Gianluca De Marzi

Dr. Gianluca De Marzi


Research Focus & Metrics

Academic Career Length

30Years (1997-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 March 2007 in Analytical Chemistry
Verified
Journal Article
Closed access
YLYvonne H. Lanyon
Yvonne H. Lanyon
Gianluca De MarziGianluca De Marzi
Gianluca De Marzi
YWYvonne E. Watson
Yvonne E. Watson
AQAidan J. Quinn
Aidan J. Quinn
JGJames P. Gleeson
James P. Gleeson
DADamien W. M. Arrigan
Damien W. M. Arrigan

1 June 2014 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
GCG. Celentano
G. Celentano
Gianluca De MarziGianluca De Marzi
Gianluca De Marzi
FFF. Fabbri
F. Fabbri
LML. Muzzi
L. Muzzi
GTG. Tomassetti
G. Tomassetti
ACA. della Corte
A. della Corte
Taking advantage of the large experience of the ENEA Superconducting Laboratory in the manufacture and characterization of large scale superconducting systems, a project was launched, aimed at using High Temperature Superconductor (HTS) 2G wires for the manufacture of a cable-in-conduit conductor (CICC). In particular, the main aim was the definition of a conductor design fully compatible with existing cabling technologies, to be promptly transferred to an industrial scale production. The considered layout is based on 150 HTS tapes, arranged as five layered structures of twisted tapes wound on a helically slotted core with external round jacket. All manufacturing steps (slotted core production, tape stacking and insertion into the ducts, external wrapping and jacketing) are fulfilled by using equipments and technologies available at TRATOS Cavi S.p.A. These CICCs are intended for operation using forced flow of Helium. A 2D local thermal model has been developed for the optimization of the cooling configuration. This conductor is designed to target 20 kA at 4.2 K and 15 T (or, alternatively, higher temperature, in self-field and LN2 cooling) corresponding to a Je of about 55 A/mm2. The production of a short dummy sample revealed that the exploited industrial production process is very promising for the development of HTS CICC.

19 March 2015 in Superconductor Science and Technology
Verified
Journal Article
Closed access
LML Muzzi
L Muzzi
Gianluca De MarziGianluca De Marzi
Gianluca De Marzi
AZA Di Zenobio
A Di Zenobio
ACA della Corte
A della Corte
We review progress in the design of high field superconducting cable-in-conduit conductors (CICCs) for fusion applications, with special attention to the results of recent key experiments, leading to the state-of-the-art CICC technology: the ITER Toroidal Field and Central Solenoid programs, the EFDA Dipole conductor development program, the NHFML Hybrid Magnet project, the EU-TF Alt conductor demonstration, and the CRPP React & Wind flat cable test. For these projects, the main CICC design driver was the mitigation of Nb 3 Sn conductor performance degradation with electro-magnetic loading cycles. This was achieved by proper choice of cable layout and of conductor geometry, depending on the specific operating conditions and project requirements. In all cases, the necessity to limit cable movements inside the conductor jacket was identified to be of crucial importance. The main aspects of CICC manufacture are also discussed here, at least for what is the experience gained by the authors in both CICC jacketing and cabling processes. Finally, the state of the art of high-temperature superconducting (HTS) cables is discussed: at present, this technology is still in its infancy, but it is highly likely that major technological improvements could eventually lead to a widespread use of HTS CICCs.

11 January 2002 in The Journal of Physical Chemistry B
Verified
Journal Article
Closed access
CBC. Boissière
C. Boissière
JBJ. B. Brubach
J. B. Brubach
AMA. Mermet
A. Mermet
Gianluca De MarziGianluca De Marzi
Gianluca De Marzi
CBC. Bourgaux
C. Bourgaux
PRP. Roy
P. Roy

15 September 2004 in Journal of Applied Physics
Verified
Journal Article
Closed access
Gianluca De MarziGianluca De Marzi
Gianluca De Marzi
DID. Iacopino
D. Iacopino
AQA. J. Quinn
A. J. Quinn
GRGareth Redmond
Gareth Redmond
The transport characteristics of 70-nm-diameter platinum nanowires (NWs), fabricated using a pore-templated electrodeposition process and individually contacted using a focused ion beam (FIB) method, are reported. This approach yields nanowire devices with low contact resistances (∼400Ω) and linear current–voltage characteristics for current densities up to 65kA∕cm2. The intrinsic nanowire resistivity (33±5μΩcm) indicates significant contributions from surface- and grain-boundary scattering mechanisms. Fits to the temperature dependence of the intrinsic NW resistance confirm that grain-boundary scattering dominates surface scattering (by more than a factor of 2) at all temperatures. Our results demonstrate that FIB presents a rapid and flexible method for the formation of low-resistance ohmic contacts to individual metal nanowires, allowing intrinsic nanowire transport properties to be probed.

1 November 1999 in Physical Review B
Verified
Journal Article
Closed access
PDF file
IFI. Fedorov
I. Fedorov
José LorenzanaJosé Lorenzana
José Lorenzana
PDP. Dore
P. Dore
Gianluca De MarziGianluca De Marzi
Gianluca De Marzi
PMP. Maselli
P. Maselli
RMR. Migoni
R. Migoni
The infrared absorption spectra of polycrystalline LaMnO3 and CaMnO3 measured in the frequency range of the transverse optical phonons are reported, discussed, and compared with calculations of the lattice dynamics. For LaMnO3 the measured spectrum is consistent with the expected orthorhombic structure. For CaMnO3 the spectrum reflects a symmetry lower than that of a cubic perovskite. We find a close correspondence between the spectra of the two materials which suggests a similarity in their structures.