The marine shale in the Sinian Doushantuo Formation of Qinglinkou outcrop section is well developed, but the current characterization methods for outcrops are unsatisfactory. In this paper, the data of outcrop in the field study area were collected by Unmanned Aerial Vehicle, then processed and interpreted by oblique photography technology combined with manual investigation. Subsequently, we established a quantitative geological knowledge database of the shale formations and carried out the typical section of anatomy analysis. The results showed that the high-precision image information captured by unmanned aerial vehicle oblique photography technology can be well coupled with a three-dimensional coordinate system. The three-dimensional digital model was used to characterize the lithologic assemblage, thickness and distribution characteristics of the target reservoir. Based on this digital model, we established the three-dimensional lithology and the total organic carbon models of the outcrop area. The spatial distribution characteristics of interbedding between marine dolomite and shale in the outcrop area were displayed, and the distribution of total organic carbon was revealed under lithological constraints. The models are beneficial for the analysis and prediction of the lithology and total organic carbon, which is of great significance to the understanding of shale gas sweet spots.

Carbazole compounds are widely used in determining the direction of petroleum migration, but the effect of thermal maturity on carbazoles is still ambiguity. In this paper, using compaction pyrolysis simulation experiments, artificial mature samples with vitrinite reflectance (R_o) range from 0.38 to 3.0% were acquired. And the content and composition change characteristics of carbazole compounds were analyzed in coal source rocks. The experimental results showed that thermal maturity controls the generation of a large amount of carbazole compounds in coal rocks. Compared with the low mature stage, the content of carbazole compounds was about 10–100 times higher in the mature stage. With the increasing maturity, in the coal sample, the content of carbazole compounds showed a trend of first increasing and then decreasing. In derivatives of carbazole, the corresponding maturity for the maximum generation of ethylcarbazole (EC), dimethylcarbazole (DMCA), methylcarbazole (MCA), carbazole (CA) and benzocarbazole (BCA) performed the increasing sequence. With the increasing maturity, the relative abundance of 2-MCA, 1,7-DMCA and benzo[a]carbazole increased with the increasing maturity, while 4-MCA, 1,4-DMCA and benzo[c]carbazole gradually decreased. Benzocarbazole ratio [a]/[a] +[ c] varies only in a narrow range 0.36–0.61 in the entire maturity range, suggesting limited maturity dependence. The experimental conclusion provides more theoretical basis for future geochemical analysis using carbazole compounds.

In order to analyze the organic matter (OM) composition, this study carefully identified the OM types of 66 samples from Well A in the Dingshan area under microscope, and made an effort to obtain the semi-quantitative statistics contents of different bio-precursor derived OM. The results of OM content obtained under microscope showed a strong positive relationship (R² = 0.85) with the TOC content analyzed by carbon–sulfur analyzer. The OM contained bethic algae debris, phytoplankton amorphous organic matter (AOM), acritarch, vitrinite-like particles, zooplankton (including graptolite, chitinozoa and others) and solid bitumen which was secondary formation OM. The phytoplankton AOM, graptolite and solid bitumen were the dominated OM in this interval. Solid bitumen (8%~11%) was filled at the bottom of the Wufeng Formation, which could be one reason for the high shale gas production in the lower part of this shale interval. N₂ adsorption results showed that micropores and mesopores were predominant in this shale gas system, while pore volumes illustrated better positive relationships with organic matter than minerals, especially AOM content. Thus, both solid bitumen and AOM kerogen were the main sources for shale gas generation in this shale gas system.

Object detection in complex environments remains challenging due to illumination variations, background clutter, and the presence of small objects. Multimodal detection methods based on RGB and infrared (IR) data have shown promising potential by leveraging complementary information across modalities. However, existing approaches still suffer from cross-modal feature misalignment, loss of fine-grained details, and insufficient semantic interaction. In this work, we introduce a novel dual-stream framework called DMNet, specifically tailored for visible and IR multimodal object detection. The architecture integrates four core components designed to tackle these challenges: surface detail fusion (SDF) for shallow feature alignment, wavelet feature extraction (WFE) for frequency-domain enhancement, context-guided enhancement (CGE) for semantic refinement, and adaptive spatial fusion (ASF) for multi-scale feature aggregation. We conduct extensive evaluations on three benchmark datasets, including M3FD, LLVIP, and VEDAI, demonstrating that DMNet achieves superior detection performance compared with existing methods. Experimental results confirm that DMNet outperforms existing approaches, achieving an mAP@0.5 of 78.4% on M3FD, 94.4% on LLVIP, and 59.0% on VEDAI. Notably, the model maintains a relatively compact parameter scale (5.72 million parameters) while achieving superior detection performance, making it suitable for practical deployment. These findings highlight DMNet as an effective and efficient solution for multimodal object detection under challenging conditions, especially in low-light and small-object scenarios.

Carbazole compounds are widely used in determining the direction of hydrocarbon migration, but the effect of thermal maturity on carbazoles remains unclear. In this paper, using compaction pyrolysis simulation experiments, artificial mature samples with vitrinite reflectance (R_o) range from 0.38–3.0% were acquired. And the content and composition change characteristics of carbazole compounds were analyzed. The results showed that thermal maturity had a significant influence on the content of carbazole compounds. Compared with the low mature stage, the content of carbazole compounds was about 10 to 100 times higher in the mature stage. With the increasing maturity, in the coal sample, the content of carbazole compounds showed a trend of first increasing and then decreasing. The formation of carbazole compounds was later than generation of hydrocarbon, suggesting carbazoles mainly produced by the thermal degradation of kerogen. In derivatives of carbazole, the corresponding maturity for the maximum generation of ethylcarbazole (EC), dimethylcarbazole (DMCA), methylcarbazole (MCA), carbazole (CA) and benzocarbazole (BCA) performed the increasing sequence. The timing of reaching the maximum content of carbazole compounds is related to the number and type of substituents. The more substituents and longer branches result earlier formation peak. With the increasing maturity, the relative abundance of 2-MCA, 1,7-DMCA and benzo[a]carbazole increased with the increasing maturity, the relative abundance of 1,5-DMCA remained almost unchanged, while 4-MCA, 1,4-DMCA and benzo[c]carbazole gradually decreased. The commonly used parameters as indicators of hydrocarbon migration were greatly affected by maturity. Therefore, when using carbazole compounds as geochemical parameters, it is necessary to fully consider the impact of thermal maturity on them, and avoid transport fractionation or other factors masking the true maturity effect.

Although abundant unconventional oil resources have been discovered in conglomerate and sandstone reservoirs in rift basins, the mechanism of differential pore evolution in conglomerates and sandstone reservoirs within different secondary structural zones of rift basins is not yet clear. The pore structures of conglomerate and sandstone reservoirs in the distinct secondary structural zones in the Chezhen Sag were quantified in three dimensions using high-resolution microcomputed tomography (micro-CT). Thin section and scanning electron microscopy observations were used to investigate the differential evolution mechanisms of conglomerate and sandstone reservoirs. Micro-CT analysis of the pore structures of conglomerate and sandstone reservoirs revealed that sandstone reservoirs are superior to conglomerate reservoirs with regard to the pore number and pore connectivity and that sandstone reservoirs are more heterogeneous than conglomerate reservoirs. Triangles dominate the pore and pore throat geometries of sandstone and conglomerate reservoirs, while the sandstone reservoir pores are more regular than conglomerate reservoir pores. The depositional environment, mineral composition, and diagenetic intensity jointly control the quality of the reservoirs. Because of the lengthy transportation distance of their parent rocks, the compositional maturity and sorting behavior of sandstone reservoirs in depression and gentle slope zones are better than those of conglomerate reservoirs in steep slope zones, and thus sandstone reservoirs have a higher initial porosity than conglomerate reservoirs. The rapid compaction experienced by the conglomerate reservoirs in steep slope zones in their early stages creates a closed diagenetic environment, making it difficult to effectively improve reservoir porosity through dissolution. However, the widely developed microfractures in the reservoirs provide channels for fluid migration, promote the development of dissolution pores, and form a tight reservoir dominated by secondary pores. With weak compaction and an open diagenetic environment, the primary pores in sandstone reservoirs in the gentle slope zone are preserved in large quantities. Meanwhile, dissolution expands the secondary pores of the reservoir, resulting in a high-quality reservoir having both primary and secondary pores. In addition, an approach based on primary, secondary, and total porosity was proposed in the study to efficiently evaluate reservoir quality and identify reservoir evolution mechanisms.