cover thickness can provide an improvement in the propagation of cracks. A comparative analysis shows that the localized corrosion pattern is more in conformity with marine engineering practice.
Harnessing wave energy stands as a promising method to mitigate carbon dioxide emissions and address the global energy shortage. The strategic placement of wave energy converters (WECs) in offshore areas is contingent upon the distinctive features of the coastline and the topographical layout. This study is dedicated to scrutinizing the hydrodynamic characteristics and the wave energy absorption of a periodic array of flap-type WECs situated on a stepped bottom topography, strategically positioned in front of a straight coast. The coastline is modeled as a fully reflecting vertical wall. To analyze the oblique wave interaction with this system, we have developed a semi-analytical solution grounded in the linear potential flow theory. We evaluated key performance metrics, including hydrodynamic efficiency, reflection coefficient, wave excitation torque, added inertia torque, and radiation damping. Case studies were conducted to assess the impacts of varying parameters, such as the distance between the flap and the wall, the wave depth above the step, the incident angle, and the step length on the hydrodynamic performance of the current system. The results underscore the substantial influence of the distance between the flap and the coastal wall on wave power efficiency. The trigger condition's frequency downshift, indicative of the standing wave field between the flap and the coastal wall, is observed with a reduction in the wave depth above the step, in contrast to scenarios without the step. In addition, wave resonance above the stepped bottom topography amplifies wave power extraction, albeit with the caveat of a diminished hydrodynamic efficiency due to the presence of Rayleigh–Bloch waves.
Integrating wave energy devices with breakwaters can offer an innovative and sustainable approach by combining wave power extraction with wave attenuation. The performance of this integrated system in offshore areas is influenced by the unique characteristics of the coastline. In this paper, a semi-analytical solution was developed using the matching eigenfunction method for the oscillating water column device integrated into a pile-supported breakwater in front of a partially reflective seawall. The model was validated through the energy conservation law, the Haskind relationship, and experimental data. Detailed examinations were conducted on the effects of the seawall's reflection coefficients, the distance between the system and the seawall, the wall draft, and the chamber breadth on hydrodynamic performance. Results show that the presence of the seawall significantly influences hydrodynamic coefficients (hydrodynamic efficiency, reflection coefficient, the relative transmitted amplitude, etc.), accompanied by the piston and sloshing mode resonances inside the chamber and the confined area between the system and the seawall. Due to energy dissipated by a partially reflective seawall, the magnitude of those hydrodynamic coefficients is mitigated, together with the piston and sloshing mode resonances inside the air chamber. The cancellation of the sloshing mode resonance inside the confined area is observed for the smaller seawall's reflection coefficient. The maximum and minimum hydrodynamic efficiency occur when the system is arranged at the wave nodes and antinodes of the formed standing wave field. Lower wave reflection and better wave power extraction can be achieved by properly adjusting the chamber drafts and breadths.