Biofuel, an inexhaustible fuel source, plays a pivotal role in the contemporary era by diminishing the dependence on non-renewable energy sources and facilitating the mitigation of CO2 emissions. Due to the many constraints in existing technology and the resulting increased costs, the production of biofuels on a large scale is a laborious process. Furthermore, the methods used to convert varied feedstock into the intended biofuel may vary based on the specific techniques and materials involved. The demand for bioethanol is increasing worldwide due to the implementation of regulations by world nations that mandates the blending of bioethanol with petrol. In this regard, second-generation bioethanol made from lignocellulosic biomass is emerging at a rapid rate. Pre-treatment, hydrolysis, and fermentation are some of the technical, practical, and economic hurdles that the biochemical conversion method must overcome. Nanoparticles (NPs) provide a very effective approach to address the present obstacles in using biomass, due to their selectivity, energy efficiency, and time management capabilities, while also reducing costs. NPs smaller dimensions allow them to be more effective at interacting with lignocellulosic components at low concentrations to release carbohydrates that can be utilized to produce bioethanol. This article provides a concise overview of various biofuels and the nanotechnological advancements in producing it, with a particular emphasis on ethanol. It provides a detailed discussion on the application of nanotechnology at each stage of ethanol production, with a particular emphasis on understanding the mechanism of how nanoparticles interact with lignocellulose.
The aim of this work was to apply a modeling integrated optimisation approach for a complex, highly nonlinear system for an extracellular lipase extraction process. The model was developed using mutation, crossover and selection variables of Differential Evolution (DE) based on central composite design of Response Surface Methodology. The experimentally validated model was optimized by DE, a robust evolutionary optimization tool. A maximum lipase activity of 134.13 U/gds (more than 36.28 U/gds compared to one variable at a time approach) was observed with the DE-stated optimum values of 25.01% dimethyl sulfoxide concentration, 40 mM buffer, 128.52 min soaking time and 35ºC with the DE control parameters, namely number of population, generations, crossover operator and scaling factor as 20, 50, 0.5 and 0.25, respectively. The use of DE approach improved the optimization capability and decision speed, resulting in an improved yield of 36.28 U/gds compared to the one variable at a time approach for the extracellular lipase activity under the non-optimized conditions. The developed mathematical model and optimization were generic in nature, which seemed to be useful for the scale-up studies of maximum recovery of lipase from the fermented biomass
23 January 2026 in Biomass Conversion and Biorefinery